Messages in this thread | | | Date | Thu, 27 Oct 2022 22:09:51 -0400 | Subject | Re: [PATCH 07/10] dt-bindings: phy: qcom,qmp-ufs: rename current bindings | From | Krzysztof Kozlowski <> |
| |
On 24/10/2022 05:00, Johan Hovold wrote: > The current QMP UFS PHY bindings are based on the original MSM8996 PCIe > PHY binding which provided multiple PHYs per IP block and these in turn > were described by child nodes. > > The QMP UFS PHY block only provide a single PHY and the remnant child > node does not really reflect the hardware. > > The original MSM8996 binding also ended up describing the individual > register blocks as belonging to either the wrapper node or the PHY child > nodes. > > This is an unnecessary level of detail which has lead to problems when > later IP blocks using different register layouts have been forced to fit > the original mould rather than updating the binding. The bindings are > arguable also incomplete as they only the describe register blocks used > by the current Linux drivers. > > In preparation for adding new bindings for SC8280XP which further > bindings can be based on, rename the current bindings after MSM8996 and > add a reference to the SC8280XP bindings. > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> > ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards, Krzysztof
| |