lkml.org 
[lkml]   [2022]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/8] dt-bindings: media: add bindings for TI DS90UB960
Date
Add DT bindings for TI DS90UB960 FPDLink-3 Deserializer.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
.../bindings/media/i2c/ti,ds90ub960.yaml | 392 ++++++++++++++++++
1 file changed, 392 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
new file mode 100644
index 000000000000..4456d9b3e2c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
@@ -0,0 +1,392 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+
+description: |
+ The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO
+ forwarding.
+
+properties:
+ compatible:
+ enum:
+ - ti,ds90ub960-q1
+ - ti,ds90ub9702-q1
+
+ reg:
+ maxItems: 1
+ description:
+ i2c addresses for the deserializer and the serializers
+
+ reg-names:
+ items:
+ - const: main
+
+ clocks:
+ maxItems: 1
+ description:
+ Reference clock connected to the REFCLK pin.
+
+ clock-names:
+ items:
+ - const: refclk
+
+ powerdown-gpios:
+ maxItems: 1
+ description:
+ Specifier for the GPIO connected to the PDB pin.
+
+ i2c-alias-pool:
+ $ref: /schemas/types.yaml#/definitions/uint16-array
+ description:
+ i2c alias pool for remote devices.
+
+ links:
+ type: object
+ additionalProperties: false
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ manual-strobe:
+ type: boolean
+ description:
+ Enable manual strobe position and EQ level
+
+ patternProperties:
+ '^link@[0-9a-f]+$':
+ type: object
+ additionalProperties: false
+ properties:
+ reg:
+ description: The link number
+ maxItems: 1
+
+ i2c-alias:
+ description: |
+ The i2c address used for the serializer. Transactions to this
+ address on the i2c bus where the deserializer resides are
+ forwarded to the serializer.
+
+ rx-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # RAW10
+ - 1 # RAW12 HF
+ - 2 # RAW12 LF
+ - 3 # CSI2 SYNC
+ - 4 # CSI2 NON-SYNC
+ description: FPD-Link Input Mode
+
+ cdr-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # FPD3
+ - 1 # FPD4
+ description: FPD-Link CDR Mode
+
+ strobe-pos:
+ $ref: /schemas/types.yaml#/definitions/int32
+ minimum: -13
+ maximum: 13
+ description: Manual strobe position, from -13 to 13
+
+ eq-level:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 14
+ description: Manual EQ level, from 0 to 14
+
+ serializer:
+ type: object
+ description: FPD-Link Serializer node
+
+ required:
+ - reg
+ - i2c-alias
+ - rx-mode
+ - serializer
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: FPD-Link input 0
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: FPD-Link input 1
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: FPD-Link input 2
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: FPD-Link input 3
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+
+ port@4:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: CSI-2 Output 0
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@5:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: CSI-2 Output 1
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ deser@3d {
+ compatible = "ti,ds90ub960-q1";
+
+ reg-names = "main";
+ reg = <0x3d>;
+
+ clock-names = "refclk";
+ clocks = <&fixed_clock>;
+
+ powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>;
+
+ i2c-alias-pool = /bits/ 16 <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Port 0, Camera 0 */
+ port@0 {
+ reg = <0>;
+
+ ub960_fpd3_1_in: endpoint {
+ remote-endpoint = <&ub953_1_out>;
+
+ rx-mode = <0>;
+ };
+ };
+
+ /* Port 0, Camera 1 */
+ port@1 {
+ reg = <1>;
+
+ ub960_fpd3_2_in: endpoint {
+ remote-endpoint = <&ub913_2_out>;
+
+ rx-mode = <0>;
+ };
+ };
+
+ /* Port 4, CSI-2 TX */
+ port@4 {
+ reg = <4>;
+ ds90ub960_0_csi_out: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <800000000>;
+ remote-endpoint = <&csi2_phy0>;
+ };
+ };
+ };
+
+ links {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Link 0 has DS90UB953 serializer and IMX390 sensor */
+
+ link@0 {
+ reg = <0>;
+ i2c-alias = <68>;
+
+ rx-mode = <3>;
+
+ serializer1: serializer {
+ compatible = "ti,ds90ub953-q1";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ub953_1_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&sensor_1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ub953_1_out: endpoint {
+ remote-endpoint = <&ub960_fpd3_1_in>;
+ };
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@21 {
+ compatible = "sony,imx390";
+ reg = <0x21>;
+
+ clocks = <&clk_cam_27M>;
+ clock-names = "inck";
+
+ xclr-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>;
+ error0-gpios = <&serializer1 1 GPIO_ACTIVE_HIGH>;
+ error1-gpios = <&serializer1 2 GPIO_ACTIVE_HIGH>;
+ comready-gpios = <&serializer1 3 GPIO_ACTIVE_HIGH>;
+
+ port {
+ sensor_1_out: endpoint {
+ remote-endpoint = <&ub953_1_in>;
+ };
+ };
+ };
+ };
+ };
+ }; /* End of link@0 */
+
+ /* Link 1 has DS90UB913 serializer and OV10635 sensor */
+
+ link@1 {
+ reg = <1>;
+ i2c-alias = <69>;
+
+ rx-mode = <0>;
+
+ serializer2: serializer {
+ compatible = "ti,ds90ub913a-q1";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ clocks = <&clk_cam_48M>;
+ clock-names = "clkin";
+
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ub913_2_in: endpoint {
+ remote-endpoint = <&sensor_2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ub913_2_out: endpoint {
+ remote-endpoint = <&ub960_fpd3_2_in>;
+ };
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@30 {
+ compatible = "ovti,ov10635";
+ reg = <0x30>;
+
+ clocks = <&serializer2>;
+ clock-names = "xvclk";
+
+ powerdown-gpios = <&serializer2 0 GPIO_ACTIVE_HIGH>;
+
+ port {
+ sensor_2_out: endpoint {
+ remote-endpoint = <&ub913_2_in>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ bus-width = <10>;
+ };
+ };
+ };
+ };
+ };
+ }; /* End of link@1 */
+ };
+ };
+ };
+...
--
2.34.1
\
 
 \ /
  Last update: 2022-11-01 14:22    [W:0.316 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site