lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[net-next 1/2] net: ethernet: adi: adin1110: add reset GPIO
Date
Add an optional GPIO to be used for a hardware reset of the IC.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
drivers/net/ethernet/adi/adin1110.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/drivers/net/ethernet/adi/adin1110.c b/drivers/net/ethernet/adi/adin1110.c
index 78ded19dd8c1..3e090ff9b966 100644
--- a/drivers/net/ethernet/adi/adin1110.c
+++ b/drivers/net/ethernet/adi/adin1110.c
@@ -1082,9 +1082,30 @@ static void adin1110_adjust_link(struct net_device *dev)
*/
static int adin1110_check_spi(struct adin1110_priv *priv)
{
+ struct gpio_desc *reset_gpio;
int ret;
u32 val;

+ reset_gpio = devm_gpiod_get_optional(&priv->spidev->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (reset_gpio) {
+ /* MISO pin is used for internal configuration, can't have
+ * anyone else disturbing the SDO line.
+ */
+ spi_bus_lock(priv->spidev->controller);
+
+ gpiod_set_value(reset_gpio, 1);
+ fsleep(10000);
+ gpiod_set_value(reset_gpio, 0);
+
+ /* Need to wait 90 ms before interacting with
+ * the MAC after a HW reset.
+ */
+ fsleep(90000);
+
+ spi_bus_unlock(priv->spidev->controller);
+ }
+
ret = adin1110_read_reg(priv, ADIN1110_PHY_ID, &val);
if (ret < 0)
return ret;
--
2.34.1
\
 
 \ /
  Last update: 2022-10-19 19:17    [W:0.046 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site