lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v10 5/6] firmware: xilinx: Add RPU configuration APIs
From


On 10/11/22 23:25, Tanmay Shah wrote:
> From: Ben Levinsky <ben.levinsky@amd.com>
>
> This patch adds APIs to access to configure RPU and its
> processor-specific memory.
>
> That is query the run-time mode of RPU as either split or lockstep as well
> as API to set this mode. In addition add APIs to access configuration of
> the RPUs' tightly coupled memory (TCM).
>
> Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
> Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
> ---
>
> Changes in v10:
> - None
>
> Changes in v9:
> - None
>
> Changes in v8:
> - None
>
> Changes in v7:
> - None
>
> Changes in v6:
> - None
>
> Changes in v5:
> - None
>
> Changes in v4:
> - None
>
> Changes in v3:
> - Add missing function argument documentation
>
> drivers/firmware/xilinx/zynqmp.c | 62 ++++++++++++++++++++++++++++
> include/linux/firmware/xlnx-zynqmp.h | 18 ++++++++
> 2 files changed, 80 insertions(+)
>
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index edb13167170f..eba359e66414 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -1159,6 +1159,68 @@ int zynqmp_pm_release_node(const u32 node)
> }
> EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
>
> +/**
> + * zynqmp_pm_get_rpu_mode() - Get RPU mode
> + * @node_id: Node ID of the device
> + * @rpu_mode: return by reference value
> + * either split or lockstep
> + *
> + * Return: return 0 on success or error+reason.
> + * if success, then rpu_mode will be set
> + * to current rpu mode.
> + */
> +int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode)
> +{
> + u32 ret_payload[PAYLOAD_ARG_CNT];
> + int ret;
> +
> + ret = zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
> + IOCTL_GET_RPU_OPER_MODE, 0, 0, ret_payload);
> +
> + /* only set rpu_mode if no error */
> + if (ret == XST_PM_SUCCESS)
> + *rpu_mode = ret_payload[0];
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_get_rpu_mode);
> +
> +/**
> + * zynqmp_pm_set_rpu_mode() - Set RPU mode
> + * @node_id: Node ID of the device
> + * @rpu_mode: Argument 1 to requested IOCTL call. either split or lockstep
> + *
> + * This function is used to set RPU mode to split or
> + * lockstep
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode)
> +{
> + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
> + IOCTL_SET_RPU_OPER_MODE, (u32)rpu_mode,
> + 0, NULL);
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_set_rpu_mode);
> +
> +/**
> + * zynqmp_pm_set_tcm_config - configure TCM
> + * @node_id: Firmware specific TCM subsystem ID
> + * @tcm_mode: Argument 1 to requested IOCTL call
> + * either PM_RPU_TCM_COMB or PM_RPU_TCM_SPLIT
> + *
> + * This function is used to set RPU mode to split or combined
> + *
> + * Return: status: 0 for success, else failure
> + */
> +int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode)
> +{
> + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
> + IOCTL_TCM_COMB_CONFIG, (u32)tcm_mode, 0,
> + NULL);
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_set_tcm_config);
> +
> /**
> * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to
> * be powered down forcefully
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index d52f8413b892..83c69c968e32 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -503,6 +503,9 @@ int zynqmp_pm_request_wake(const u32 node,
> const bool set_addr,
> const u64 address,
> const enum zynqmp_pm_request_ack ack);
> +int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode);
> +int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1);
> +int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1);
> #else
> static inline int zynqmp_pm_get_api_version(u32 *version)
> {
> @@ -787,6 +790,21 @@ static inline int zynqmp_pm_request_wake(const u32 node,
> {
> return -ENODEV;
> }
> +
> +static inline int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode)
> +{
> + return -ENODEV;
> +}
> +
> +static inline int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1)
> +{
> + return -ENODEV;
> +}
> +
> +static inline int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1)
> +{
> + return -ENODEV;
> +}
> #endif
>
> #endif /* __FIRMWARE_ZYNQMP_H__ */


Acked-by: Michal Simek <michal.simek@amd.com>

M

\
 
 \ /
  Last update: 2022-10-25 15:08    [W:1.707 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site