lkml.org 
[lkml]   [2022]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/9] gpio: 104-dio-48e: Migrate to the regmap-irq API
On Sun, Nov 27, 2022 at 07:31:48PM +0100, Michael Walle wrote:
> Hi,
>
> [sorry this mail was just delivered now, although it seems
> to be sent last Tuesday.]

Actually I just sent it today, but you're right that it seems to have a
date of last Tuesday, so I must have configured something wrong on my
end before I sent it (sorry).

>
> Am 2022-11-22 11:29, schrieb William Breathitt Gray:
> > On Wed, Nov 23, 2022 at 05:01:53PM +0200, Andy Shevchenko wrote:
> > > On Tue, Nov 22, 2022 at 02:11:00AM -0500, William Breathitt Gray
> > > wrote:
> > > > + /* Initialize device interrupt state */
> > > > + err = regmap_read(map, DIO48E_DISABLE_INTERRUPT, &val);
> > > > + if (err)
> > > > + return err;
> > >
> > > Use ->init_hw() callback for this.
> >
> > In a subsequent patch 7/9 we remove direct gpio_chip registration in
> > favor of the i8255 library registration via gpio_regmap. It doesn't look
> > like gpio_regmap_register() sets the init_hw() callback.
> >
> > Michael, do you see any issues if I introduce init_hw() to
> > gpio_regmap_config? Or do you think this IRQ initialization belongs
> > somewhere else?
>
> Something like the following?
> gpiochip->init_hw = config.irq_init_hw;
>
> gpiochip doesn't seem to be the correct place, gpiochip_add_irqchip()
> is a noop for gpio-regmap, right? So using gpiochip_irqchip_init_hw()
> seems wrong.
>
> Maybe make gpio-regmap call it on its own? But really we just connect
> the regmap-irq to the gpiochip irqdomain.

I think you're right, it feels strange to handle IRQ initialization via
the GPIO framework. Maybe somewhere in regmap_irq might be more
appropriate?

> What is the purpose of the
> .init_hw callback? I've looked at other drivers which use regmap-irq
> and they all seem to just initialize the hardware in their _probe().
>
> -michael

I'm not opposed to initializing the hardware in _probe(), although I can
see merit in pushing that operation instead closer to the framework
where the initialization is actually relevant.

Andy, maybe you can shed some light about .init_hw; I think you
introduced it to gpiolib in commit 9411e3aaa6342.

William Breathitt Gray
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-11-27 23:01    [W:1.320 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site