lkml.org 
[lkml]   [2022]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 1/2] selftests: bonding: up/down delay w/ slave link flapping
Date
Verify when a bond is configured with {up,down}delay and the link state
of slave members flaps if there are no remaining members up the bond
should immediately select a member to bring up. (from bonding.txt
section 13.1 paragraph 4)

Suggested-by: Liang Li <liali@redhat.com>
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
---

Notes:
v2:
* reduced the number of icmp echos to two (-c 2) and removed the
unneeded `return 0` from function `test_bond_recovery`.

.../selftests/drivers/net/bonding/Makefile | 4 +-
.../selftests/drivers/net/bonding/lag_lib.sh | 106 ++++++++++++++++++
.../net/bonding/mode-1-recovery-updelay.sh | 45 ++++++++
.../net/bonding/mode-2-recovery-updelay.sh | 45 ++++++++
.../selftests/drivers/net/bonding/settings | 2 +-
5 files changed, 200 insertions(+), 2 deletions(-)
create mode 100755 tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh
create mode 100755 tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh

diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile
index 6b8d2e2f23c2..0f3921908b07 100644
--- a/tools/testing/selftests/drivers/net/bonding/Makefile
+++ b/tools/testing/selftests/drivers/net/bonding/Makefile
@@ -5,7 +5,9 @@ TEST_PROGS := \
bond-arp-interval-causes-panic.sh \
bond-break-lacpdu-tx.sh \
bond-lladdr-target.sh \
- dev_addr_lists.sh
+ dev_addr_lists.sh \
+ mode-1-recovery-updelay.sh \
+ mode-2-recovery-updelay.sh

TEST_FILES := \
lag_lib.sh \
diff --git a/tools/testing/selftests/drivers/net/bonding/lag_lib.sh b/tools/testing/selftests/drivers/net/bonding/lag_lib.sh
index 16c7fb858ac1..2a268b17b61f 100644
--- a/tools/testing/selftests/drivers/net/bonding/lag_lib.sh
+++ b/tools/testing/selftests/drivers/net/bonding/lag_lib.sh
@@ -1,6 +1,8 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0

+NAMESPACES=""
+
# Test that a link aggregation device (bonding, team) removes the hardware
# addresses that it adds on its underlying devices.
test_LAG_cleanup()
@@ -59,3 +61,107 @@ test_LAG_cleanup()

log_test "$driver cleanup mode $mode"
}
+
+# Build a generic 2 node net namespace with 2 connections
+# between the namespaces
+#
+# +-----------+ +-----------+
+# | node1 | | node2 |
+# | | | |
+# | | | |
+# | eth0 +-------+ eth0 |
+# | | | |
+# | eth1 +-------+ eth1 |
+# | | | |
+# +-----------+ +-----------+
+lag_setup2x2()
+{
+ local state=${1:-down}
+ local namespaces="lag_node1 lag_node2"
+
+ # create namespaces
+ for n in ${namespaces}; do
+ ip netns add ${n}
+ done
+
+ # wire up namespaces
+ ip link add name lag1 type veth peer name lag1-end
+ ip link set dev lag1 netns lag_node1 $state name eth0
+ ip link set dev lag1-end netns lag_node2 $state name eth0
+
+ ip link add name lag1 type veth peer name lag1-end
+ ip link set dev lag1 netns lag_node1 $state name eth1
+ ip link set dev lag1-end netns lag_node2 $state name eth1
+
+ NAMESPACES="${namespaces}"
+}
+
+# cleanup all lag related namespaces and remove the bonding module
+lag_cleanup()
+{
+ for n in ${NAMESPACES}; do
+ ip netns delete ${n} >/dev/null 2>&1 || true
+ done
+ modprobe -r bonding
+}
+
+SWITCH="lag_node1"
+CLIENT="lag_node2"
+CLIENTIP="172.20.2.1"
+SWITCHIP="172.20.2.2"
+
+lag_setup_network()
+{
+ lag_setup2x2 "down"
+
+ # create switch
+ ip netns exec ${SWITCH} ip link add br0 up type bridge
+ ip netns exec ${SWITCH} ip link set eth0 master br0 up
+ ip netns exec ${SWITCH} ip link set eth1 master br0 up
+ ip netns exec ${SWITCH} ip addr add ${SWITCHIP}/24 dev br0
+}
+
+lag_reset_network()
+{
+ ip netns exec ${CLIENT} ip link del bond0
+ ip netns exec ${SWITCH} ip link set eth0 up
+ ip netns exec ${SWITCH} ip link set eth1 up
+}
+
+create_bond()
+{
+ # create client
+ ip netns exec ${CLIENT} ip link set eth0 down
+ ip netns exec ${CLIENT} ip link set eth1 down
+
+ ip netns exec ${CLIENT} ip link add bond0 type bond $@
+ ip netns exec ${CLIENT} ip link set eth0 master bond0
+ ip netns exec ${CLIENT} ip link set eth1 master bond0
+ ip netns exec ${CLIENT} ip link set bond0 up
+ ip netns exec ${CLIENT} ip addr add ${CLIENTIP}/24 dev bond0
+}
+
+test_bond_recovery()
+{
+ RET=0
+
+ create_bond $@
+
+ # verify connectivity
+ ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1
+ check_err $? "No connectivity"
+
+ # force the links of the bond down
+ ip netns exec ${SWITCH} ip link set eth0 down
+ sleep 2
+ ip netns exec ${SWITCH} ip link set eth0 up
+ ip netns exec ${SWITCH} ip link set eth1 down
+
+ # re-verify connectivity
+ ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1
+
+ local rc=$?
+ check_err $rc "Bond failed to recover"
+ log_test "$1 ($2) bond recovery"
+ lag_reset_network
+}
diff --git a/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh b/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh
new file mode 100755
index 000000000000..ad4c845a4ac7
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+# When the bond is configured with down/updelay and the link state of
+# slave members flaps if there are no remaining members up the bond
+# should immediately select a member to bring up. (from bonding.txt
+# section 13.1 paragraph 4)
+#
+# +-------------+ +-----------+
+# | client | | switch |
+# | | | |
+# | +--------| link1 |-----+ |
+# | | +-------+ | |
+# | | | | | |
+# | | +-------+ | |
+# | | bond | link2 | Br0 | |
+# +-------------+ +-----------+
+# 172.20.2.1 172.20.2.2
+
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+source "$lib_dir"/lag_lib.sh
+
+cleanup()
+{
+ lag_cleanup
+}
+
+trap cleanup 0 1 2
+
+lag_setup_network
+test_bond_recovery mode 1 miimon 100 updelay 0
+test_bond_recovery mode 1 miimon 100 updelay 200
+test_bond_recovery mode 1 miimon 100 updelay 500
+test_bond_recovery mode 1 miimon 100 updelay 1000
+test_bond_recovery mode 1 miimon 100 updelay 2000
+test_bond_recovery mode 1 miimon 100 updelay 5000
+test_bond_recovery mode 1 miimon 100 updelay 10000
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh b/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh
new file mode 100755
index 000000000000..2330d37453f9
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+# When the bond is configured with down/updelay and the link state of
+# slave members flaps if there are no remaining members up the bond
+# should immediately select a member to bring up. (from bonding.txt
+# section 13.1 paragraph 4)
+#
+# +-------------+ +-----------+
+# | client | | switch |
+# | | | |
+# | +--------| link1 |-----+ |
+# | | +-------+ | |
+# | | | | | |
+# | | +-------+ | |
+# | | bond | link2 | Br0 | |
+# +-------------+ +-----------+
+# 172.20.2.1 172.20.2.2
+
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+source "$lib_dir"/lag_lib.sh
+
+cleanup()
+{
+ lag_cleanup
+}
+
+trap cleanup 0 1 2
+
+lag_setup_network
+test_bond_recovery mode 2 miimon 100 updelay 0
+test_bond_recovery mode 2 miimon 100 updelay 200
+test_bond_recovery mode 2 miimon 100 updelay 500
+test_bond_recovery mode 2 miimon 100 updelay 1000
+test_bond_recovery mode 2 miimon 100 updelay 2000
+test_bond_recovery mode 2 miimon 100 updelay 5000
+test_bond_recovery mode 2 miimon 100 updelay 10000
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/bonding/settings b/tools/testing/selftests/drivers/net/bonding/settings
index 867e118223cd..6091b45d226b 100644
--- a/tools/testing/selftests/drivers/net/bonding/settings
+++ b/tools/testing/selftests/drivers/net/bonding/settings
@@ -1 +1 @@
-timeout=60
+timeout=120
--
2.31.1
\
 
 \ /
  Last update: 2022-11-22 21:27    [W:0.062 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site