lkml.org 
[lkml]   [2022]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] iommu/hyper-v: Allow hyperv irq remapping without x2apic
Date
From: Wei Liu <wei.liu@kernel.org> Sent: Friday, November 11, 2022 9:27 AM
>
> On Fri, Nov 11, 2022 at 04:55:22PM +0000, Michael Kelley (LINUX) wrote:
> > From: Wei Liu <wei.liu@kernel.org> Sent: Friday, November 11, 2022 8:33 AM
> > >
> > > Hi Tianyu
> > >
> > > On Wed, Nov 09, 2022 at 11:07:33AM -0800, Nuno Das Neves wrote:
> > > > If x2apic is not available, hyperv-iommu skips remapping
> > > > irqs. This breaks root partition which always needs irqs
> > > > remapped.
> > > >
> > > > Fix this by allowing irq remapping regardless of x2apic,
> > > > and change hyperv_enable_irq_remapping() to return
> > > > IRQ_REMAP_XAPIC_MODE in case x2apic is missing.
> > > >
> > >
> > > Do you remember why it was x2apic only?
> > >
> > > We tested this patch on different VM SKUs and it worked fine. I'm just
> > > wondering if there would be some subtle breakages that we couldn't
> > > easily test.
> > >
> > > Thanks,
> > > Wei.
> >
> > My recollection is that originally Hyper-V provided the x2apic in the
> > guest only when the number of vCPUs exceeded 255, and that was
> > the only case where IRQ remapping was needed. The intent was to
> > not disturb the case where # of vCPUs was < 255 and the xapic is used.
> > I don't remember there being any potential for subtle breakages.
>
> Thanks for the information.
>
> >
> > I think more recent versions of Hyper-V now provide the x2apic
> > in the guest in some cases when # of vCPUs is < 255.
> >
>
> On Azure the default for AMD SKUs is still xapic unless the number of
> VCPUs exceeds 2XX (can't remember the exact number -- maybe it is 255).

I don't think Azure has any VM sizes based on AMD processors with more
than 255 vCPUs. All the >255 vCPUs VM sizes use Intel processors.

FWIW, I have a D2ds_v5 VM (2 CPUs & Intel processor) that shows an
x2apic instead of an xapic. My memory is vague, but I think that's the
requirements to get an x2apic in a smaller VM: must be a "v5" series and
must be Intel processor.

Michael

>
> Nuno, can you list the tests you've done? They will need to cover Linux
> running as a normal guest on Azure and Hyper-V.
>
> Thanks,
> Wei.
>
>
> > Michael
> >
> > >
> > > > Tested with root and non-root hyperv partitions.
> > > >
> > > > Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
> > > > ---
> > > > drivers/iommu/Kconfig | 6 +++---
> > > > drivers/iommu/hyperv-iommu.c | 7 ++++---
> > > > 2 files changed, 7 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> > > > index dc5f7a156ff5..cf7433652db0 100644
> > > > --- a/drivers/iommu/Kconfig
> > > > +++ b/drivers/iommu/Kconfig
> > > > @@ -474,13 +474,13 @@ config QCOM_IOMMU
> > > > Support for IOMMU on certain Qualcomm SoCs.
> > > >
> > > > config HYPERV_IOMMU
> > > > - bool "Hyper-V x2APIC IRQ Handling"
> > > > + bool "Hyper-V IRQ Handling"
> > > > depends on HYPERV && X86
> > > > select IOMMU_API
> > > > default HYPERV
> > > > help
> > > > - Stub IOMMU driver to handle IRQs as to allow Hyper-V Linux
> > > > - guests to run with x2APIC mode enabled.
> > > > + Stub IOMMU driver to handle IRQs to support Hyper-V Linux
> > > > + guest and root partitions.
> > > >
> > > > config VIRTIO_IOMMU
> > > > tristate "Virtio IOMMU driver"
> > > > diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c
> > > > index e190bb8c225c..abd1826a9e63 100644
> > > > --- a/drivers/iommu/hyperv-iommu.c
> > > > +++ b/drivers/iommu/hyperv-iommu.c
> > > > @@ -123,8 +123,7 @@ static int __init hyperv_prepare_irq_remapping(void)
> > > > const struct irq_domain_ops *ops;
> > > >
> > > > if (!hypervisor_is_type(X86_HYPER_MS_HYPERV) ||
> > > > - x86_init.hyper.msi_ext_dest_id() ||
> > > > - !x2apic_supported())
> > > > + x86_init.hyper.msi_ext_dest_id())
> > > > return -ENODEV;
> > > >
> > > > if (hv_root_partition) {
> > > > @@ -170,7 +169,9 @@ static int __init hyperv_prepare_irq_remapping(void)
> > > >
> > > > static int __init hyperv_enable_irq_remapping(void)
> > > > {
> > > > - return IRQ_REMAP_X2APIC_MODE;
> > > > + if (x2apic_supported())
> > > > + return IRQ_REMAP_X2APIC_MODE;
> > > > + return IRQ_REMAP_XAPIC_MODE;
> > > > }
> > > >
> > > > struct irq_remap_ops hyperv_irq_remap_ops = {
> > > > --
> > > > 2.25.1
> > > >

\
 
 \ /
  Last update: 2022-11-11 19:00    [W:0.045 / U:3.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site