lkml.org 
[lkml]   [2022]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] drm/tiny: panel-mipi-dbi: Support separate I/O voltage supply
Date
As stated in Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yml,
the MIPI DBI specification defines two power supplies, one for powering
the panel and one for the I/O voltage. The panel-mipi-dbi driver
currently only supports specifying a single "power-supply" in the
device tree.

Add support for a second power supply defined in a new "io-supply"
device tree property to make the driver properly configure the voltage
regulators on platforms where separate supplies are used.

(Resent from a new email address with proper formatting)

Otto Pflüger (4):
drm/mipi-dbi: Support separate I/O regulator
drm/tiny: panel-mipi-dbi: Read I/O supply from DT
dt-bindings: display: panel: mipi-dbi-spi: Add missing power-supply
dt-bindings: display: panel: mipi-dbi-spi: Add io-supply

.../bindings/display/panel/panel-mipi-dbi-spi.yaml | 11 ++++++++++-
drivers/gpu/drm/drm_mipi_dbi.c | 14 ++++++++++++++
drivers/gpu/drm/tiny/panel-mipi-dbi.c | 5 +++++
include/drm/drm_mipi_dbi.h | 7 ++++++-
4 files changed, 35 insertions(+), 2 deletions(-)

--
2.30.2

\
 
 \ /
  Last update: 2022-11-27 20:06    [W:0.871 / U:3.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site