lkml.org 
[lkml]   [2022]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM
Date
storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(),
which in a confidential VM allocates swiotlb bounce buffers. If the
I/O submission fails in storvsc_do_io(), the I/O is typically retried
by higher level code, but the bounce buffer memory is never freed.
The mostly like cause of I/O submission failure is a full VMBus
channel ring buffer, which is not uncommon under high I/O loads.
Eventually enough bounce buffer memory leaks that the confidential
VM can't do any I/O. The same problem can arise in a non-confidential
VM with kernel boot parameter swiotlb=force.

Fix this by doing scsi_dma_unmap() in the case of an I/O submission
error, which frees the bounce buffer memory.

Fixes: 743b237c3a7b ("scsi: storvsc: Add Isolation VM support for storvsc driver")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
---
drivers/scsi/storvsc_drv.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 3c5b7e4..55d6fb4 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1823,6 +1823,9 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
ret = storvsc_do_io(dev, cmd_request, get_cpu());
put_cpu();

+ if (ret)
+ scsi_dma_unmap(scmnd);
+
if (ret == -EAGAIN) {
/* no more space */
ret = SCSI_MLQUEUE_DEVICE_BUSY;
--
1.8.3.1
\
 
 \ /
  Last update: 2022-12-04 20:55    [W:0.051 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site