lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/4] dt-bindings: interrupt-controller: mediatek,cirq: Migrate to dt schema
Date
Migrate mediatek,cirq.txt to dt schema as mediatek,mtk-cirq.yaml.
While at it, I've also fixed some typos that were present in the
original txt binding, as it was suggesting that the compatible
string would have "mediatek,cirq" as compatible but, in reality,
that's supposed to be "mediatek,mtk-cirq" instead.

Little rewording on property descriptions also happened for
them to be more concise.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
.../interrupt-controller/mediatek,cirq.txt | 33 ---------
.../mediatek,mtk-cirq.yaml | 70 +++++++++++++++++++
2 files changed, 70 insertions(+), 33 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
deleted file mode 100644
index 5865f4f2c69d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Mediatek 27xx cirq
-
-In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to
-work outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC.
-The external interrupts (outside MCUSYS) will feed through CIRQ and connect
-to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
-interrupts and generate a pulse signal to parent interrupt controller when
-flush command is executed. With CIRQ, MCUSYS can be completely turned off
-to improve the system power consumption without losing interrupts.
-
-Required properties:
-- compatible: should be one of
- - "mediatek,mt2701-cirq" for mt2701 CIRQ
- - "mediatek,mt8135-cirq" for mt8135 CIRQ
- - "mediatek,mt8173-cirq" for mt8173 CIRQ
- and "mediatek,cirq" as a fallback.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- reg: Physical base address of the cirq registers and length of memory
- mapped region.
-- mediatek,ext-irq-range: Identifies external irq number range in different
- SOCs.
-
-Example:
- cirq: interrupt-controller@10204000 {
- compatible = "mediatek,mt2701-cirq",
- "mediatek,mtk-cirq";
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupt-parent = <&sysirq>;
- reg = <0 0x10204000 0 0x400>;
- mediatek,ext-irq-start = <32 200>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
new file mode 100644
index 000000000000..21e709169907
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mtk-cirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Interrupt Controller
+
+maintainers:
+ - Youlin Pei <youlin.pei@mediatek.com>
+
+description:
+ In MediaTek SoCs, the CIRQ is a low power interrupt controller designed to
+ work outside of MCUSYS which comprises with Cortex-Ax cores, CCI and GIC.
+ The external interrupts (outside MCUSYS) will feed through CIRQ and connect
+ to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
+ interrupts and generate a pulse signal to parent interrupt controller when
+ flush command is executed. With CIRQ, MCUSYS can be completely turned off
+ to improve the system power consumption without losing interrupts.
+
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - mediatek,mt2701-cirq
+ - mediatek,mt8135-cirq
+ - mediatek,mt8173-cirq
+ - const: mediatek,mtk-cirq
+
+ reg:
+ maxItems: 1
+ description: Address and size of the CIRQ registers
+
+ '#interrupt-cells':
+ const: 3
+
+ interrupt-controller: true
+
+ mediatek,ext-irq-range:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 1
+ items:
+ items:
+ - description: First CIRQ interrupt
+ - description: Last CIRQ interrupt
+ description:
+ Identifies the range of external interrupts in different SoCs
+
+required:
+ - compatible
+ - reg
+ - '#interrupt-cells'
+ - interrupt-controller
+ - mediatek,ext-irq-range
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ cirq: interrupt-controller@10204000 {
+ compatible = "mediatek,mt2701-cirq", "mediatek,mtk-cirq";
+ reg = <0x10204000 0x400>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&sysirq>;
+ mediatek,ext-irq-range = <32 200>;
+ };
--
2.38.1
\
 
 \ /
  Last update: 2022-11-18 11:08    [W:1.122 / U:1.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site