lkml.org 
[lkml]   [2022]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 0/6] Add Xilinx RPU subsystem support
I am done reviewing this set.  Other than the comments from yesterday things
look good. There is also the fact that this set doesn't apply to the current
rproc-next.

I hope to see another patchset from you in the coming 2 weeks so that can get
this in for the v6.2 cycle.

Thanks,
Mathieu

On Tue, Oct 11, 2022 at 02:24:55PM -0700, Tanmay Shah wrote:
> This patch series adds bindings document for RPU subsystem found on Xilinx
> ZynqMP platforms. It also adds device nodes and driver to enable RPU
> subsystem in split mode and lockstep mode.
>
> Xilinx ZynqMP platform contains Remote Processing Unit(RPU). RPU subsystem
> contains two arm cortex r5f cores. RPU subsystem can be configured in
> split mode, lockstep mode and single-cpu mode.
>
> RPU subsystem also contains 4 Tightly Coupled Memory(TCM) banks.
> In lockstep mode, all 4 banks are combined and total of 256KB memory is
> made available to r5 core0. In split mode, both cores can access two
> TCM banks i.e. 128 KB.
>
> RPU can also fetch data and execute instructions from DDR memory along with
> TCM memory.
> ---
>
> Changes in v10:
> - bindings: rename example node to remoteproc
> - dts: Rename node name to remoteproc
> - switch to AMD email ID
> - fix Kconfig unmet dependecy error reported by kernel test robot
> - fix r5_rproc object mem leak in function zynqmp_r5_add_rproc_core
> - add explanation of hardcoded TCM nodes
> - remove redundant ToDo comment
> - remove redundant check of tcm_bank_count and rmem_count
> - remove explicit free reserved_mem in zynqmp_r5_get_mem_region_node
> - fix leaked reference of child_dev during zynqmp_r5_cluster_init
> Also fix possible crash in exit path release_r5_cores
> - do not remove mem-region and tcm carveouts explicitly in case of failure.
> It will be deleted as part of rproc_del. This also simplifies logic to
> use rproc_add_carveout
> - fix documentation all over the driver
>
> Changes in v9:
> - bindings: remove power-domains property description
> - bindings: fix nitpicks in description of properties
> - dts: remove unused labels
> - replace devm_rproc_alloc with rproc_alloc
> - %s/until/while/r
> - %s/i > -1/i >=0/r
> - fix type of tcm_mode from int to enum rpu_tcm_comb
> - release &child_pdev->dev references
> - remove zynqmp_r5_core_exit()
> - undefined memory-region property isn't failure
> - remove tcm bank count check from ops
> - fix tcm bank turn-off sequence
> - fix parse_fw function documentation
> - do not use rproc_mem_entry_init on vdev0buffers
> - check tcm banks shouldn't be 0
> - declare variabls in reverse xmas tree order
> - remove extra line
>
> Changes in v8:
> - add 'items:' for sram property
>
> Changes in v7:
> - Add minItems in sram property
>
> Changes in v6:
> - Add maxItems to sram and memory-region property
>
> Changes in v5:
> - Add constraints of the possible values of xlnx,cluster-mode property
> - fix description of power-domains property for r5 core
> - Remove reg, address-cells and size-cells properties as it is not required
> - Fix description of mboxes property
> - Add description of each memory-region and remove old .txt binding link
> reference in the description
> - Remove optional reg property from r5fss node
> - Move r5fss node out of axi node
>
> Changes in v4:
> - Add memory-region, mboxes and mbox-names properties in dt-bindings example
> - Add reserved memory region node and use it in Xilinx dt RPU subsystem node
> - Remove redundant header files
> - use dev_err_probe() to report errors during probe
> - Fix missing check on error code returned by zynqmp_r5_add_rproc_core()
> - Fix memory leaks all over the driver when resource allocation fails for any core
> - make cluster mode check only at one place
> - remove redundant initialization of variable
> - remove redundant use of of_node_put()
> - Fix Comment format problem
> - Assign offset of zynqmp_tcm_banks instead of duplicating it
> - Add tcm and memory regions rproc carveouts during prepare instead of parse_fw
> - Remove rproc_mem_entry object from r5_core
> - Use put_device() and rproc_del() APIs to fix memory leaks
> - Replace pr_* with dev_*. This was missed in v3, fix now.
> - Use "GPL" instead of "GPL v2" in MODULE_LICENSE macro. This was reported by checkpatch script.
>
> Changes in v3:
> - Fix checkpatch script indentation warning
> - Remove unused variable from xilinx remoteproc driver
> - use C style comments, i.e /*...*/
> - Remove redundant debug information which can be derived using /proc/device-tree
> - Fix multiline comment format
> - s/"final fot TCM"/"final for TCM"
> - Function devm_kzalloc() does not return an code on error, just NULL.
> Remove redundant error check for this function throughout the driver.
> - Fix RPU mode configuration and add documentation accordingly
> - Get rid of the indentations to match function documentation style with rest of the driver
> - Fix memory leak by only using r5_rproc->priv and not replace it with new instance
> - Use 'i' for the outer loop and 'j' for the inner one as per convention
> - Remove redundant error and NULL checks throughout the driver
> - Use devm_kcalloc() when more than one element is required
> - Add memory-regions carveouts during driver probe instead of parse_fw call
> This removes redundant copy of reserved_mem object in r5_core structure.
> - Fix memory leak by using of_node_put()
> - Fix indentation of tcm_mem_map function args
> - Remove redundant init of variables
> - Initialize tcm bank size variable for lockstep mode
> - Replace u32 with phys_addr_t for variable stroing memory bank address
> - Add documentation of TCM behavior in lockstep mode
> - Use dev_get_drvdata instead of platform driver API
> - Remove info level messages
> - Fix checkpatch.pl warnings
> - Add documentation for the Xilinx r5f platform to understand driver design
>
> Changes in v2:
> - Remove proprietary copyright footer from cover letter
>
>
> Ben Levinsky (3):
> firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU
> configuration.
> firmware: xilinx: Add shutdown/wakeup APIs
> firmware: xilinx: Add RPU configuration APIs
>
> Tanmay Shah (3):
> dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
> arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
> drivers: remoteproc: Add Xilinx r5 remoteproc driver
>
> .../bindings/remoteproc/xlnx,r5f-rproc.yaml | 135 +++
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 32 +
> drivers/firmware/xilinx/zynqmp.c | 97 ++
> drivers/remoteproc/Kconfig | 13 +
> drivers/remoteproc/Makefile | 1 +
> drivers/remoteproc/xlnx_r5_remoteproc.c | 1070 +++++++++++++++++
> include/dt-bindings/power/xlnx-zynqmp-power.h | 6 +
> include/linux/firmware/xlnx-zynqmp.h | 60 +
> 8 files changed, 1414 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> create mode 100644 drivers/remoteproc/xlnx_r5_remoteproc.c
>
>
> base-commit: abac55caaeaaabd31763a7c8a79c4cc096b415ae
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-11-02 20:55    [W:1.560 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site