lkml.org 
[lkml]   [2022]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 15/16] dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer
Date
Add DT binding schema for components belonging to the platform-specific
DWC3 USB glue layer implemented in UniPhier SoCs.

This USB glue layer works as a sideband logic for the host controller,
including core reset, vbus control, PHYs, and some signals to the
controller.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
.../socionext,uniphier-dwc3-glue.yaml | 106 ++++++++++++++++++
1 file changed, 106 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
new file mode 100644
index 000000000000..1b5585a5a3a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-dwc3-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC DWC3 USB3.0 glue layer
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+ DWC3 USB3.0 glue layer implemented on Socionext UniPhier SoCs is
+ a sideband logic handling signals to DWC3 host controller inside
+ USB3.0 component.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - socionext,uniphier-pro4-dwc3-glue
+ - socionext,uniphier-pro5-dwc3-glue
+ - socionext,uniphier-pxs2-dwc3-glue
+ - socionext,uniphier-ld20-dwc3-glue
+ - socionext,uniphier-pxs3-dwc3-glue
+ - socionext,uniphier-nx1-dwc3-glue
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^reset-controller@[0-9a-f]+$":
+ $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml#
+
+ "^regulator@[0-9a-f]+$":
+ $ref: /schemas/regulator/socionext,uniphier-regulator.yaml#
+
+ "^phy@[0-9a-f]+$":
+ oneOf:
+ - $ref: /schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
+ - $ref: /schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ usb@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd";
+ reg = <0x65b00000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ reset-controller@0 {
+ compatible = "socionext,uniphier-ld20-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ regulator@100 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ phy@200 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ };
+
+ phy@300 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 18>;
+ };
+ };
+
--
2.25.1
\
 
 \ /
  Last update: 2022-12-07 06:55    [W:0.163 / U:2.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site