Messages in this thread | | | From | Marcello Sylvester Bauer <> | Subject | [PATCH v3 0/4] Support pli1209bc Digital Supervisor | Date | Mon, 14 Feb 2022 22:44:52 +0100 |
| |
Hi,
This patch set adds support for PLI1209BC Digital Supervisor from Vicor Corporation. It replaces the previous submitted driver "bcm6123" [1], since there are multiple digital supervisors, which uses BCMs in different configurations [2].
Change in v3: - prevent potential over- or underflow of PMBUS_READ_POUT
Changes in v2: - Multiply PMBUS_READ_POUT with 10 (R=1) instead of dividing PMBUS_READ_PIN by 10. - Set all pmbus formats to direct. - Comment reason why page 0 is redundant. - Import pmbus namespace.
[1]: https://www.spinics.net/lists/linux-hwmon/msg14097.html [2]: https://www.spinics.net/lists/linux-hwmon/msg14123.html
Marcello Sylvester Bauer (4): dt-bindings: vendor-prefixes: add Vicor Corporation dt-bindings:trivial-devices: Add pli1209bc pmbus: Add support for pli1209bc pmbus (pli1209bc): Add regulator support
.../devicetree/bindings/trivial-devices.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + Documentation/hwmon/pli1209bc.rst | 73 +++++++++ drivers/hwmon/pmbus/Kconfig | 16 ++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/pli1209bc.c | 146 ++++++++++++++++++ 6 files changed, 240 insertions(+) create mode 100644 Documentation/hwmon/pli1209bc.rst create mode 100644 drivers/hwmon/pmbus/pli1209bc.c
-- 2.34.1
| |