lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] tpm: Add flag to use default cancellation policy
Date
The check for cancelled request depends on the VID of the chip, but
some chips share VID which shouldn't share their cancellation
behavior. This is the case for the Nuvoton NPCT75X, which should use
the default cancellation check, not the Winbond one.
To avoid changing the existing behavior, add a new flag to indicate
that the chip should use the default cancellation check and set it
for the I2C TPM2 TIS driver.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v1:
- Update switch statement with default: break;

drivers/char/tpm/tpm_tis_core.c | 20 ++++++++++++--------
drivers/char/tpm/tpm_tis_core.h | 1 +
drivers/char/tpm/tpm_tis_i2c.c | 1 +
3 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 757623bacfd5..3f98e587b3e8 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -682,15 +682,19 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);

- switch (priv->manufacturer_id) {
- case TPM_VID_WINBOND:
- return ((status == TPM_STS_VALID) ||
- (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY)));
- case TPM_VID_STM:
- return (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY));
- default:
- return (status == TPM_STS_COMMAND_READY);
+ if (!test_bit(TPM_TIS_DEFAULT_CANCELLATION, &priv->flags)) {
+ switch (priv->manufacturer_id) {
+ case TPM_VID_WINBOND:
+ return ((status == TPM_STS_VALID) ||
+ (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY)));
+ case TPM_VID_STM:
+ return (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY));
+ default:
+ break;
+ }
}
+
+ return status == TPM_STS_COMMAND_READY;
}

static irqreturn_t tis_int_handler(int dummy, void *dev_id)
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index 66a5a13cd1df..b68479e0de10 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -86,6 +86,7 @@ enum tis_defaults {
enum tpm_tis_flags {
TPM_TIS_ITPM_WORKAROUND = BIT(0),
TPM_TIS_INVALID_STATUS = BIT(1),
+ TPM_TIS_DEFAULT_CANCELLATION = BIT(2),
};

struct tpm_tis_data {
diff --git a/drivers/char/tpm/tpm_tis_i2c.c b/drivers/char/tpm/tpm_tis_i2c.c
index 45f388127f4b..91451ee1ef8d 100644
--- a/drivers/char/tpm/tpm_tis_i2c.c
+++ b/drivers/char/tpm/tpm_tis_i2c.c
@@ -329,6 +329,7 @@ static int tpm_tis_i2c_probe(struct i2c_client *dev,
if (!phy->io_buf)
return -ENOMEM;

+ set_bit(TPM_TIS_DEFAULT_CANCELLATION, &phy->priv.flags);
phy->i2c_client = dev;

/* must precede all communication with the tpm */
--
2.31.1
\
 
 \ /
  Last update: 2022-11-07 18:15    [W:0.078 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site