lkml.org 
[lkml]   [2022]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 04/12] arm64: dts: qcom: sc8280xp-pmics: Add support for PMK8280 RESIN input
From


On 29.10.2022 07:14, Manivannan Sadhasivam wrote:
> The RESIN input can be used to reset the PMK8280 PMIC. Enabling the
> RESIN block allows the PMK8280 to detect reset input via RESIN_N pin.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
> arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> index 397ff4995003..4a3464f5e6e9 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> @@ -68,6 +68,12 @@ pmk8280_pon_pwrkey: pwrkey {
> linux,code = <KEY_POWER>;
> status = "disabled";
> };
> +
> + pmk8280_pon_resin: resin {
> + compatible = "qcom,pmk8350-resin";
> + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
> + status = "disabled";
> + };
> };
> };
>

\
 
 \ /
  Last update: 2022-10-29 16:16    [W:0.191 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site