Messages in this thread Patch in this message | | | From | Cosmin Tanislav <> | Subject | [PATCH v4 06/13] dt-bindings: iio: temperature: ltc2983: require custom sensor tables | Date | Thu, 3 Nov 2022 15:00:34 +0200 |
| |
From: Cosmin Tanislav <cosmin.tanislav@analog.com>
The driver will error out when a custom sensor type is used but a custom sensor table is not provided. Require it in the binding too.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> --- .../bindings/iio/temperature/adi,ltc2983.yaml | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 4f26b337c957..bbac5f5cfbb3 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -130,6 +130,15 @@ patternProperties: - description: Voltage point in nV, signed. - description: Temperature point in uK. + allOf: + - if: + properties: + adi,sensor-type: + const: 9 + then: + required: + - adi,custom-thermocouple + "^diode@": type: object description: @@ -263,6 +272,15 @@ patternProperties: dependencies: adi,current-rotate: [ "adi,rsense-share" ] + allOf: + - if: + properties: + adi,sensor-type: + const: 18 + then: + required: + - adi,custom-rtd + "^thermistor@": type: object description: @@ -349,6 +367,22 @@ patternProperties: dependencies: adi,current-rotate: [ "adi,rsense-share" ] + allOf: + - if: + properties: + adi,sensor-type: + const: 26 + then: + required: + - adi,custom-steinhart + - if: + properties: + adi,sensor-type: + const: 27 + then: + required: + - adi,custom-thermistor + "^adc@": type: object description: Represents a channel which is being used as a direct adc. -- 2.38.1
| |