lkml.org 
[lkml]   [2022]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v4 00/13] Support more parts in LTC2983
    On Sun, 6 Nov 2022 17:14:58 +0000
    Jonathan Cameron <jic23@kernel.org> wrote:

    > On Thu, 3 Nov 2022 15:00:28 +0200
    > Cosmin Tanislav <demonsingur@gmail.com> wrote:
    >
    > > Add support for the following parts:
    > > * LTC2984
    > > * LTC2986
    > > * LTM2985
    > >
    > > The LTC2984 is a variant of the LTC2983 with EEPROM.
    > > The LTC2986 is a variant of the LTC2983 with only 10 channels,
    > > EEPROM and support for active analog temperature sensors.
    > > The LTM2985 is software-compatible with the LTC2986.
    > >
    > > Also, make bulk write buffer DMA-safe.
    > > Besides that, refine the binding.
    > Replying at least partly so I can see I already looked at this...
    >
    > Looks good to me. Will pick up once DT bindings maintainers are
    > happy.

    Series applied to the togreg branch of iio.git and initially pushed out
    as testing. I tweaked patch 11 as requested whilst applying.

    Thanks,

    Jonathan
    >
    > Thanks,
    >
    > Jonathan
    >
    > >
    > > V1 -> V2:
    > > * add Fixes tag
    > > * add patch that fixes the regmap_bulk_write() call with stack allocated
    > > buffer
    > > * add patch that refines the binding in preperation for adding new
    > > parts support to it
    > > * do not use stack allocated buffer for writing the EEPROM key
    > >
    > > V2 -> V3:
    > > * drop minItems if equal to maxItems
    > > * drop adi,single-ended conditions because of recent dtschema
    > > restrictions (even though they're valid in jsonschema and the last
    > > dtschema tag)
    > > * drop "allocate iio channels once" patch since it's been picked as a fix
    > >
    > > V3 -> V4:
    > > * add pipe for 'adi,mux-delay-config-us' description
    > > * add pipe for 'adi,rtd-curve' description
    > > * keep newlines after descriptions
    > > * move 'adi,current-rotate' to conditional
    > > * put 'adi,custom-steinhart' in the original place
    > > * keep 'minItems' for 'adi,custom-steinhart'
    > > * override 'enum' to forbid auto-range in 'adi,excitation-current-nanoamp'
    > > when using custom thermistors
    > > * split refine patch into multiple patches
    > > - use generic node name in example
    > > - describe broken mux delay property
    > > - refine descriptions
    > > - change default excitation for custom thermistors
    > > - require 4 wire rtd for current rotate
    > > - require custom sensor tables
    > > - describe matrix items
    > > - remove qutations from phandle ref
    > > - use hex for sensor address
    > > - add default values
    > >
    > > Cosmin Tanislav (13):
    > > iio: temperature: ltc2983: make bulk write buffer DMA-safe
    > > dt-bindings: iio: temperature: ltc2983: add default values
    > > dt-bindings: iio: temperature: ltc2983: use hex for sensor address
    > > dt-bindings: iio: temperature: ltc2983: remove qutations from phandle
    > > ref
    > > dt-bindings: iio: temperature: ltc2983: describe matrix items
    > > dt-bindings: iio: temperature: ltc2983: require custom sensor tables
    > > dt-bindings: iio: temperature: ltc2983: require 4 wire rtd for current
    > > rotate
    > > dt-bindings: iio: temperature: ltc2983: change default excitation for
    > > custom thermistors
    > > dt-bindings: iio: temperature: ltc2983: refine descriptions
    > > dt-bindings: iio: temperature: ltc2983: describe broken mux delay
    > > property
    > > dt-bindings: iio: temperature: ltc2983: use generic node name in
    > > example
    > > dt-bindings: iio: temperature: ltc2983: support more parts
    > > iio: temperature: ltc2983: support more parts
    > >
    > > .../bindings/iio/temperature/adi,ltc2983.yaml | 335 +++++++++++-------
    > > drivers/iio/temperature/ltc2983.c | 193 +++++++++-
    > > 2 files changed, 389 insertions(+), 139 deletions(-)
    > >
    >

    \
     
     \ /
      Last update: 2022-11-12 16:35    [W:4.150 / U:0.040 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site