lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/7] dt-bindings: clock: renesas,r9a06g032-sysctrl: Add h2mode property
Date
Add the h2mode property to force the USBs mode ie:
- 2 hosts
or
- 1 host and 1 device

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
.../bindings/clock/renesas,r9a06g032-sysctrl.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
index 95bf485c6cec..f9e0a58aa4fb 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -39,6 +39,16 @@ properties:
'#power-domain-cells':
const: 0

+ renesas,h2mode:
+ description: |
+ Configure the USBs mode.
+ - <0> : the USBs are in 1 host and 1 device mode.
+ - <1> : the USBs are in 2 host mode.
+ If the property is not present, the value used is the one already present
+ in the CFG_USB register (from reset or set by the bootloader).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
'#address-cells':
const: 1

--
2.37.3
\
 
 \ /
  Last update: 2022-11-07 15:01    [W:0.178 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site