lkml.org 
[lkml]   [2022]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 07/10] dt-bindings: phy: qcom,qmp-ufs: rename current bindings
    Date
    The current QMP UFS PHY bindings are based on the original MSM8996 PCIe
    PHY binding which provided multiple PHYs per IP block and these in turn
    were described by child nodes.

    The QMP UFS PHY block only provide a single PHY and the remnant child
    node does not really reflect the hardware.

    The original MSM8996 binding also ended up describing the individual
    register blocks as belonging to either the wrapper node or the PHY child
    nodes.

    This is an unnecessary level of detail which has lead to problems when
    later IP blocks using different register layouts have been forced to fit
    the original mould rather than updating the binding. The bindings are
    arguable also incomplete as they only the describe register blocks used
    by the current Linux drivers.

    In preparation for adding new bindings for SC8280XP which further
    bindings can be based on, rename the current bindings after MSM8996 and
    add a reference to the SC8280XP bindings.

    Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
    ---
    ...qcom,qmp-ufs-phy.yaml => qcom,msm8996-qmp-ufs-phy.yaml} | 7 +++++--
    1 file changed, 5 insertions(+), 2 deletions(-)
    rename Documentation/devicetree/bindings/phy/{qcom,qmp-ufs-phy.yaml => qcom,msm8996-qmp-ufs-phy.yaml} (95%)

    diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
    similarity index 95%
    rename from Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
    rename to Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
    index 815c375d0f7b..438f9606414a 100644
    --- a/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
    +++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
    @@ -1,10 +1,10 @@
    # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
    %YAML 1.2
    ---
    -$id: http://devicetree.org/schemas/phy/qcom,qmp-ufs-phy.yaml#
    +$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-ufs-phy.yaml#
    $schema: http://devicetree.org/meta-schemas/core.yaml#

    -title: Qualcomm QMP PHY controller (UFS)
    +title: Qualcomm QMP PHY controller (UFS, MSM8996)

    maintainers:
    - Vinod Koul <vkoul@kernel.org>
    @@ -13,6 +13,9 @@ description:
    QMP PHY controller supports physical layer functionality for a number of
    controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.

    + Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
    + qcom,sc8280xp-qmp-ufs-phy.yaml.
    +
    properties:
    compatible:
    enum:
    --
    2.37.3
    \
     
     \ /
      Last update: 2022-10-24 11:04    [W:4.214 / U:0.000 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site