lkml.org 
[lkml]   [2022]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC v1] hack: suspend: usb: option: add reset_resume callback
Date
Currently to be the same as resume(). This will just avoid re-enumeration
of the modem device on every system resume.

This exists only because the usb core will re-enumerate *any* device
whos' driver doesn't have reset_resume() implemented. A call trace:

Jun 23 11:15:43 pureos kernel: usb_serial_disconnect+0x58/0x180 [usbserial]
Jun 23 11:15:43 pureos kernel: usb_unbind_interface+0x84/0x290 [usbcore]
Jun 23 11:15:43 pureos kernel: device_remove+0x78/0x90
Jun 23 11:15:43 pureos kernel: device_release_driver_internal+0x1e4/0x250
Jun 23 11:15:43 pureos kernel: device_release_driver+0x24/0x30
Jun 23 11:15:43 pureos kernel: usb_forced_unbind_intf+0xac/0xd4 [usbcore]
Jun 23 11:15:43 pureos kernel: unbind_marked_interfaces.isra.0+0x5c/0x80 [usbcore]
Jun 23 11:15:43 pureos kernel: usb_resume+0x78/0x8c [usbcore]
Jun 23 11:15:43 pureos kernel: usb_dev_resume+0x20/0x30 [usbcore]
Jun 23 11:15:43 pureos kernel: dpm_run_callback+0x60/0x1f0
Jun 23 11:15:43 pureos kernel: device_resume+0x9c/0x1f4

where usb_resume_inteface() sets needs_binding here
https://elixir.bootlin.com/linux/latest/source/drivers/usb/core/driver.c#L1353
because of no reset_resume() implementation.

This hack is even suggested in some modems' application notes as can
be found in discussion here
https://invent.kde.org/teams/plasma-mobile/issues/-/issues/3#note_218386

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
drivers/usb/serial/option.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index dee79c7d82d5..58526bf8684d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -46,6 +46,7 @@ static int option_probe(struct usb_serial *serial,
static int option_attach(struct usb_serial *serial);
static void option_release(struct usb_serial *serial);
static void option_instat_callback(struct urb *urb);
+static int option_reset_resume(struct usb_serial *serial);

/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
@@ -2227,6 +2228,7 @@ static struct usb_serial_driver option_1port_device = {
#ifdef CONFIG_PM
.suspend = usb_wwan_suspend,
.resume = usb_wwan_resume,
+ .reset_resume = option_reset_resume,
#endif
};

@@ -2373,6 +2375,18 @@ static void option_instat_callback(struct urb *urb)
}
}

+static int option_reset_resume(struct usb_serial *serial)
+{
+ /*
+ * We simply call resume() because this implementation only
+ * exists because the USB core will un- and rebind any driver
+ * during system resume that does *not* have a reset_resume()
+ * implementation; see usb_resume_interface() in core/driver.c
+ * We want to avoid that unconditional removal/addition.
+ */
+ return usb_wwan_resume(serial);
+}
+
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL v2");
--
2.30.2
\
 
 \ /
  Last update: 2022-11-30 13:17    [W:0.201 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site