lkml.org 
[lkml]   [2022]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 02/12] dt-bindings: display: mediatek: add MT8195 hdmi bindings
Date
Hi, Guillaume:

On Fri, 2022-11-04 at 15:09 +0100, Guillaume Ranquet wrote:
> Add mt8195 SoC bindings for hdmi and hdmi-ddc
>
> On mt8195 the ddc i2c controller is part of the hdmi IP block and
> thus has no
> specific register range, power domain or interrupt, making it simpler
> than its the legacy "mediatek,hdmi-ddc" binding.
>
> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> ---
>

[snip]

> a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-
> hdmi-ddc.yaml
> b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-
> hdmi-ddc.yaml
> new file mode 100644
> index 000000000000..2dc273689584
> --- /dev/null
> +++
> b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-
> hdmi-ddc.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id:
> https://urldefense.com/v3/__http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml*__;Iw!!CTRNKA9wMg0ARbw!wwVQuq5lzW0lvUFUkVXPWT8cIu96xdkn4tMams1E55qyxEZmgV1i0WfpOlq57w$
>
> +$schema:
> https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!wwVQuq5lzW0lvUFUkVXPWT8cIu96xdkn4tMams1E55qyxEZmgV1i0WdSGOSxzw$
>
> +
> +title: Mediatek HDMI DDC for mt8195
> +
> +maintainers:
> + - CK Hu <ck.hu@mediatek.com>
> + - Jitao shi <jitao.shi@mediatek.com>
> +
> +description: |
> + The HDMI DDC i2c controller is used to interface with the HDMI DDC
> pins.
> +
> +properties:
> + compatible:
> + enum:
> + - mediatek,mt8195-hdmi-ddc
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: ddc
> +
> + mediatek,hdmi:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + A phandle to the mt8195 hdmi controller
> +
> +required:
> + - compatible
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + hdmiddc0: i2c {
> + compatible = "mediatek,mt8195-hdmi-ddc";
> + mediatek,hdmi = <&hdmi0>;
> + clocks = <&clk26m>;
> + clock-names = "ddc";
> + };

I think we should not have a virtual device. This ddc is part of
mt8195-hdmi device, so just keep mt8195-hdmi, and let mt8195-hdmi
driver to probe the sub driver of ddc driver.

Regards,
CK

> +
> +...
>
\
 
 \ /
  Last update: 2023-03-26 23:20    [W:0.164 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site