lkml.org 
[lkml]   [2022]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] Input: edt-ft5x06 - Improve configuration
Date
The series was born from the analysis and mitigation of a crc problem
raised by an M06 type device. The added sysfs attributes were helpful
in debugging the problem. Patches that change the report rate on driver
probing, mitigated crc errors on kernel bootup. The patch to get/set
report rate by sysfs for an M12 device, has been tested.


Dario Binacchi (6):
dt-bindings: input: touchscreen: edt-ft5x06: add report-rate
Input: edt-ft5x06 - get/set M12 report rate by sysfs
Input: edt-ft5x06 - set report rate by dts property
Input: edt-ft5x06 - show model name by sysfs
Input: edt-ft5x06 - show firmware version by sysfs
Input: edt-ft5x06 - show crc and header errors by sysfs

.../input/touchscreen/edt-ft5x06.yaml | 8 ++
drivers/input/touchscreen/edt-ft5x06.c | 81 +++++++++++++++++--
2 files changed, 81 insertions(+), 8 deletions(-)

--
2.32.0

\
 
 \ /
  Last update: 2022-02-13 18:17    [W:0.051 / U:1.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site