lkml.org 
[lkml]   [2022]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
Date
Convert the GPIO IR LED bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/leds/irled/gpio-ir-tx.txt | 14 --------
.../bindings/leds/irled/gpio-ir-tx.yaml | 36 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 37 insertions(+), 14 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
create mode 100644 Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml

diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
deleted file mode 100644
index cbe8dfd29715..000000000000
--- a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Device tree bindings for IR LED connected through gpio pin which is used as
-remote controller transmitter.
-
-Required properties:
- - compatible: should be "gpio-ir-tx".
- - gpios : Should specify the IR LED GPIO, see "gpios property" in
- Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs
- should be indicated using flags in the GPIO specifier.
-
-Example:
- irled@0 {
- compatible = "gpio-ir-tx";
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml
new file mode 100644
index 000000000000..5839d00c7089
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/gpio-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through GPIO pin
+
+maintainers:
+ - Sean Young <sean@mess.org>
+
+description:
+ IR LED connected through GPIO pin which is used as remote controller
+ transmitter.
+
+properties:
+ compatible:
+ const: gpio-ir-tx
+
+ gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ irled {
+ compatible = "gpio-ir-tx";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index be71999cea73..25b7fbf09e7b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8839,6 +8839,7 @@ GPIO IR Transmitter
M: Sean Young <sean@mess.org>
L: linux-media@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml
F: drivers/media/rc/gpio-ir-tx.c

GPIO MOCKUP DRIVER
--
2.34.1
\
 
 \ /
  Last update: 2022-12-04 11:43    [W:0.060 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site