lkml.org 
[lkml]   [2022]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Input: matrix_keypad - force switch rows to input mode
Date
Some Pin/GPIO controllers can't get current GPIO status when interrupt
mode is set. Specifically Ingenic's JZ4755 always returns status at the
moment of interrupt.

The patch tries to fix that by forcibly setting pin mode to GPIO input
prior to reading actual row status. enable_row_irqs seems to set
interrupt mode back as it should be.

Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
---
drivers/input/keyboard/matrix_keypad.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 7dd3f3eda..b4c0325bb 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -127,6 +127,9 @@ static void matrix_keypad_scan(struct work_struct *work)

memset(new_state, 0, sizeof(new_state));

+ for (row = 0; row < pdata->num_row_gpios; row++)
+ gpio_direction_input(pdata->row_gpios[row]);
+
/* assert each column and read the row status out */
for (col = 0; col < pdata->num_col_gpios; col++) {

--
2.36.1
\
 
 \ /
  Last update: 2022-11-02 18:00    [W:0.031 / U:1.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site