lkml.org 
[lkml]   [2022]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 3/8] dt-bindings: media: add bindings for TI DS90UB960
On Tue, Nov 01, 2022 at 03:20:27PM +0200, Tomi Valkeinen wrote:
> Add DT bindings for TI DS90UB960 FPDLink-3 Deserializer.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> ---
> .../bindings/media/i2c/ti,ds90ub960.yaml | 392 ++++++++++++++++++
> 1 file changed, 392 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
> new file mode 100644
> index 000000000000..4456d9b3e2c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
> @@ -0,0 +1,392 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs
> +
> +maintainers:
> + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> +
> +description: |

Don't need '|'

> + The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO
> + forwarding.
> +
> +properties:
> + compatible:
> + enum:
> + - ti,ds90ub960-q1
> + - ti,ds90ub9702-q1
> +
> + reg:
> + maxItems: 1
> + description:
> + i2c addresses for the deserializer and the serializers
> +
> + reg-names:
> + items:
> + - const: main

'reg-names' is not all that useful with only 1 entry.

> +
> + clocks:
> + maxItems: 1
> + description:
> + Reference clock connected to the REFCLK pin.
> +
> + clock-names:
> + items:
> + - const: refclk
> +
> + powerdown-gpios:
> + maxItems: 1
> + description:
> + Specifier for the GPIO connected to the PDB pin.
> +
> + i2c-alias-pool:

Something common or could be? If not, then needs a vendor prefix.

> + $ref: /schemas/types.yaml#/definitions/uint16-array
> + description:
> + i2c alias pool for remote devices.

Needs a better description. What's an 'alias pool'?

0-0xffff are valid values?

> +
> + links:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + manual-strobe:
> + type: boolean
> + description:
> + Enable manual strobe position and EQ level
> +
> + patternProperties:
> + '^link@[0-9a-f]+$':
> + type: object
> + additionalProperties: false
> + properties:
> + reg:
> + description: The link number
> + maxItems: 1
> +
> + i2c-alias:

Vendor prefix.

> + description: |
> + The i2c address used for the serializer. Transactions to this
> + address on the i2c bus where the deserializer resides are
> + forwarded to the serializer.
> +
> + rx-mode:

Vendor prefix. And so on...

> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum:
> + - 0 # RAW10
> + - 1 # RAW12 HF
> + - 2 # RAW12 LF
> + - 3 # CSI2 SYNC
> + - 4 # CSI2 NON-SYNC
> + description: FPD-Link Input Mode
> +
> + cdr-mode:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum:
> + - 0 # FPD3
> + - 1 # FPD4
> + description: FPD-Link CDR Mode
> +
> + strobe-pos:
> + $ref: /schemas/types.yaml#/definitions/int32
> + minimum: -13
> + maximum: 13
> + description: Manual strobe position, from -13 to 13

No need to put constraints in free form text.

> +
> + eq-level:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maximum: 14
> + description: Manual EQ level, from 0 to 14
> +
> + serializer:
> + type: object
> + description: FPD-Link Serializer node
> +
> + required:
> + - reg
> + - i2c-alias
> + - rx-mode
> + - serializer
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base

additionalProperties: false

> + description: FPD-Link input 0
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#

unevaluatedProperties: false

Same for the other port nodes

> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + description: FPD-Link input 1
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + description: FPD-Link input 2
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> +
> + port@3:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + description: FPD-Link input 3
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> +
> + port@4:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + description: CSI-2 Output 0
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4

Why the constraints on this endpoint? Are the other ones actually using
properties from video-interfaces.yaml? If not, then just reference
/properties/port and drop 'endpoint' instead.

> +
> + port@5:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + description: CSI-2 Output 1
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c {
> + clock-frequency = <400000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + deser@3d {
> + compatible = "ti,ds90ub960-q1";
> +
> + reg-names = "main";
> + reg = <0x3d>;
> +
> + clock-names = "refclk";
> + clocks = <&fixed_clock>;
> +
> + powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>;
> +
> + i2c-alias-pool = /bits/ 16 <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Port 0, Camera 0 */
> + port@0 {
> + reg = <0>;
> +
> + ub960_fpd3_1_in: endpoint {
> + remote-endpoint = <&ub953_1_out>;
> +
> + rx-mode = <0>;

Looks like this is not defined under 'endpoint'.

> + };
> + };
> +
> + /* Port 0, Camera 1 */
> + port@1 {
> + reg = <1>;
> +
> + ub960_fpd3_2_in: endpoint {
> + remote-endpoint = <&ub913_2_out>;
> +
> + rx-mode = <0>;
> + };
> + };
> +
> + /* Port 4, CSI-2 TX */
> + port@4 {
> + reg = <4>;
> + ds90ub960_0_csi_out: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2 3 4>;
> + link-frequencies = /bits/ 64 <800000000>;
> + remote-endpoint = <&csi2_phy0>;
> + };
> + };
> + };
> +
> + links {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Link 0 has DS90UB953 serializer and IMX390 sensor */
> +
> + link@0 {
> + reg = <0>;
> + i2c-alias = <68>;
> +
> + rx-mode = <3>;
> +
> + serializer1: serializer {
> + compatible = "ti,ds90ub953-q1";
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + #clock-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + ub953_1_in: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2 3 4>;
> + remote-endpoint = <&sensor_1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + ub953_1_out: endpoint {
> + remote-endpoint = <&ub960_fpd3_1_in>;
> + };
> + };
> + };
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + sensor@21 {
> + compatible = "sony,imx390";
> + reg = <0x21>;
> +
> + clocks = <&clk_cam_27M>;
> + clock-names = "inck";
> +
> + xclr-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>;
> + error0-gpios = <&serializer1 1 GPIO_ACTIVE_HIGH>;
> + error1-gpios = <&serializer1 2 GPIO_ACTIVE_HIGH>;
> + comready-gpios = <&serializer1 3 GPIO_ACTIVE_HIGH>;
> +
> + port {
> + sensor_1_out: endpoint {
> + remote-endpoint = <&ub953_1_in>;
> + };
> + };
> + };
> + };
> + };
> + }; /* End of link@0 */
> +
> + /* Link 1 has DS90UB913 serializer and OV10635 sensor */
> +
> + link@1 {
> + reg = <1>;
> + i2c-alias = <69>;
> +
> + rx-mode = <0>;
> +
> + serializer2: serializer {
> + compatible = "ti,ds90ub913a-q1";
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + clocks = <&clk_cam_48M>;
> + clock-names = "clkin";
> +
> + #clock-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + ub913_2_in: endpoint {
> + remote-endpoint = <&sensor_2_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + ub913_2_out: endpoint {
> + remote-endpoint = <&ub960_fpd3_2_in>;
> + };
> + };
> + };
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + sensor@30 {
> + compatible = "ovti,ov10635";
> + reg = <0x30>;
> +
> + clocks = <&serializer2>;
> + clock-names = "xvclk";
> +
> + powerdown-gpios = <&serializer2 0 GPIO_ACTIVE_HIGH>;
> +
> + port {
> + sensor_2_out: endpoint {
> + remote-endpoint = <&ub913_2_in>;
> + hsync-active = <1>;
> + vsync-active = <1>;
> + pclk-sample = <0>;
> + bus-width = <10>;
> + };
> + };
> + };
> + };
> + };
> + }; /* End of link@1 */
> + };
> + };
> + };
> +...
> --
> 2.34.1
>
>

\
 
 \ /
  Last update: 2022-11-02 18:28    [W:0.211 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site