Messages in this thread Patch in this message | | | From | Quentin Schulz <> | Subject | [PATCH v3 8/9] arm64: dts: qcom: msm8998-fxtec: fix touchscreen reset GPIO polarity | Date | Mon, 5 Dec 2022 14:40:37 +0100 |
| |
From: Quentin Schulz <quentin.schulz@theobroma-systems.com>
The reset line is active low for the Goodix touchscreen controller so let's fix the polarity in the Device Tree node.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> --- arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 429ba57e20f71..8f738cade2652 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -249,7 +249,7 @@ touchscreen@14 { reg = <0x14>; interrupt-parent = <&tlmm>; interrupts = <125 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; AVDD28-supply = <&vreg_l28_3p0>; VDDIO-supply = <&ts_vio_vreg>; pinctrl-names = "active"; -- b4 0.10.1
| |