lkml.org 
[lkml]   [2022]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 4/9] dt-bindings: Add RISC-V incoming MSI controller bindings
From
On 14/11/2022 16:04, Anup Patel wrote:
> On Mon, Nov 14, 2022 at 5:52 PM Krzysztof Kozlowski

>>>>> + riscv,slow-ipi:
>>>>> + type: boolean
>>>>> + description:
>>>>> + The presence of this property implies that software interrupts (i.e.
>>>>> + IPIs) using IMSIC software injected MSIs is slower compared to other
>>>>> + software interrupt mechanisms (such as SBI IPI) on the underlying
>>>>> + RISC-V platform.
>>>>
>>>> Is this a property of software or hardware?
>>>
>>> This is a property of hardware (or implementation) because IPIs
>>> in IMSIC are software injected MSIs so if IMSIC is trap-n-emulated
>>> by a hypervisor then all writes to MSI register will trap to hypervisor
>>> in which case IPI injection via IMSIC is slow.
>>>
>>> The presence of "riscv,slow-ipi" DT property provides a hint to
>>> driver that using IPIs through IMSIC is slow on this platform so
>>> if there are other IPI mechanisms (such as SBI IPI calls) then
>>> OS should prefer those mechanisms.
>>
>> If this is specific to implementation, why it is not included already in
>> the compatible?
>>
>> The name is anyway too vague. What is "slow"? Describe real
>> characteristics of hardware, e.g. trapped via hypervisor.
>
> Okay, how about renaming it to "riscv,trap-n-emulated" ?

Sounds ok.

>
> Alternately, we can add "riscv,soft-imsics" as an implementation
> specific compatible string which hypervisors can use to describe
> trap-n-emulated IMSICs. This "riscv,soft-imsics" can also replace
> "vendor,chip-imsics" dummy string ?

soft-imsics would work only if it is a real device. My question was
rather whether this is something configurable or fixed in given
implementation.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-11-15 15:17    [W:0.270 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site