lkml.org 
[lkml]   [2022]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] leds: add driver for SPI driven WorldSemi WS2812B RGB LEDs
Date
This patch adds support for driving a chain of WS2812B LED chips
using SPI bus.

WorldSemi WS2812B is a individually addressable LED chip that
can be chained together and controlled individually using a
single wire. The chip recognize a long pulse as a bit of 1 and
a short pulse as a bit of 0. Host sends a continuous stream
of 24-bits color values, each LED chip takes the first 3 byte
it receives as its color value and passes the leftover bytes to
the next LED on the chain.

This driver simulates this protocol using SPI bus by sending
a long pulse as 3'b110 and a short pulse as 3'b100. The SPI
frequency needs to be 2.105MHz~2.85MHz for the timing to be
correct and the controller needs to transfer all the bytes
continuously.

Changes since v1:
various dt binding fixes
add support for default-brightness

Chuanhong Guo (3):
dt-bindings: vendor-prefixes: add an entry for WorldSemi
dt-bindings: leds: add dt schema for worldsemi,ws2812b-spi
leds: add driver for SPI driven WorldSemi WS2812B RGB LEDs

.../bindings/leds/worldsemi,ws2812b.yaml | 138 ++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
drivers/leds/rgb/Kconfig | 11 +
drivers/leds/rgb/Makefile | 1 +
drivers/leds/rgb/leds-ws2812b.c | 235 ++++++++++++++++++
5 files changed, 387 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml
create mode 100644 drivers/leds/rgb/leds-ws2812b.c

--
2.38.1

\
 
 \ /
  Last update: 2022-12-02 04:44    [W:0.077 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site