lkml.org 
[lkml]   [2022]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] iommu/hyper-v: Allow hyperv irq remapping without x2apic
Date
From: Wei Liu <wei.liu@kernel.org> Sent: Friday, November 11, 2022 8:33 AM
>
> Hi Tianyu
>
> On Wed, Nov 09, 2022 at 11:07:33AM -0800, Nuno Das Neves wrote:
> > If x2apic is not available, hyperv-iommu skips remapping
> > irqs. This breaks root partition which always needs irqs
> > remapped.
> >
> > Fix this by allowing irq remapping regardless of x2apic,
> > and change hyperv_enable_irq_remapping() to return
> > IRQ_REMAP_XAPIC_MODE in case x2apic is missing.
> >
>
> Do you remember why it was x2apic only?
>
> We tested this patch on different VM SKUs and it worked fine. I'm just
> wondering if there would be some subtle breakages that we couldn't
> easily test.
>
> Thanks,
> Wei.

My recollection is that originally Hyper-V provided the x2apic in the
guest only when the number of vCPUs exceeded 255, and that was
the only case where IRQ remapping was needed. The intent was to
not disturb the case where # of vCPUs was < 255 and the xapic is used.
I don't remember there being any potential for subtle breakages.

I think more recent versions of Hyper-V now provide the x2apic
in the guest in some cases when # of vCPUs is < 255.

Michael

>
> > Tested with root and non-root hyperv partitions.
> >
> > Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
> > ---
> > drivers/iommu/Kconfig | 6 +++---
> > drivers/iommu/hyperv-iommu.c | 7 ++++---
> > 2 files changed, 7 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> > index dc5f7a156ff5..cf7433652db0 100644
> > --- a/drivers/iommu/Kconfig
> > +++ b/drivers/iommu/Kconfig
> > @@ -474,13 +474,13 @@ config QCOM_IOMMU
> > Support for IOMMU on certain Qualcomm SoCs.
> >
> > config HYPERV_IOMMU
> > - bool "Hyper-V x2APIC IRQ Handling"
> > + bool "Hyper-V IRQ Handling"
> > depends on HYPERV && X86
> > select IOMMU_API
> > default HYPERV
> > help
> > - Stub IOMMU driver to handle IRQs as to allow Hyper-V Linux
> > - guests to run with x2APIC mode enabled.
> > + Stub IOMMU driver to handle IRQs to support Hyper-V Linux
> > + guest and root partitions.
> >
> > config VIRTIO_IOMMU
> > tristate "Virtio IOMMU driver"
> > diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c
> > index e190bb8c225c..abd1826a9e63 100644
> > --- a/drivers/iommu/hyperv-iommu.c
> > +++ b/drivers/iommu/hyperv-iommu.c
> > @@ -123,8 +123,7 @@ static int __init hyperv_prepare_irq_remapping(void)
> > const struct irq_domain_ops *ops;
> >
> > if (!hypervisor_is_type(X86_HYPER_MS_HYPERV) ||
> > - x86_init.hyper.msi_ext_dest_id() ||
> > - !x2apic_supported())
> > + x86_init.hyper.msi_ext_dest_id())
> > return -ENODEV;
> >
> > if (hv_root_partition) {
> > @@ -170,7 +169,9 @@ static int __init hyperv_prepare_irq_remapping(void)
> >
> > static int __init hyperv_enable_irq_remapping(void)
> > {
> > - return IRQ_REMAP_X2APIC_MODE;
> > + if (x2apic_supported())
> > + return IRQ_REMAP_X2APIC_MODE;
> > + return IRQ_REMAP_XAPIC_MODE;
> > }
> >
> > struct irq_remap_ops hyperv_irq_remap_ops = {
> > --
> > 2.25.1
> >

\
 
 \ /
  Last update: 2022-11-11 17:56    [W:0.064 / U:3.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site