lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property
Date
According to latest errata of J721e [1], HS400 mode is not supported
in MMCSD0 subsystem (i2024) . Speed modes supported has been already
updated in PATCH eb8f6194e807. 'ti,strobe-sel' property is only
required by HS400 speed mode and thus needs to be removed from kernel
dtsi for J721e soc.

'ti,strobe-sel' is read in sdhci_am654.c line 733 and gets stored in
sdhci_am654->strb_sel. This sdhci_am654->strb_sel is used at only one
place in sdhci_am654.c line 291 which will only get used if HS400
is enabled.

Thus, drop 'ti,strobe-sel' property from kernel dtsi for J721e soc.

[.] https://www.ti.com/lit/er/sprz455/sprz455.pdf

Fixes: eb8f6194e807 ("arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 917c9dc99efa..e4748a838d83 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1094,7 +1094,6 @@
ti,itap-del-sel-mmc-hs = <0xa>;
ti,itap-del-sel-ddr52 = <0x3>;
ti,trm-icp = <0x8>;
- ti,strobe-sel = <0x77>;
dma-coherent;
};

--
2.20.1
\
 
 \ /
  Last update: 2022-11-07 12:23    [W:0.041 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site