lkml.org 
[lkml]   [2022]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 03/11] iio: light: tsl2563: Configure INT in one place
Date
Introduce tsl2563_configure_irq() to configure INT in one place.

While at it, make use of TSL2563_INT_LEVEL and newly introduced
TSL2563_INT_MASK.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
---
drivers/iio/light/tsl2563.c | 42 ++++++++++++++++++++++---------------
1 file changed, 25 insertions(+), 17 deletions(-)

diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index d836c15ba777..d071805239ef 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -69,6 +69,7 @@

#define TSL2563_INT_DISABLED 0x00
#define TSL2563_INT_LEVEL 0x10
+#define TSL2563_INT_MASK 0x30
#define TSL2563_INT_PERSIST(n) ((n) & 0x0F)

struct tsl2563_gainlevel_coeff {
@@ -211,6 +212,24 @@ static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
return 0;
}

+static int tsl2563_configure_irq(struct tsl2563_chip *chip, bool enable)
+{
+ int ret;
+
+ chip->intr &= ~TSL2563_INT_MASK;
+ if (enable)
+ chip->intr |= TSL2563_INT_LEVEL;
+
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_INT,
+ chip->intr);
+ if (ret < 0)
+ return ret;
+
+ chip->int_enabled = enable;
+ return 0;
+}
+
/*
* "Normalized" ADC value is one obtained with 400ms of integration time and
* 16x gain. This function returns the number of bits of shift needed to
@@ -620,9 +639,7 @@ static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev,
int ret = 0;

mutex_lock(&chip->lock);
- if (state && !(chip->intr & 0x30)) {
- chip->intr &= ~0x30;
- chip->intr |= 0x10;
+ if (state && !(chip->intr & TSL2563_INT_MASK)) {
/* ensure the chip is actually on */
cancel_delayed_work_sync(&chip->poweroff_work);
if (!tsl2563_get_power(chip)) {
@@ -633,18 +650,11 @@ static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev,
if (ret)
goto out;
}
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2563_CMD | TSL2563_REG_INT,
- chip->intr);
- chip->int_enabled = true;
+ ret = tsl2563_configure_irq(chip, true);
}

- if (!state && (chip->intr & 0x30)) {
- chip->intr &= ~0x30;
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2563_CMD | TSL2563_REG_INT,
- chip->intr);
- chip->int_enabled = false;
+ if (!state && (chip->intr & TSL2563_INT_MASK)) {
+ ret = tsl2563_configure_irq(chip, false);
/* now the interrupt is not enabled, we can go to sleep */
schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
}
@@ -668,7 +678,7 @@ static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev,
if (ret < 0)
return ret;

- return !!(ret & 0x30);
+ return !!(ret & TSL2563_INT_MASK);
}

static const struct iio_info tsl2563_info_no_irq = {
@@ -796,9 +806,7 @@ static void tsl2563_remove(struct i2c_client *client)
if (!chip->int_enabled)
cancel_delayed_work_sync(&chip->poweroff_work);
/* Ensure that interrupts are disabled - then flush any bottom halves */
- chip->intr &= ~0x30;
- i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | TSL2563_REG_INT,
- chip->intr);
+ tsl2563_configure_irq(chip, false);
tsl2563_set_power(chip, 0);
}

--
2.35.1
\
 
 \ /
  Last update: 2022-12-07 20:04    [W:0.969 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site