lkml.org 
[lkml]   [2022]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ASoC: dt-bindings: maxim,max98504: Convert to DT schema
Date
Convert the Maxim Integrated MAX98504 amplifier bindings to DT schema.
Few properties are made optional:
1. interrupts: current Linux driver implementation does not use them,
2. supplies: on some boards these might be wired to battery, for which
no regulator is provided.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/sound/max98504.txt | 44 ----------
.../bindings/sound/maxim,max98504.yaml | 86 +++++++++++++++++++
2 files changed, 86 insertions(+), 44 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/max98504.txt
create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98504.yaml

diff --git a/Documentation/devicetree/bindings/sound/max98504.txt b/Documentation/devicetree/bindings/sound/max98504.txt
deleted file mode 100644
index 583ed5fdfb28..000000000000
--- a/Documentation/devicetree/bindings/sound/max98504.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Maxim MAX98504 class D mono speaker amplifier
-
-This device supports I2C control interface and an IRQ output signal. It features
-a PCM and PDM digital audio interface (DAI) and a differential analog input.
-
-Required properties:
-
- - compatible : "maxim,max98504"
- - reg : should contain the I2C slave device address
- - DVDD-supply, DIOVDD-supply, PVDD-supply: power supplies for the device,
- as covered in ../regulator/regulator.txt
- - interrupts : should specify the interrupt line the device is connected to,
- as described in ../interrupt-controller/interrupts.txt
-
-Optional properties:
-
- - maxim,brownout-threshold - the PVDD brownout threshold, the value must be
- from 0, 1...21 range, corresponding to 2.6V, 2.65V...3.65V voltage range
- - maxim,brownout-attenuation - the brownout attenuation to the speaker gain
- applied during the "attack hold" and "timed hold" phase, the value must be
- from 0...6 (dB) range
- - maxim,brownout-attack-hold-ms - the brownout attack hold phase time in ms,
- 0...255 (VBATBROWN_ATTK_HOLD, register 0x0018)
- - maxim,brownout-timed-hold-ms - the brownout timed hold phase time in ms,
- 0...255 (VBATBROWN_TIME_HOLD, register 0x0019)
- - maxim,brownout-release-rate-ms - the brownout release phase step time in ms,
- 0...255 (VBATBROWN_RELEASE, register 0x001A)
-
-The default value when the above properties are not specified is 0,
-the maxim,brownout-threshold property must be specified to actually enable
-the PVDD brownout protection.
-
-Example:
-
- max98504@31 {
- compatible = "maxim,max98504";
- reg = <0x31>;
- interrupt-parent = <&gpio_bank_0>;
- interrupts = <2 0>;
-
- DVDD-supply = <&regulator>;
- DIOVDD-supply = <&regulator>;
- PVDD-supply = <&regulator>;
-};
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98504.yaml b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml
new file mode 100644
index 000000000000..23f19a9d2c06
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98504.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98504 class D mono speaker amplifier
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Maxim Integrated MAX98504 speaker amplifier supports I2C control interface
+ with an IRQ output signal, PCM and PDM digital audio interface (DAI) and a
+ differential analog input.
+
+properties:
+ compatible:
+ const: maxim,max98504
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ DIOVDD-supply: true
+ DVDD-supply: true
+ PVDD-supply: true
+
+ maxim,brownout-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 21
+ default: 0
+ description:
+ PVDD brownout threshold, where values correspond to 2.6V, 2.65V...3.65V
+ voltage range. Property also enables the PVDD brownout protection.
+
+ maxim,brownout-attenuation:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 6
+ default: 0
+ description:
+ Brownout attenuation to the speaker gain applied during the "attack hold"
+ and "timed hold" phase, the value must be from 0...6 (dB) range.
+
+ maxim,brownout-attack-hold-ms:
+ maximum: 255
+ default: 0
+ description:
+ Brownout attack hold phase time in ms, VBATBROWN_ATTK_HOLD, register 0x0018.
+
+ maxim,brownout-timed-hold-ms:
+ maximum: 255
+ default: 0
+ description:
+ Brownout timed hold phase time in ms, VBATBROWN_TIME_HOLD, register 0x0019.
+
+ maxim,brownout-release-rate-ms:
+ maximum: 255
+ default: 0
+ description:
+ Brownout release phase step time in ms, VBATBROWN_RELEASE, register 0x001A.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ amplifier@31 {
+ compatible = "maxim,max98504";
+ reg = <0x31>;
+
+ DIOVDD-supply = <&ldo3_reg>;
+ DVDD-supply = <&ldo3_reg>;
+ };
+ };
--
2.34.1
\
 
 \ /
  Last update: 2022-12-04 12:37    [W:0.025 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site