lkml.org 
[lkml]   [2022]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 00/14] staging: vc04_services: bcm2835-isp support
From
Hi Umang,

Am 26.11.22 um 17:26 schrieb Umang Jain:
> Hi Stefan
>
> On 11/26/22 8:12 PM, Stefan Wahren wrote:
>> Hi Umang,
>>
>> Am 21.11.22 um 22:47 schrieb Umang Jain:
>>> This series aims to upport bcm2835-isp from the RPi kernel [1] and is a
>>> independent subset of earlier series [2] posted to upport CSI-2/CCP2
>>> receiver IP core("Unicam) + the ISP driver found in BCM283x and
>>> compatible
>>> SoCs (namely BCM2711). Unicam is still under active development to work
>>> with multistream support to get into mainline. Hence only the ISP
>>> driver
>>> will remain the primary area of this series.
>>
>> thanks for working on this. But honestly i would prefer that vchiq
>> comes out of staging before adding more features. As Greg said some
>> time ago staging is not a place to "dump code and run away". These
>> new files are in the same bad shape as the rest of vc04 before the
>> clean-up here in staging started.
>
> Certainly, I am not here to do that - but I am still learning the ropes.
no problem.
>
> If the staging issue is becoming a blocker for bcm2835-isp going
> upstream, I would be happy to help here! Though I must mention that I
> still have limited visibility so my aim would be to chart out a plan
> of things needed to be done to get vc04_services out of staging!

The vchiq driver is in staging since 2016, so every step forwards is
good. Unfortunately all of the low hanging fruits has been gathered.

For me the most important, but not to tricky steps to get vchiq out of
staging would be:

* Cleanup logging mechanism

* Get rid of custom function return values

There was already an attempt for this [1]

* Get rid of all non essential global structures and create a proper per
device structure

>
>>
>> I agree that VCSM is on the TODO list for vchiq, but this driver is
>> not necessary for making bcm2835-audio & bcm2835-camera leave
>> staging. It just binds more resources on a new feature.
>
> I see two TODO files in vc04_services:
>     ./bcm2835-camera/TODO
>     ./interface/TODO
>
> One of the bcm2835-camera TODO points to the vc-sm-cma driver itself.
> So that's address in the series. The other remaining one - I will need
> to take a deeper look before commenting on it.
>
> The main chunk of TODO are in vc04_services/interfaces/TODO. Doing a
> cursory reading of them suggests that these apply to *all*
> vc04_services components? Am I right?
Actually these applies just for the interfaces directory. Some of them
could apply to the services, but this is no priority.
>
> Are these are the specific bits of cleanup you are referring to in
> your comment?

You mean about bcm2835-isp? There were too many changes to vchiq that i
don't remember them all. The first that come to my mind was those fancy
comment sections which is not kernel coding style. It has been removed.

[1] -
https://lore.kernel.org/linux-staging/20220712181928.17547-1-jslebodn@redhat.com/

>
>
>>
>> Unfortuntately i hadn't much time to work on vchiq by myself.
>>
>> Just my two cents
>> Stefan
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2022-11-26 23:58    [W:0.427 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site