lkml.org 
[lkml]   [2022]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 02/11] iio: light: tsl2563: Use i2c_smbus_write_word_data() in tsl2563_configure()
Date
Driver already uses the word accessors when it makes sense, but
in the tsl2563_configure(). Switch the latter to use word accessor.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
---
drivers/iio/light/tsl2563.c | 52 ++++++++++++++-----------------------
1 file changed, 19 insertions(+), 33 deletions(-)

diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index 71302ae864d9..d836c15ba777 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -49,16 +49,12 @@

#define TSL2563_REG_CTRL 0x00
#define TSL2563_REG_TIMING 0x01
-#define TSL2563_REG_LOWLOW 0x02 /* data0 low threshold, 2 bytes */
-#define TSL2563_REG_LOWHIGH 0x03
-#define TSL2563_REG_HIGHLOW 0x04 /* data0 high threshold, 2 bytes */
-#define TSL2563_REG_HIGHHIGH 0x05
+#define TSL2563_REG_LOW 0x02 /* data0 low threshold, 2 bytes */
+#define TSL2563_REG_HIGH 0x04 /* data0 high threshold, 2 bytes */
#define TSL2563_REG_INT 0x06
#define TSL2563_REG_ID 0x0a
-#define TSL2563_REG_DATA0LOW 0x0c /* broadband sensor value, 2 bytes */
-#define TSL2563_REG_DATA0HIGH 0x0d
-#define TSL2563_REG_DATA1LOW 0x0e /* infrared sensor value, 2 bytes */
-#define TSL2563_REG_DATA1HIGH 0x0f
+#define TSL2563_REG_DATA0 0x0c /* broadband sensor value, 2 bytes */
+#define TSL2563_REG_DATA1 0x0e /* infrared sensor value, 2 bytes */

#define TSL2563_CMD_POWER_ON 0x03
#define TSL2563_CMD_POWER_OFF 0x00
@@ -161,24 +157,16 @@ static int tsl2563_configure(struct tsl2563_chip *chip)
chip->gainlevel->gaintime);
if (ret)
goto error_ret;
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2563_CMD | TSL2563_REG_HIGHLOW,
- chip->high_thres & 0xFF);
- if (ret)
- goto error_ret;
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2563_CMD | TSL2563_REG_HIGHHIGH,
- (chip->high_thres >> 8) & 0xFF);
+ ret = i2c_smbus_write_word_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_HIGH,
+ chip->high_thres);
if (ret)
goto error_ret;
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2563_CMD | TSL2563_REG_LOWLOW,
- chip->low_thres & 0xFF);
+ ret = i2c_smbus_write_word_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_LOW,
+ chip->low_thres);
if (ret)
goto error_ret;
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2563_CMD | TSL2563_REG_LOWHIGH,
- (chip->low_thres >> 8) & 0xFF);
/*
* Interrupt register is automatically written anyway if it is relevant
* so is not here.
@@ -325,13 +313,13 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip)

while (retry) {
ret = i2c_smbus_read_word_data(client,
- TSL2563_CMD | TSL2563_REG_DATA0LOW);
+ TSL2563_CMD | TSL2563_REG_DATA0);
if (ret < 0)
goto out;
adc0 = ret;

ret = i2c_smbus_read_word_data(client,
- TSL2563_CMD | TSL2563_REG_DATA1LOW);
+ TSL2563_CMD | TSL2563_REG_DATA1);
if (ret < 0)
goto out;
adc1 = ret;
@@ -584,20 +572,18 @@ static int tsl2563_write_thresh(struct iio_dev *indio_dev,
{
struct tsl2563_chip *chip = iio_priv(indio_dev);
int ret;
- u8 address;
+
+ mutex_lock(&chip->lock);

if (dir == IIO_EV_DIR_RISING)
- address = TSL2563_REG_HIGHLOW;
+ ret = i2c_smbus_write_word_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_HIGH, val);
else
- address = TSL2563_REG_LOWLOW;
- mutex_lock(&chip->lock);
- ret = i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | address,
- val & 0xFF);
+ ret = i2c_smbus_write_word_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_LOW, val);
if (ret)
goto error_ret;
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2563_CMD | (address + 1),
- (val >> 8) & 0xFF);
+
if (dir == IIO_EV_DIR_RISING)
chip->high_thres = val;
else
--
2.35.1
\
 
 \ /
  Last update: 2022-12-07 20:05    [W:1.514 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site