lkml.org 
[lkml]   [2022]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] New yaml file: tas2781
Date
Add DTS discription for tas2781 driver code

Signed-off-by: Kevin Lu <luminlong@139.com>
---
.../devicetree/bindings/sound/tas2781.yaml | 90 +++++++++++++++++++
1 file changed, 90 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/tas2781.yaml

diff --git a/Documentation/devicetree/bindings/sound/tas2781.yaml b/Documentation/devicetree/bindings/sound/tas2781.yaml
new file mode 100644
index 000000000..96fa45bf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas2781.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/tas2781.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments TAS2781 Smart PA
+
+maintainers:
+ - Shenghao Ding <shenghao-ding@ti.com>
+ - Kevin Lu <kevin-lu@ti.com>
+
+description: |
+ The TAS2781 is a mono, digital input Class-D audio amplifier
+ optimized for efficiently driving high peak power into small
+ loudspeakers. Integrated an on-chip DSP supports Texas Instruments
+ Smart Amp speaker protection algorithm. The integrated speaker
+ voltage and current sense provides for real time
+ monitoring of loudspeaker behavior.
+
+properties:
+ compatible:
+ enum:
+ - ti,tas2781
+ - ti,audev
+ description: |
+ ti,audev will disable the irq of tas2781.
+ reg:
+ maxItems: 1
+ description: |
+ I2C address of the device can be between 0x38 to 0x40.
+
+ reset-gpioN:
+ maxItems: 4
+ description: GPIO used to reset the device.
+
+ ti,topleft-channel:
+ maxItems: 1
+ description: I2C Address for each specific device.
+
+ ti,topright-channel:
+ maxItems: 1
+
+ ti,bottomleft-channel:
+ maxItems: 1
+
+ ti,bottomright-channel:
+ maxItems: 1
+
+ ti,global-address:
+ maxItems: 1
+ description: This item is not mandatory. if the device support gloabel mode, this item should be active.
+
+ ti,irq-gpio:
+ maxItems: 1
+ description: GPIO used to interrupt the device.
+
+ '#sound-dai-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec: codec@38 {
+ compatible = "ti,tas2781";
+ reg = <0x38>;
+ #sound-dai-cells = <1>;
+ ti,topleft-channel = <0x38>;
+ ti,topright-channel = <0x39>;
+ ti,bottomright-channel = <0x3a>;
+ ti,bottomright-channel = <0x3b>;
+ ti,global-address = <0x40>;
+ ti,reset-gpio0 = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ ti,reset-gpio1 = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ ti,reset-gpio2 = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ ti,reset-gpio3 = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ ti,irq-gpio = <&gpio1 15 0>;
+ };
+ };
+...
--
2.17.1

\
 
 \ /
  Last update: 2023-03-26 23:16    [W:0.038 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site