lkml.org 
[lkml]   [2022]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 4/9] media: verisilicon: Check AV1 bitstreams bit depth
From
Date
Le mardi 20 décembre 2022 à 14:02 +0100, Benjamin Gaignard a écrit :
> Le 19/12/2022 à 21:38, Nicolas Dufresne a écrit :
> > Le lundi 19 décembre 2022 à 16:56 +0100, Benjamin Gaignard a écrit :
> > > The driver supports 8 and 10 bits bitstreams, make sure to discard
> > > other cases.
> > >
> > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
> > > ---
> > > drivers/media/platform/verisilicon/hantro_drv.c | 6 ++++++
> > > 1 file changed, 6 insertions(+)
> > >
> > > diff --git a/drivers/media/platform/verisilicon/hantro_drv.c b/drivers/media/platform/verisilicon/hantro_drv.c
> > > index 8e93710dcfed..e10fc59634dd 100644
> > > --- a/drivers/media/platform/verisilicon/hantro_drv.c
> > > +++ b/drivers/media/platform/verisilicon/hantro_drv.c
> > > @@ -282,7 +282,13 @@ static int hantro_try_ctrl(struct v4l2_ctrl *ctrl)
> > > /* We only support profile 0 */
> > > if (dec_params->profile != 0)
> > > return -EINVAL;
> > > + } else if (ctrl->id == V4L2_CID_STATELESS_AV1_SEQUENCE) {
> > > + const struct v4l2_ctrl_av1_sequence *sequence = ctrl->p_new.p_av1_sequence;
> > > +
> > > + if (sequence->bit_depth != 8 && sequence->bit_depth != 10)
> > > + return -EINVAL;
> > As you state in the cover letter, should this just be this for now ?
>
> The driver can decode 8 or 10 bits bitstreams but will on produce 8bits (NV12_4L4 or NV12)
> frames. The hardware is able to truncate 10bits bitstreams to 8 bits output.

I tested that, and NV12 works, picking NV12_4L4 though leads to corrupted
buffers. I think the PP is not being activated. G2/VC8000 and likely VC9000 can
only produce tile reference in the original depth chosen (hence why it goes not
have a format register like G1 does).

As you are aware, the driver didn't pick NV12_10LE40_4L4 automatically, and
that's what broke fluster 10bit test in tiled mode for 10bit. I suspect in v2,
we'll have all this fixed and 10bit will be activated, so this comment will be
ignored.

>
> >
> >
> > > + if (sequence->bit_depth != 8)
> > > + return -EINVAL;
> >
> > > }
> > > +
> > > return 0;
> > > }
> > >

\
 
 \ /
  Last update: 2023-03-26 23:17    [W:0.099 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site