lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: keystone: align LED node names with dtschema
Date
The node names should be generic and DT schema expects certain pattern:

keystone-k2hk-evm.dtb: leds: 'debug1_1', 'debug1_2', 'debug2', 'debug3' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/keystone-k2hk-evm.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 4a91f5ded402..4352397b4f52 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -28,22 +28,22 @@ dsp_common_memory: dsp-common-memory@81f800000 {

leds {
compatible = "gpio-leds";
- debug1_1 {
+ led-debug-1-1 {
label = "keystone:green:debug1";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
};

- debug1_2 {
+ led-debug-1-2 {
label = "keystone:red:debug1";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
};

- debug2 {
+ led-debug-2 {
label = "keystone:blue:debug2";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
};

- debug3 {
+ led-debug-3 {
label = "keystone:blue:debug3";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
};
--
2.34.1
\
 
 \ /
  Last update: 2022-11-25 15:42    [W:0.228 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site