lkml.org 
[lkml]   [2022]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/9] arm64: dts: qcom: pmk8350: Allow specifying arbitrary SID
Date
PMK8350 is shipped on SID6 with some SoCs, for example with SM6375.
Add some preprocessor logic to allow changing the SID in cases like
this.

While I am not in favour of adding #if's into the device tree, this
is the least messy way to handle this. If one isn't specified, it
will default to 0 (as it has been previously).

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/pmk8350.dtsi | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index a7ec9d11946d..2730d97ab213 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -8,10 +8,15 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

+/* (Sadly) this PMIC can be configured to be at different SIDs */
+#ifndef PMK8350_SID
+ #define PMK8350_SID 0
+#endif
+
&spmi_bus {
- pmk8350: pmic@0 {
+ pmk8350: pmic@PMK8350_SID {
compatible = "qcom,pmk8350", "qcom,spmi-pmic";
- reg = <0x0 SPMI_USID>;
+ reg = <PMK8350_SID SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;

@@ -21,14 +26,14 @@ pmk8350_pon: pon@1300 {

pon_pwrkey: pwrkey {
compatible = "qcom,pmk8350-pwrkey";
- interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_POWER>;
status = "disabled";
};

pon_resin: resin {
compatible = "qcom,pmk8350-resin";
- interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
status = "disabled";
};
};
@@ -38,14 +43,14 @@ pmk8350_vadc: adc@3100 {
reg = <0x3100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
};

pmk8350_adc_tm: adc-tm@3400 {
compatible = "qcom,adc-tm7";
reg = <0x3400>;
- interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <PMK8350_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#thermal-sensor-cells = <1>;
@@ -56,7 +61,7 @@ pmk8350_rtc: rtc@6100 {
compatible = "qcom,pmk8350-rtc";
reg = <0x6100>, <0x6200>;
reg-names = "rtc", "alarm";
- interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <PMK8350_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};

--
2.38.1
\
 
 \ /
  Last update: 2022-11-15 16:28    [W:0.034 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site