lkml.org 
[lkml]   [2022]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] riscv: dts: icicle: Add GPIO controlled LEDs
Date
This adds the 4 GPIO controlled LEDs to the Microchip PolarFire-SoC
Icicle Kit device tree. The schematic doesn't specify any special
function for the LEDs, so they're added here without any default
triggers and named led1, led2, led3 and led4 just like in the schematic.

Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
---
.../boot/dts/microchip/mpfs-icicle-kit.dts | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)

diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
index ec7b7c2a3ce2..11ba4417f11a 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -5,6 +5,8 @@

#include "mpfs.dtsi"
#include "mpfs-icicle-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>

/* Clock frequency (in Hz) of the rtcclk */
#define RTCCLK_FREQ 1000000
@@ -31,6 +33,34 @@ cpus {
timebase-frequency = <RTCCLK_FREQ>;
};

+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ label = "led1";
+ };
+
+ led-2 {
+ gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ label = "led2";
+ };
+
+ led-3 {
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ label = "led3";
+ };
+
+ led-4 {
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ label = "led4";
+ };
+ };
+
ddrc_cache_lo: memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>;
--
2.37.2
\
 
 \ /
  Last update: 2022-10-20 10:39    [W:0.032 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site