lkml.org 
[lkml]   [2022]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] HID: mcp2221: don't connect hidraw
Date
The MCP2221 driver should not connect to the hidraw userspace interface,
as it needs exclusive access to the chip.

If you want to use /dev/hidrawX with the MCP2221, you need to avoid
binding this driver to the device and use the hid generic driver instead
(e.g. using udev rules).

Signed-off-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
---
drivers/hid/hid-mcp2221.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/hid-mcp2221.c b/drivers/hid/hid-mcp2221.c
index 5886543b17f3..e61dd039354b 100644
--- a/drivers/hid/hid-mcp2221.c
+++ b/drivers/hid/hid-mcp2221.c
@@ -1110,12 +1110,19 @@ static int mcp2221_probe(struct hid_device *hdev,
return ret;
}

- ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ /*
+ * This driver uses the .raw_event callback and therefore does not need any
+ * HID_CONNECT_xxx flags.
+ */
+ ret = hid_hw_start(hdev, 0);
if (ret) {
hid_err(hdev, "can't start hardware\n");
return ret;
}

+ hid_info(hdev, "USB HID v%x.%02x Device [%s] on %s\n", hdev->version >> 8,
+ hdev->version & 0xff, hdev->name, hdev->phys);
+
ret = hid_hw_open(hdev);
if (ret) {
hid_err(hdev, "can't open device\n");
@@ -1145,8 +1152,7 @@ static int mcp2221_probe(struct hid_device *hdev,
mcp->adapter.retries = 1;
mcp->adapter.dev.parent = &hdev->dev;
snprintf(mcp->adapter.name, sizeof(mcp->adapter.name),
- "MCP2221 usb-i2c bridge on hidraw%d",
- ((struct hidraw *)hdev->hidraw)->minor);
+ "MCP2221 usb-i2c bridge");

ret = devm_i2c_add_adapter(&hdev->dev, &mcp->adapter);
if (ret) {
--
2.34.1
\
 
 \ /
  Last update: 2022-11-03 23:28    [W:0.055 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site