lkml.org 
[lkml]   [2022]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: TI: X15 the connected SSD is not detected on Linux next 20221006 tag
On Wed, 30 Nov 2022 at 11:03, Niklas Cassel <Niklas.Cassel@wdc.com> wrote:
>
> On Wed, Nov 30, 2022 at 03:10:37PM +0530, Naresh Kamboju wrote:
> > On Mon, 17 Oct 2022 at 21:22, Serge Semin <fancer.lancer@gmail.com> wrote:
> >
> > FYI,
> >
> > We have been noticing this problem [a] & [b] on Linux mainline master 6.1.0-rc7
> >
> > Test error: mkfs.ext4
> > /dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190702A00D84 failed; job
> > exit
> >
> > Please suggest a way forward on this reported issue on arm32 TI BeagleBoard X15
> > device. Build and Kernel configs details provided in the metadata section.
> >
> > metadata:
> > git_ref: master
> > git_repo: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline
> > git_sha: b7b275e60bcd5f89771e865a8239325f86d9927d
> > git_describe: v6.1-rc7
> > kernel_version: 6.1.0-rc7
> > kernel-config: https://builds.tuxbuild.com/2I9I42JhhQqS9GOpFppfRiuqtRW/config
> > build-url: https://gitlab.com/Linaro/lkft/mirrors/torvalds/linux-mainline/-/pipelines/706371149
> > artifact-location: https://builds.tuxbuild.com/2I9I42JhhQqS9GOpFppfRiuqtRW
> > toolchain: gcc-10
> >
> > [a] https://lkft.validation.linaro.org/scheduler/job/5892099
> > [b] https://lore.kernel.org/all/20221017155246.zxal2cfehjgaajcu@mobilestation/
> >
> > - Naresh
>
> Hello Naresh,
>
>
> Looking at the error from the log:
>
> + mkfs.ext4 /dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190702A00D84
> mke2fs 1.46.5 (30-Dec-2021)
> The file /dev/disk/by-id/ata-SanDisk_SSD_PLUS_120GB_190702A00D84 does not exist and no size was specified.
>
> It seems like the device that you are trying to format does not exist.
>
>
>
> On October 17th Serge suggested that you guys should try to enable:
> CONFIG_AHCI_DWC
> and see if that does solve your problem.
>
> There was never any reply to his suggestion.

I re-tested this on todays linux tree v6.1-rc7-103-gef4d3ea40565.

With CONFIG_AHCI_DWC=y the kernel fell on its back and no output was produced
So changing the ahci_dwc_init to be a late_initcall [1] made me see
what was going on [2].

The kernel booted fine with CONFIG_AHCI_DWC=y + this patch [3]

--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -109,7 +109,8 @@ struct clk *ahci_platform_find_clk(struct
ahci_host_priv *hpriv, const char *con
int i;

for (i = 0; i < hpriv->n_clks; i++) {
- if (!strcmp(hpriv->clks[i].id, con_id))
+ if (hpriv->clks && hpriv->clks[i].id &&
+ !strcmp(hpriv->clks[i].id, con_id))
return hpriv->clks[i].clk;
}

Bootlog [4].
Thank you Arnd for helping out with the investigation and for
proposing the patch for me to test.
>
>
>
> Looking at the config in:
> > kernel-config: https://builds.tuxbuild.com/2I9I42JhhQqS9GOpFppfRiuqtRW/config
>
> # CONFIG_AHCI_DWC is not set
>
> This Kconfig is indeed not enabled.
>
> Could you guys please try the suggestion from Serge?

The patch was also tested [5] without enabling CONFIG_AHCI_DWC, this
also worked fine.

Cheers,
Anders
[1] http://ix.io/4hmt
[2] https://lkft.validation.linaro.org/scheduler/job/5902935
[3] http://ix.io/4hmv
[4] https://lkft.validation.linaro.org/scheduler/job/5903220
[5] http://ix.io/4hmw

\
 
 \ /
  Last update: 2022-12-01 12:49    [W:0.087 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site