lkml.org 
[lkml]   [2022]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 15/16] dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer
From
On 07/12/2022 06:54, Kunihiko Hayashi wrote:
> Add DT binding schema for components belonging to the platform-specific
> DWC3 USB glue layer implemented in UniPhier SoCs.
>
> This USB glue layer works as a sideband logic for the host controller,
> including core reset, vbus control, PHYs, and some signals to the
> controller.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
> .../socionext,uniphier-dwc3-glue.yaml | 106 ++++++++++++++++++
> 1 file changed, 106 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
> new file mode 100644
> index 000000000000..1b5585a5a3a2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
> @@ -0,0 +1,106 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-dwc3-glue.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Socionext UniPhier SoC DWC3 USB3.0 glue layer
> +
> +maintainers:
> + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> +
> +description: |+
> + DWC3 USB3.0 glue layer implemented on Socionext UniPhier SoCs is
> + a sideband logic handling signals to DWC3 host controller inside
> + USB3.0 component.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - socionext,uniphier-pro4-dwc3-glue
> + - socionext,uniphier-pro5-dwc3-glue
> + - socionext,uniphier-pxs2-dwc3-glue
> + - socionext,uniphier-ld20-dwc3-glue
> + - socionext,uniphier-pxs3-dwc3-glue
> + - socionext,uniphier-nx1-dwc3-glue
> + - const: simple-mfd
> +
> + reg:
> + maxItems: 1
> +
> + '#address-cells':

Use consistent quotes - either ' or "

> + const: 1
> +
> + '#size-cells':
> + const: 1
> +
> + ranges: true
> +
> +patternProperties:
> + "^reset-controller@[0-9a-f]+$":
> + $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml#
> +
> + "^regulator@[0-9a-f]+$":
> + $ref: /schemas/regulator/socionext,uniphier-regulator.yaml#
> +
> + "^phy@[0-9a-f]+$":
> + oneOf:
> + - $ref: /schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
> + - $ref: /schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +

You need to fix
Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
example. I propose to drop usb-glue@65b00000 from that file. It's not
relevant to that example.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-12-08 09:24    [W:0.140 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site