lkml.org 
[lkml]   [2022]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] Add support for the orisetech ota5601
Date
Changes since v2:
- Documented the registers to the best of my knowledge
- Used macros for on/off panel registers
- Added SPI id_table (non-requested change, fixes a warning in dmesg)

---
Changes since v1:
- fixed the dt-bindings maintainer email adress
- dropped backlight, port, power-supply and reset-gpios as they're
provided by panel-common.yaml as pointed by Krzysztof Kozlowski
- changed reg: true to reg : maxItems: 1

Christophe Branchereau (2):
drm/panel: add the orisetech ota5601a
dt-bindings: display/panel: Add the Focaltech gpt3

.../display/panel/focaltech,gpt3.yaml | 56 +++
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-orisetech-ota5601a.c | 364 ++++++++++++++++++
4 files changed, 430 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
create mode 100644 drivers/gpu/drm/panel/panel-orisetech-ota5601a.c

--
2.35.1

\
 
 \ /
  Last update: 2023-03-26 23:15    [W:0.061 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site