lkml.org 
[lkml]   [2022]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: defconfig: build-in Qualcomm SC7180 and SM8450 interconnects
Date
On Qualcomm SC7180 and SM8450 SocS, the typical debug console serial
port is part of GENI Serial Engine QUP Wrapper Controller which uses
interconnects. This means that without interconnect drivers, the serial
might not probe. Without serial console, the root might not be mounted
by initramfs:

+ REASON=No init found. Try passing init= bootarg. PS1=(initramfs
...
(initramfs) run-init -c /dev/console -n /root /sbin/init
run-init: opening console: No such file or directory

This means that interconnect drivers on these Qualcomm SoCs cannot be
modules and must be built-in to mount rootfs.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/configs/defconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 2af94d3c1c11..c1b7fb44e381 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1301,7 +1301,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8916=m
CONFIG_INTERCONNECT_QCOM_MSM8996=m
CONFIG_INTERCONNECT_QCOM_OSM_L3=m
CONFIG_INTERCONNECT_QCOM_QCS404=m
-CONFIG_INTERCONNECT_QCOM_SC7180=m
+CONFIG_INTERCONNECT_QCOM_SC7180=y
CONFIG_INTERCONNECT_QCOM_SC7280=y
CONFIG_INTERCONNECT_QCOM_SC8180X=y
CONFIG_INTERCONNECT_QCOM_SC8280XP=y
@@ -1309,7 +1309,7 @@ CONFIG_INTERCONNECT_QCOM_SDM845=y
CONFIG_INTERCONNECT_QCOM_SM8150=m
CONFIG_INTERCONNECT_QCOM_SM8250=m
CONFIG_INTERCONNECT_QCOM_SM8350=m
-CONFIG_INTERCONNECT_QCOM_SM8450=m
+CONFIG_INTERCONNECT_QCOM_SM8450=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
--
2.34.1
\
 
 \ /
  Last update: 2022-10-21 05:28    [W:0.043 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site