lkml.org 
[lkml]   [2022]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 12/14] sound: soc: qcom: qusb6: Ensure PCM format is supported by USB audio device
From
Date
Hello!

On 12/24/22 2:31 AM, Wesley Cheng wrote:

> Check for if the PCM format is supported during the hw_params callback. If
> the profile is not supported then the userspace ALSA entity will receive an
> error, and can take further action.
>
> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> ---
> sound/soc/qcom/qdsp6/q6usb.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
> index a9da6dec6c6f..128e0974db4e 100644
> --- a/sound/soc/qcom/qdsp6/q6usb.c
> +++ b/sound/soc/qcom/qdsp6/q6usb.c
> @@ -42,7 +42,14 @@ static int q6usb_hw_params(struct snd_pcm_substream *substream,
> struct snd_pcm_hw_params *params,
> struct snd_soc_dai *dai)
> {
> - return 0;
> + struct q6usb_port_data *data = dev_get_drvdata(dai->dev);
> + int direction = substream->stream;
> + int ret;

You don't seem to need this variable, just use *return*
snd_soc_usb_find_format(...).

> +
> + ret = snd_soc_usb_find_format(data->active_idx, params, direction);
> +
> + return ret;
> +
> }
> static const struct snd_soc_dai_ops q6usb_ops = {
> .hw_params = q6usb_hw_params,

MBR, Sergey

\
 
 \ /
  Last update: 2023-03-26 23:19    [W:0.439 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site