lkml.org 
[lkml]   [2022]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCHv1 3/8] ARM: dts: at91: sam9x60: Add flexcom definitions
From
On 31/10/2022 at 04:36, Durai Manickam KR wrote:
> Add the flexcom definitions to the SoC specifc DTSI file.
>
> Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
> Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com>
> Signed-off-by: Manikandan M <manikandan.m@microchip.com>
> ---
> arch/arm/boot/dts/sam9x60.dtsi | 52 ++++++++++++++++++++++++++++++++--
> 1 file changed, 50 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
> index ef07d281a3db..fd4f5d43f7bb 100644
> --- a/arch/arm/boot/dts/sam9x60.dtsi
> +++ b/arch/arm/boot/dts/sam9x60.dtsi

[..]

> @@ -180,6 +190,26 @@ flx5: flexcom@f0004000 {
> #size-cells = <1>;
> ranges = <0x0 0xf0004000 0x800>;
> status = "disabled";
> +
> + uart5: serial@200 {
> + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(10))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(11))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;

Isn't "atmel,fifo-size = <16>;" missing in this added definition?

> + status = "disabled";
> + };
> };
>
> dma0: dma-controller@f0008000 {

[..]

Regards,
Nicolas

--
Nicolas Ferre

\
 
 \ /
  Last update: 2022-11-08 14:38    [W:0.036 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site