lkml.org 
[lkml]   [2022]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v6 0/2] Enable RPi header on j721e sk
Date
The following series of patches enables RPi header
on j721e sk. It is a 40 pin io expasion header which
brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1

v6:
- Rebased to 6.1-rc1

v5:
- Enable only gpio's and i2c on the RPi Header
as per the discussion in the v4

v4:
- Correct the node name in dt binding example

v3:
- Change node name from clock to clock-controller
- Add correct description for clock-controller node

v2:
- Add full path for clock property $ref
- Remove the discription for clock pattern property,
since $ref is added
- Remove the label in the example
- Fix the indentation in the example

Sinthu Raja (1):
arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

Vijay Pothukuchi (1):
arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs

.../dts/ti/k3-j721e-common-proc-board.dts | 24 ++++++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 62 ++++++++++++++-
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 79 ++++++++++++++++++-
3 files changed, 163 insertions(+), 2 deletions(-)

--
2.38.0

\
 
 \ /
  Last update: 2022-10-21 19:31    [W:2.529 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site