lkml.org 
[lkml]   [2022]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 7/9] arm64: dts: librem5: fix touchscreen reset GPIO polarity
Date
From: Quentin Schulz <quentin.schulz@theobroma-systems.com>

The reset line is active low for the Goodix touchscreen controller so
let's fix the polarity in the Device Tree node.

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 6445c6b90b5bb..b038300812b1e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -542,7 +542,7 @@ touchscreen@5d {
pinctrl-0 = <&pinctrl_ts>;
interrupt-parent = <&gpio3>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <720>;
touchscreen-size-y = <1440>;
--
b4 0.10.1

\
 
 \ /
  Last update: 2022-12-05 14:43    [W:0.374 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site