lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/14] ARM: davinci: remove unused board support
Date
From: Arnd Bergmann <arnd@arndb.de>

All Kconfig entries marked as "depends on UNUSED_BOARD_FILES"
and their direct dependencies are removed here as planned.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig.debug | 16 +-
arch/arm/mach-davinci/Kconfig | 130 +-
arch/arm/mach-davinci/Makefile | 9 -
arch/arm/mach-davinci/board-da830-evm.c | 690 ---------
arch/arm/mach-davinci/board-da850-evm.c | 1550 -------------------
arch/arm/mach-davinci/board-dm355-evm.c | 444 ------
arch/arm/mach-davinci/board-dm355-leopard.c | 278 ----
arch/arm/mach-davinci/board-dm365-evm.c | 855 ----------
arch/arm/mach-davinci/board-mityomapl138.c | 638 --------
arch/arm/mach-davinci/board-omapl138-hawk.c | 451 ------
arch/arm/mach-davinci/devices.c | 303 ----
arch/arm/mach-davinci/dm355.c | 832 ----------
arch/arm/mach-davinci/dm365.c | 1094 -------------
13 files changed, 5 insertions(+), 7285 deletions(-)
delete mode 100644 arch/arm/mach-davinci/board-da830-evm.c
delete mode 100644 arch/arm/mach-davinci/board-da850-evm.c
delete mode 100644 arch/arm/mach-davinci/board-dm355-evm.c
delete mode 100644 arch/arm/mach-davinci/board-dm355-leopard.c
delete mode 100644 arch/arm/mach-davinci/board-dm365-evm.c
delete mode 100644 arch/arm/mach-davinci/board-mityomapl138.c
delete mode 100644 arch/arm/mach-davinci/board-omapl138-hawk.c
delete mode 100644 arch/arm/mach-davinci/devices.c
delete mode 100644 arch/arm/mach-davinci/dm355.c
delete mode 100644 arch/arm/mach-davinci/dm365.c

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c03fd448c59e..20312792340d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -323,14 +323,6 @@ choice
Say Y here if you want the debug print routines to direct
their output to UART2 serial port on DaVinci DA8XX devices.

- config DEBUG_DAVINCI_DMx_UART0
- bool "Kernel low-level debugging on DaVinci DMx using UART0"
- depends on ARCH_DAVINCI_DMx
- select DEBUG_UART_8250
- help
- Say Y here if you want the debug print routines to direct
- their output to UART0 serial port on DaVinci DMx devices.
-
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
@@ -1590,7 +1582,6 @@ config DEBUG_UART_8250

config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
- default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
default 0x01c28000 if DEBUG_SUNXI_UART0
default 0x01c28400 if DEBUG_SUNXI_UART1
default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
@@ -1810,7 +1801,6 @@ config DEBUG_UART_VIRT
default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
- default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
default 0xfec90000 if DEBUG_RK32_UART2
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
@@ -1854,9 +1844,9 @@ config DEBUG_UART_8250_WORD
default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
- DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
- DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \
- DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
+ DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
+ DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
+ DEBUG_RK32_UART2

config DEBUG_UART_8250_PALMCHIP
bool "8250 UART is Palmchip BK-310x"
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index c8cbd9a30791..588213583051 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -14,20 +14,11 @@ menuconfig ARCH_DAVINCI

if ARCH_DAVINCI

-config ARCH_DAVINCI_DMx
- bool
-
comment "DaVinci Core Type"

-config ARCH_DAVINCI_DM355
- bool "DaVinci 355 based system"
- depends on ATAGS && UNUSED_BOARD_FILES
- select DAVINCI_AINTC
- select ARCH_DAVINCI_DMx
-
config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137/AM17x based system"
- depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+ depends on AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT
depends on ATAGS
select ARCH_DAVINCI_DA8XX
# needed on silicon revs 1.0, 1.1:
@@ -36,7 +27,7 @@ config ARCH_DAVINCI_DA830

config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
- depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+ depends on AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT
depends on ATAGS
select ARCH_DAVINCI_DA8XX
select DAVINCI_CP_INTC
@@ -44,12 +35,6 @@ config ARCH_DAVINCI_DA850
config ARCH_DAVINCI_DA8XX
bool

-config ARCH_DAVINCI_DM365
- bool "DaVinci 365 based system"
- depends on ATAGS && UNUSED_BOARD_FILES
- select DAVINCI_AINTC
- select ARCH_DAVINCI_DMx
-
comment "DaVinci Board Type"

config MACH_DA8XX_DT
@@ -61,117 +46,6 @@ config MACH_DA8XX_DT
Say y here to include support for TI DaVinci DA850 based using
Flattened Device Tree. More information at Documentation/devicetree

-config MACH_DAVINCI_DM355_EVM
- bool "TI DM355 EVM"
- default ARCH_DAVINCI_DM355
- depends on ARCH_DAVINCI_DM355
- help
- Configure this option to specify the whether the board used
- for development is a DM355 EVM
-
-config MACH_DM355_LEOPARD
- bool "DM355 Leopard board"
- depends on ARCH_DAVINCI_DM355
- help
- Configure this option to specify the whether the board used
- for development is a DM355 Leopard board.
-
-config MACH_DAVINCI_DM365_EVM
- bool "TI DM365 EVM"
- default ARCH_DAVINCI_DM365
- depends on ARCH_DAVINCI_DM365
- help
- Configure this option to specify whether the board used
- for development is a DM365 EVM
-
-config MACH_DAVINCI_DA830_EVM
- bool "TI DA830/OMAP-L137/AM17x Reference Platform"
- default ARCH_DAVINCI_DA830
- depends on ATAGS && UNUSED_BOARD_FILES
- depends on ARCH_DAVINCI_DA830
- select GPIO_PCF857X if I2C
- help
- Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
-
-choice
- prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
- depends on MACH_DAVINCI_DA830_EVM
- help
- The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
- detected automatically based on successful probe of the I2C
- based GPIO expander on that board. This option selected in this
- menu has an effect only in case of a successful UI card detection.
-
-config DA830_UI_LCD
- bool "LCD"
- help
- Say Y here to use the LCD as a framebuffer or simple character
- display.
-
-config DA830_UI_NAND
- bool "NAND flash"
- help
- Say Y here to use the NAND flash. Do not forget to setup
- the switch correctly.
-endchoice
-
-config MACH_DAVINCI_DA850_EVM
- bool "TI DA850/OMAP-L138/AM18x Reference Platform"
- depends on ATAGS && UNUSED_BOARD_FILES
- default ARCH_DAVINCI_DA850
- depends on ARCH_DAVINCI_DA850
- help
- Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
-
-choice
- prompt "Select peripherals connected to expander on UI board"
- depends on MACH_DAVINCI_DA850_EVM
- help
- The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
- EVM is detected automatically based on successful probe of the I2C
- based GPIO expander on that card. This option selected in this
- menu has an effect only in case of a successful UI card detection.
-
-config DA850_UI_NONE
- bool "No peripheral is enabled"
- help
- Say Y if you do not want to enable any of the peripherals connected
- to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
-
-config DA850_UI_RMII
- bool "RMII Ethernet PHY"
- help
- Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
- EVM. This PHY is found on the UI daughter card that is supplied with
- the EVM.
- NOTE: Please take care while choosing this option, MII PHY will
- not be functional if RMII mode is selected.
-
-config DA850_UI_SD_VIDEO_PORT
- bool "Video Port Interface"
- help
- Say Y if you want to use Video Port Interface (VPIF) on the
- DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
- UI daughter card that is supplied with the EVM.
-
-endchoice
-
-config MACH_MITYOMAPL138
- bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
- depends on ARCH_DAVINCI_DA850
- depends on ATAGS && UNUSED_BOARD_FILES
- help
- Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
- System on Module. Information on this SoM may be found at
- https://www.mitydsp.com
-
-config MACH_OMAPL138_HAWKBOARD
- bool "TI AM1808 / OMAPL-138 Hawkboard platform"
- depends on ARCH_DAVINCI_DA850
- depends on ATAGS && UNUSED_BOARD_FILES
- help
- Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
-
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 3f4894aa7528..5b15a3bbf909 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -10,20 +10,11 @@ obj-y := serial.o usb.o common.o sram.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o

# Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o usb-da8xx.o
obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o usb-da8xx.o

# Board specific
obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o pdata-quirks.o
-obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o
-obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o
-obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o
-obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o
-obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o

# Power Management
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
deleted file mode 100644
index 6299e5c8f4ea..000000000000
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ /dev/null
@@ -1,690 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA830/OMAP L137 EVM board
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
- *
- * 2007, 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/nvmem-provider.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "mux.h"
-#include "da8xx.h"
-#include "irqs.h"
-
-#define DA830_EVM_PHY_ID ""
-/*
- * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
- */
-#define ON_BD_USB_DRV GPIO_TO_PIN(1, 15)
-#define ON_BD_USB_OVC GPIO_TO_PIN(2, 4)
-
-static const short da830_evm_usb11_pins[] = {
- DA830_GPIO1_15, DA830_GPIO2_4,
- -1
-};
-
-static struct regulator_consumer_supply da830_evm_usb_supplies[] = {
- REGULATOR_SUPPLY("vbus", NULL),
-};
-
-static struct regulator_init_data da830_evm_usb_vbus_data = {
- .consumer_supplies = da830_evm_usb_supplies,
- .num_consumer_supplies = ARRAY_SIZE(da830_evm_usb_supplies),
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct fixed_voltage_config da830_evm_usb_vbus = {
- .supply_name = "vbus",
- .microvolts = 33000000,
- .init_data = &da830_evm_usb_vbus_data,
-};
-
-static struct platform_device da830_evm_usb_vbus_device = {
- .name = "reg-fixed-voltage",
- .id = 0,
- .dev = {
- .platform_data = &da830_evm_usb_vbus,
- },
-};
-
-static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = {
- .dev_id = "ohci-da8xx",
- .table = {
- GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
- { }
- },
-};
-
-static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = {
- .dev_id = "reg-fixed-voltage.0",
- .table = {
- GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, NULL, 0),
- { }
- },
-};
-
-static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = {
- &da830_evm_usb_oc_gpio_lookup,
- &da830_evm_usb_vbus_gpio_lookup,
-};
-
-static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
- /* TPS2065 switch @ 5V */
- .potpgt = (3 + 1) / 2, /* 3 ms max */
-};
-
-static __init void da830_evm_usb_init(void)
-{
- int ret;
-
- ret = da8xx_register_usb_phy_clocks();
- if (ret)
- pr_warn("%s: USB PHY CLK registration failed: %d\n",
- __func__, ret);
-
- gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups,
- ARRAY_SIZE(da830_evm_usb_gpio_lookups));
-
- ret = da8xx_register_usb_phy();
- if (ret)
- pr_warn("%s: USB PHY registration failed: %d\n",
- __func__, ret);
-
- ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
- if (ret)
- pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret);
- else {
- /*
- * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
- * with the power on to power good time of 3 ms.
- */
- ret = da8xx_register_usb20(1000, 3);
- if (ret)
- pr_warn("%s: USB 2.0 registration failed: %d\n",
- __func__, ret);
- }
-
- ret = davinci_cfg_reg_list(da830_evm_usb11_pins);
- if (ret) {
- pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
- return;
- }
-
- ret = platform_device_register(&da830_evm_usb_vbus_device);
- if (ret) {
- pr_warn("%s: Unable to register the vbus supply\n", __func__);
- return;
- }
-
- ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
- if (ret)
- pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-}
-
-static const short da830_evm_mcasp1_pins[] = {
- DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
- DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
- DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
- DA830_AXR1_11,
- -1
-};
-
-static u8 da830_iis_serializer_direction[] = {
- RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
- INACTIVE_MODE, TX_MODE, INACTIVE_MODE, INACTIVE_MODE,
- INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
-};
-
-static struct snd_platform_data da830_evm_snd_data = {
- .tx_dma_offset = 0x2000,
- .rx_dma_offset = 0x2000,
- .op_mode = DAVINCI_MCASP_IIS_MODE,
- .num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
- .tdm_slots = 2,
- .serial_dir = da830_iis_serializer_direction,
- .asp_chan_q = EVENTQ_0,
- .version = MCASP_VERSION_2,
- .txnumevt = 1,
- .rxnumevt = 1,
-};
-
-/*
- * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
- */
-static const short da830_evm_mmc_sd_pins[] = {
- DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
- DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
- DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
- DA830_MMCSD_CMD, DA830_GPIO2_1, DA830_GPIO2_2,
- -1
-};
-
-#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1)
-#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
- .dev_id = "da830-mmc.0",
- .table = {
- /* gpio chip 1 contains gpio range 32-63 */
- GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_CD_PIN, "cd",
- GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
- GPIO_ACTIVE_LOW),
- { }
- },
-};
-
-static struct davinci_mmc_config da830_evm_mmc_config = {
- .wires = 8,
- .max_freq = 50000000,
- .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static inline void da830_evm_init_mmc(void)
-{
- int ret;
-
- ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins);
- if (ret) {
- pr_warn("%s: mmc/sd mux setup failed: %d\n", __func__, ret);
- return;
- }
-
- gpiod_add_lookup_table(&mmc_gpios_table);
-
- ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
- if (ret) {
- pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret);
- gpiod_remove_lookup_table(&mmc_gpios_table);
- }
-}
-
-#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-#ifdef CONFIG_DA830_UI_NAND
-static struct mtd_partition da830_evm_nand_partitions[] = {
- /* bootloader (U-Boot, etc) in first sector */
- [0] = {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* bootloader params in the next sector */
- [1] = {
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* kernel */
- [2] = {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0,
- },
- /* file system */
- [3] = {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- }
-};
-
-/* flash bbt descriptors */
-static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
-static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
-
-static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
- NAND_BBT_WRITE | NAND_BBT_2BIT |
- NAND_BBT_VERSION | NAND_BBT_PERCHIP,
- .offs = 2,
- .len = 4,
- .veroffs = 16,
- .maxblocks = 4,
- .pattern = da830_evm_nand_bbt_pattern
-};
-
-static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
- NAND_BBT_WRITE | NAND_BBT_2BIT |
- NAND_BBT_VERSION | NAND_BBT_PERCHIP,
- .offs = 2,
- .len = 4,
- .veroffs = 16,
- .maxblocks = 4,
- .pattern = da830_evm_nand_mirror_pattern
-};
-
-static struct davinci_aemif_timing da830_evm_nandflash_timing = {
- .wsetup = 24,
- .wstrobe = 21,
- .whold = 14,
- .rsetup = 19,
- .rstrobe = 50,
- .rhold = 0,
- .ta = 20,
-};
-
-static struct davinci_nand_pdata da830_evm_nand_pdata = {
- .core_chipsel = 1,
- .parts = da830_evm_nand_partitions,
- .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
- .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
- .ecc_bits = 4,
- .bbt_options = NAND_BBT_USE_FLASH,
- .bbt_td = &da830_evm_nand_bbt_main_descr,
- .bbt_md = &da830_evm_nand_bbt_mirror_descr,
- .timing = &da830_evm_nandflash_timing,
-};
-
-static struct resource da830_evm_nand_resources[] = {
- [0] = { /* First memory resource is NAND I/O window */
- .start = DA8XX_AEMIF_CS3_BASE,
- .end = DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = { /* Second memory resource is AEMIF control registers */
- .start = DA8XX_AEMIF_CTL_BASE,
- .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device da830_evm_aemif_devices[] = {
- {
- .name = "davinci_nand",
- .id = 1,
- .dev = {
- .platform_data = &da830_evm_nand_pdata,
- },
- .num_resources = ARRAY_SIZE(da830_evm_nand_resources),
- .resource = da830_evm_nand_resources,
- },
-};
-
-static struct resource da830_evm_aemif_resource[] = {
- {
- .start = DA8XX_AEMIF_CTL_BASE,
- .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct aemif_abus_data da830_evm_aemif_abus_data[] = {
- {
- .cs = 3,
- },
-};
-
-static struct aemif_platform_data da830_evm_aemif_pdata = {
- .abus_data = da830_evm_aemif_abus_data,
- .num_abus_data = ARRAY_SIZE(da830_evm_aemif_abus_data),
- .sub_devices = da830_evm_aemif_devices,
- .num_sub_devices = ARRAY_SIZE(da830_evm_aemif_devices),
- .cs_offset = 2,
-};
-
-static struct platform_device da830_evm_aemif_device = {
- .name = "ti-aemif",
- .id = -1,
- .dev = {
- .platform_data = &da830_evm_aemif_pdata,
- },
- .resource = da830_evm_aemif_resource,
- .num_resources = ARRAY_SIZE(da830_evm_aemif_resource),
-};
-
-/*
- * UI board NAND/NOR flashes only use 8-bit data bus.
- */
-static const short da830_evm_emif25_pins[] = {
- DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
- DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
- DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
- DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
- DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
- DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
- DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
- -1
-};
-
-static inline void da830_evm_init_nand(int mux_mode)
-{
- int ret;
-
- if (HAS_MMC) {
- pr_warn("WARNING: both MMC/SD and NAND are enabled, but they share AEMIF pins\n"
- "\tDisable MMC/SD for NAND support\n");
- return;
- }
-
- ret = davinci_cfg_reg_list(da830_evm_emif25_pins);
- if (ret)
- pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret);
-
- ret = platform_device_register(&da830_evm_aemif_device);
- if (ret)
- pr_warn("%s: AEMIF device not registered\n", __func__);
-
- gpio_direction_output(mux_mode, 1);
-}
-#else
-static inline void da830_evm_init_nand(int mux_mode) { }
-#endif
-
-#ifdef CONFIG_DA830_UI_LCD
-static inline void da830_evm_init_lcdc(int mux_mode)
-{
- int ret;
-
- ret = davinci_cfg_reg_list(da830_lcdcntl_pins);
- if (ret)
- pr_warn("%s: lcdcntl mux setup failed: %d\n", __func__, ret);
-
- ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
- if (ret)
- pr_warn("%s: lcd setup failed: %d\n", __func__, ret);
-
- gpio_direction_output(mux_mode, 0);
-}
-#else
-static inline void da830_evm_init_lcdc(int mux_mode) { }
-#endif
-
-static struct nvmem_cell_info da830_evm_nvmem_cells[] = {
- {
- .name = "macaddr",
- .offset = 0x7f00,
- .bytes = ETH_ALEN,
- }
-};
-
-static struct nvmem_cell_table da830_evm_nvmem_cell_table = {
- .nvmem_name = "1-00500",
- .cells = da830_evm_nvmem_cells,
- .ncells = ARRAY_SIZE(da830_evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = {
- .nvmem_name = "1-00500",
- .cell_name = "macaddr",
- .dev_id = "davinci_emac.1",
- .con_id = "mac-address",
-};
-
-static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 64),
- { }
-};
-
-static const struct software_node da830_evm_i2c_eeprom_node = {
- .properties = da830_evm_i2c_eeprom_properties,
-};
-
-static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
- int gpio, unsigned ngpio, void *context)
-{
- gpio_request(gpio + 6, "UI MUX_MODE");
-
- /* Drive mux mode low to match the default without UI card */
- gpio_direction_output(gpio + 6, 0);
-
- da830_evm_init_lcdc(gpio + 6);
-
- da830_evm_init_nand(gpio + 6);
-
- return 0;
-}
-
-static void da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
- unsigned ngpio, void *context)
-{
- gpio_free(gpio + 6);
-}
-
-static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
- .gpio_base = DAVINCI_N_GPIO,
- .setup = da830_evm_ui_expander_setup,
- .teardown = da830_evm_ui_expander_teardown,
-};
-
-static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c256", 0x50),
- .swnode = &da830_evm_i2c_eeprom_node,
- },
- {
- I2C_BOARD_INFO("tlv320aic3x", 0x18),
- },
- {
- I2C_BOARD_INFO("pcf8574", 0x3f),
- .platform_data = &da830_evm_ui_expander_info,
- },
-};
-
-static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
- .bus_freq = 100, /* kHz */
- .bus_delay = 0, /* usec */
-};
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da830_dma_rsv_chans[][2] = {
- /* (offset, number) */
- { 8, 2},
- {12, 2},
- {24, 4},
- {30, 2},
- {-1, -1}
-};
-
-static const s16 da830_dma_rsv_slots[][2] = {
- /* (offset, number) */
- { 8, 2},
- {12, 2},
- {24, 4},
- {30, 26},
- {-1, -1}
-};
-
-static struct edma_rsv_info da830_edma_rsv[] = {
- {
- .rsv_chans = da830_dma_rsv_chans,
- .rsv_slots = da830_dma_rsv_slots,
- },
-};
-
-static struct mtd_partition da830evm_spiflash_part[] = {
- [0] = {
- .name = "DSP-UBL",
- .offset = 0,
- .size = SZ_8K,
- .mask_flags = MTD_WRITEABLE,
- },
- [1] = {
- .name = "ARM-UBL",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_16K + SZ_8K,
- .mask_flags = MTD_WRITEABLE,
- },
- [2] = {
- .name = "U-Boot",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K - SZ_32K,
- .mask_flags = MTD_WRITEABLE,
- },
- [3] = {
- .name = "U-Boot-Environment",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_16K,
- .mask_flags = 0,
- },
- [4] = {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
-};
-
-static struct flash_platform_data da830evm_spiflash_data = {
- .name = "m25p80",
- .parts = da830evm_spiflash_part,
- .nr_parts = ARRAY_SIZE(da830evm_spiflash_part),
- .type = "w25x32",
-};
-
-static struct davinci_spi_config da830evm_spiflash_cfg = {
- .io_type = SPI_IO_TYPE_DMA,
- .c2tdelay = 8,
- .t2cdelay = 8,
-};
-
-static struct spi_board_info da830evm_spi_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &da830evm_spiflash_data,
- .controller_data = &da830evm_spiflash_cfg,
- .mode = SPI_MODE_0,
- .max_speed_hz = 30000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static __init void da830_evm_init(void)
-{
- struct davinci_soc_info *soc_info = &davinci_soc_info;
- int ret;
-
- da830_register_clocks();
-
- ret = da830_register_gpio();
- if (ret)
- pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
- ret = da830_register_edma(da830_edma_rsv);
- if (ret)
- pr_warn("%s: edma registration failed: %d\n", __func__, ret);
-
- ret = davinci_cfg_reg_list(da830_i2c0_pins);
- if (ret)
- pr_warn("%s: i2c0 mux setup failed: %d\n", __func__, ret);
-
- ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
- if (ret)
- pr_warn("%s: i2c0 registration failed: %d\n", __func__, ret);
-
- da830_evm_usb_init();
-
- soc_info->emac_pdata->rmii_en = 1;
- soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID;
-
- ret = davinci_cfg_reg_list(da830_cpgmac_pins);
- if (ret)
- pr_warn("%s: cpgmac mux setup failed: %d\n", __func__, ret);
-
- ret = da8xx_register_emac();
- if (ret)
- pr_warn("%s: emac registration failed: %d\n", __func__, ret);
-
- ret = da8xx_register_watchdog();
- if (ret)
- pr_warn("%s: watchdog registration failed: %d\n",
- __func__, ret);
-
- davinci_serial_init(da8xx_serial_device);
-
- nvmem_add_cell_table(&da830_evm_nvmem_cell_table);
- nvmem_add_cell_lookups(&da830_evm_nvmem_cell_lookup, 1);
-
- i2c_register_board_info(1, da830_evm_i2c_devices,
- ARRAY_SIZE(da830_evm_i2c_devices));
-
- ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins);
- if (ret)
- pr_warn("%s: mcasp1 mux setup failed: %d\n", __func__, ret);
-
- da8xx_register_mcasp(1, &da830_evm_snd_data);
-
- da830_evm_init_mmc();
-
- ret = da8xx_register_rtc();
- if (ret)
- pr_warn("%s: rtc setup failed: %d\n", __func__, ret);
-
- ret = spi_register_board_info(da830evm_spi_info,
- ARRAY_SIZE(da830evm_spi_info));
- if (ret)
- pr_warn("%s: spi info registration failed: %d\n",
- __func__, ret);
-
- ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info));
- if (ret)
- pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret);
-
- regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da830_evm_console_init(void)
-{
- if (!machine_is_davinci_da830_evm())
- return 0;
-
- return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da830_evm_console_init);
-#endif
-
-static void __init da830_evm_map_io(void)
-{
- da830_init();
-}
-
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
- .atag_offset = 0x100,
- .map_io = da830_evm_map_io,
- .init_irq = da830_init_irq,
- .init_time = da830_init_time,
- .init_machine = da830_evm_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
deleted file mode 100644
index d752ee2b30ff..000000000000
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ /dev/null
@@ -1,1550 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA850/OMAP-L138 EVM board
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Derived from: arch/arm/mach-davinci/board-da830-evm.c
- * Original Copyrights follow:
- *
- * 2007, 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/input.h>
-#include <linux/input/tps6507x-ts.h>
-#include <linux/mfd/tps6507x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/nvmem-provider.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/uio_pruss.h>
-#include <linux/property.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/tps6507x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-#include "irqs.h"
-#include "sram.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include <media/i2c/tvp514x.h>
-#include <media/i2c/adv7343.h>
-
-#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
-#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
-#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
-
-#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
-
-static struct mtd_partition da850evm_spiflash_part[] = {
- [0] = {
- .name = "UBL",
- .offset = 0,
- .size = SZ_64K,
- .mask_flags = MTD_WRITEABLE,
- },
- [1] = {
- .name = "U-Boot",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE,
- },
- [2] = {
- .name = "U-Boot-Env",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- .mask_flags = MTD_WRITEABLE,
- },
- [3] = {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M + SZ_512K,
- .mask_flags = 0,
- },
- [4] = {
- .name = "Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- .mask_flags = 0,
- },
- [5] = {
- .name = "MAC-Address",
- .offset = SZ_8M - SZ_64K,
- .size = SZ_64K,
- .mask_flags = MTD_WRITEABLE,
- },
-};
-
-static struct nvmem_cell_info da850evm_nvmem_cells[] = {
- {
- .name = "macaddr",
- .offset = 0x0,
- .bytes = ETH_ALEN,
- }
-};
-
-static struct nvmem_cell_table da850evm_nvmem_cell_table = {
- /*
- * The nvmem name differs from the partition name because of the
- * internal works of the nvmem framework.
- */
- .nvmem_name = "MAC-Address0",
- .cells = da850evm_nvmem_cells,
- .ncells = ARRAY_SIZE(da850evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup da850evm_nvmem_cell_lookup = {
- .nvmem_name = "MAC-Address0",
- .cell_name = "macaddr",
- .dev_id = "davinci_emac.1",
- .con_id = "mac-address",
-};
-
-static struct flash_platform_data da850evm_spiflash_data = {
- .name = "m25p80",
- .parts = da850evm_spiflash_part,
- .nr_parts = ARRAY_SIZE(da850evm_spiflash_part),
- .type = "m25p64",
-};
-
-static struct davinci_spi_config da850evm_spiflash_cfg = {
- .io_type = SPI_IO_TYPE_DMA,
- .c2tdelay = 8,
- .t2cdelay = 8,
-};
-
-static struct spi_board_info da850evm_spi_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &da850evm_spiflash_data,
- .controller_data = &da850evm_spiflash_cfg,
- .mode = SPI_MODE_0,
- .max_speed_hz = 30000000,
- .bus_num = 1,
- .chip_select = 0,
- },
-};
-
-static struct mtd_partition da850_evm_norflash_partition[] = {
- {
- .name = "bootloaders + env",
- .offset = 0,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0,
- },
- {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
-};
-
-static struct physmap_flash_data da850_evm_norflash_data = {
- .width = 2,
- .parts = da850_evm_norflash_partition,
- .nr_parts = ARRAY_SIZE(da850_evm_norflash_partition),
-};
-
-static struct resource da850_evm_norflash_resource[] = {
- {
- .start = DA8XX_AEMIF_CS2_BASE,
- .end = DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
- * (128K blocks). It may be used instead of the (default) SPI flash
- * to boot, using TI's tools to install the secondary boot loader
- * (UBL) and U-Boot.
- */
-static struct mtd_partition da850_evm_nandflash_partition[] = {
- {
- .name = "u-boot env",
- .offset = 0,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "UBL",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "u-boot",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * SZ_128K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = 0x200000,
- .size = SZ_2M,
- .mask_flags = 0,
- },
- {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
-};
-
-static struct davinci_aemif_timing da850_evm_nandflash_timing = {
- .wsetup = 24,
- .wstrobe = 21,
- .whold = 14,
- .rsetup = 19,
- .rstrobe = 50,
- .rhold = 0,
- .ta = 20,
-};
-
-static struct davinci_nand_pdata da850_evm_nandflash_data = {
- .core_chipsel = 1,
- .parts = da850_evm_nandflash_partition,
- .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
- .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
- .ecc_bits = 4,
- .bbt_options = NAND_BBT_USE_FLASH,
- .timing = &da850_evm_nandflash_timing,
-};
-
-static struct resource da850_evm_nandflash_resource[] = {
- {
- .start = DA8XX_AEMIF_CS3_BASE,
- .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DA8XX_AEMIF_CTL_BASE,
- .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource da850_evm_aemif_resource[] = {
- {
- .start = DA8XX_AEMIF_CTL_BASE,
- .end = DA8XX_AEMIF_CTL_BASE + SZ_32K,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
- {
- .cs = 3,
- }
-};
-
-static struct platform_device da850_evm_aemif_devices[] = {
- {
- .name = "davinci_nand",
- .id = 1,
- .dev = {
- .platform_data = &da850_evm_nandflash_data,
- },
- .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource),
- .resource = da850_evm_nandflash_resource,
- },
- {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &da850_evm_norflash_data,
- },
- .num_resources = 1,
- .resource = da850_evm_norflash_resource,
- }
-};
-
-static struct aemif_platform_data da850_evm_aemif_pdata = {
- .cs_offset = 2,
- .abus_data = da850_evm_aemif_abus_data,
- .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data),
- .sub_devices = da850_evm_aemif_devices,
- .num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices),
-};
-
-static struct platform_device da850_evm_aemif_device = {
- .name = "ti-aemif",
- .id = -1,
- .dev = {
- .platform_data = &da850_evm_aemif_pdata,
- },
- .resource = da850_evm_aemif_resource,
- .num_resources = ARRAY_SIZE(da850_evm_aemif_resource),
-};
-
-static const short da850_evm_nand_pins[] = {
- DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
- DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
- DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
- DA850_NEMA_WE, DA850_NEMA_OE,
- -1
-};
-
-static const short da850_evm_nor_pins[] = {
- DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
- DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
- DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
- DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
- DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
- DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
- DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
- DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
- DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
- DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
- DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
- DA850_EMA_A_22, DA850_EMA_A_23,
- -1
-};
-
-#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static inline void da850_evm_setup_nor_nand(void)
-{
- int ret = 0;
-
- if (!HAS_MMC) {
- ret = davinci_cfg_reg_list(da850_evm_nand_pins);
- if (ret)
- pr_warn("%s: NAND mux setup failed: %d\n",
- __func__, ret);
-
- ret = davinci_cfg_reg_list(da850_evm_nor_pins);
- if (ret)
- pr_warn("%s: NOR mux setup failed: %d\n",
- __func__, ret);
-
- ret = platform_device_register(&da850_evm_aemif_device);
- if (ret)
- pr_warn("%s: registering aemif failed: %d\n",
- __func__, ret);
- }
-}
-
-#ifdef CONFIG_DA850_UI_RMII
-static inline void da850_evm_setup_emac_rmii(int rmii_sel)
-{
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- soc_info->emac_pdata->rmii_en = 1;
- gpio_set_value_cansleep(rmii_sel, 0);
-}
-#else
-static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
-#endif
-
-
-#define DA850_KEYS_DEBOUNCE_MS 10
-/*
- * At 200ms polling interval it is possible to miss an
- * event by tapping very lightly on the push button but most
- * pushes do result in an event; longer intervals require the
- * user to hold the button whereas shorter intervals require
- * more CPU time for polling.
- */
-#define DA850_GPIO_KEYS_POLL_MS 200
-
-enum da850_evm_ui_exp_pins {
- DA850_EVM_UI_EXP_SEL_C = 5,
- DA850_EVM_UI_EXP_SEL_B,
- DA850_EVM_UI_EXP_SEL_A,
- DA850_EVM_UI_EXP_PB8,
- DA850_EVM_UI_EXP_PB7,
- DA850_EVM_UI_EXP_PB6,
- DA850_EVM_UI_EXP_PB5,
- DA850_EVM_UI_EXP_PB4,
- DA850_EVM_UI_EXP_PB3,
- DA850_EVM_UI_EXP_PB2,
- DA850_EVM_UI_EXP_PB1,
-};
-
-static const char * const da850_evm_ui_exp[] = {
- [DA850_EVM_UI_EXP_SEL_C] = "sel_c",
- [DA850_EVM_UI_EXP_SEL_B] = "sel_b",
- [DA850_EVM_UI_EXP_SEL_A] = "sel_a",
- [DA850_EVM_UI_EXP_PB8] = "pb8",
- [DA850_EVM_UI_EXP_PB7] = "pb7",
- [DA850_EVM_UI_EXP_PB6] = "pb6",
- [DA850_EVM_UI_EXP_PB5] = "pb5",
- [DA850_EVM_UI_EXP_PB4] = "pb4",
- [DA850_EVM_UI_EXP_PB3] = "pb3",
- [DA850_EVM_UI_EXP_PB2] = "pb2",
- [DA850_EVM_UI_EXP_PB1] = "pb1",
-};
-
-#define DA850_N_UI_PB 8
-
-static struct gpio_keys_button da850_evm_ui_keys[] = {
- [0 ... DA850_N_UI_PB - 1] = {
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 0,
- .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
- .code = -1, /* assigned at runtime */
- .gpio = -1, /* assigned at runtime */
- .desc = NULL, /* assigned at runtime */
- },
-};
-
-static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
- .buttons = da850_evm_ui_keys,
- .nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
- .poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_ui_keys_device = {
- .name = "gpio-keys-polled",
- .id = 0,
- .dev = {
- .platform_data = &da850_evm_ui_keys_pdata
- },
-};
-
-static void da850_evm_ui_keys_init(unsigned gpio)
-{
- int i;
- struct gpio_keys_button *button;
-
- for (i = 0; i < DA850_N_UI_PB; i++) {
- button = &da850_evm_ui_keys[i];
- button->code = KEY_F8 - i;
- button->desc = da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
- button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
- }
-}
-
-#ifdef CONFIG_DA850_UI_SD_VIDEO_PORT
-static inline void da850_evm_setup_video_port(int video_sel)
-{
- gpio_set_value_cansleep(video_sel, 0);
-}
-#else
-static inline void da850_evm_setup_video_port(int video_sel) { }
-#endif
-
-static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
- unsigned ngpio, void *c)
-{
- int sel_a, sel_b, sel_c, ret;
-
- sel_a = gpio + DA850_EVM_UI_EXP_SEL_A;
- sel_b = gpio + DA850_EVM_UI_EXP_SEL_B;
- sel_c = gpio + DA850_EVM_UI_EXP_SEL_C;
-
- ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
- if (ret) {
- pr_warn("Cannot open UI expander pin %d\n", sel_a);
- goto exp_setup_sela_fail;
- }
-
- ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
- if (ret) {
- pr_warn("Cannot open UI expander pin %d\n", sel_b);
- goto exp_setup_selb_fail;
- }
-
- ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
- if (ret) {
- pr_warn("Cannot open UI expander pin %d\n", sel_c);
- goto exp_setup_selc_fail;
- }
-
- /* deselect all functionalities */
- gpio_direction_output(sel_a, 1);
- gpio_direction_output(sel_b, 1);
- gpio_direction_output(sel_c, 1);
-
- da850_evm_ui_keys_init(gpio);
- ret = platform_device_register(&da850_evm_ui_keys_device);
- if (ret) {
- pr_warn("Could not register UI GPIO expander push-buttons");
- goto exp_setup_keys_fail;
- }
-
- pr_info("DA850/OMAP-L138 EVM UI card detected\n");
-
- da850_evm_setup_nor_nand();
-
- da850_evm_setup_emac_rmii(sel_a);
-
- da850_evm_setup_video_port(sel_c);
-
- return 0;
-
-exp_setup_keys_fail:
- gpio_free(sel_c);
-exp_setup_selc_fail:
- gpio_free(sel_b);
-exp_setup_selb_fail:
- gpio_free(sel_a);
-exp_setup_sela_fail:
- return ret;
-}
-
-static void da850_evm_ui_expander_teardown(struct i2c_client *client,
- unsigned gpio, unsigned ngpio, void *c)
-{
- platform_device_unregister(&da850_evm_ui_keys_device);
-
- /* deselect all functionalities */
- gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1);
- gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1);
- gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1);
-
- gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
- gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
- gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
-}
-
-/* assign the baseboard expander's GPIOs after the UI board's */
-#define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp)
-#define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS)
-
-enum da850_evm_bb_exp_pins {
- DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0,
- DA850_EVM_BB_EXP_SW_RST,
- DA850_EVM_BB_EXP_TP_23,
- DA850_EVM_BB_EXP_TP_22,
- DA850_EVM_BB_EXP_TP_21,
- DA850_EVM_BB_EXP_USER_PB1,
- DA850_EVM_BB_EXP_USER_LED2,
- DA850_EVM_BB_EXP_USER_LED1,
- DA850_EVM_BB_EXP_USER_SW1,
- DA850_EVM_BB_EXP_USER_SW2,
- DA850_EVM_BB_EXP_USER_SW3,
- DA850_EVM_BB_EXP_USER_SW4,
- DA850_EVM_BB_EXP_USER_SW5,
- DA850_EVM_BB_EXP_USER_SW6,
- DA850_EVM_BB_EXP_USER_SW7,
- DA850_EVM_BB_EXP_USER_SW8
-};
-
-static const char * const da850_evm_bb_exp[] = {
- [DA850_EVM_BB_EXP_DEEP_SLEEP_EN] = "deep_sleep_en",
- [DA850_EVM_BB_EXP_SW_RST] = "sw_rst",
- [DA850_EVM_BB_EXP_TP_23] = "tp_23",
- [DA850_EVM_BB_EXP_TP_22] = "tp_22",
- [DA850_EVM_BB_EXP_TP_21] = "tp_21",
- [DA850_EVM_BB_EXP_USER_PB1] = "user_pb1",
- [DA850_EVM_BB_EXP_USER_LED2] = "user_led2",
- [DA850_EVM_BB_EXP_USER_LED1] = "user_led1",
- [DA850_EVM_BB_EXP_USER_SW1] = "user_sw1",
- [DA850_EVM_BB_EXP_USER_SW2] = "user_sw2",
- [DA850_EVM_BB_EXP_USER_SW3] = "user_sw3",
- [DA850_EVM_BB_EXP_USER_SW4] = "user_sw4",
- [DA850_EVM_BB_EXP_USER_SW5] = "user_sw5",
- [DA850_EVM_BB_EXP_USER_SW6] = "user_sw6",
- [DA850_EVM_BB_EXP_USER_SW7] = "user_sw7",
- [DA850_EVM_BB_EXP_USER_SW8] = "user_sw8",
-};
-
-#define DA850_N_BB_USER_SW 8
-
-static struct gpio_keys_button da850_evm_bb_keys[] = {
- [0] = {
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 0,
- .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
- .code = KEY_PROG1,
- .desc = NULL, /* assigned at runtime */
- .gpio = -1, /* assigned at runtime */
- },
- [1 ... DA850_N_BB_USER_SW] = {
- .type = EV_SW,
- .active_low = 1,
- .wakeup = 0,
- .debounce_interval = DA850_KEYS_DEBOUNCE_MS,
- .code = -1, /* assigned at runtime */
- .desc = NULL, /* assigned at runtime */
- .gpio = -1, /* assigned at runtime */
- },
-};
-
-static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = {
- .buttons = da850_evm_bb_keys,
- .nbuttons = ARRAY_SIZE(da850_evm_bb_keys),
- .poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_bb_keys_device = {
- .name = "gpio-keys-polled",
- .id = 1,
- .dev = {
- .platform_data = &da850_evm_bb_keys_pdata
- },
-};
-
-static void da850_evm_bb_keys_init(unsigned gpio)
-{
- int i;
- struct gpio_keys_button *button;
-
- button = &da850_evm_bb_keys[0];
- button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
- button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
-
- for (i = 0; i < DA850_N_BB_USER_SW; i++) {
- button = &da850_evm_bb_keys[i + 1];
- button->code = SW_LID + i;
- button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
- button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
- }
-}
-
-static struct gpio_led da850_evm_bb_leds[] = {
- {
- .name = "user_led2",
- },
- {
- .name = "user_led1",
- },
-};
-
-static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
- .leds = da850_evm_bb_leds,
- .num_leds = ARRAY_SIZE(da850_evm_bb_leds),
-};
-
-static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = {
- .dev_id = "leds-gpio",
- .table = {
- GPIO_LOOKUP_IDX("i2c-bb-expander",
- DA850_EVM_BB_EXP_USER_LED2, NULL,
- 0, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX("i2c-bb-expander",
- DA850_EVM_BB_EXP_USER_LED2 + 1, NULL,
- 1, GPIO_ACTIVE_LOW),
-
- { },
- },
-};
-
-static struct platform_device da850_evm_bb_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &da850_evm_bb_leds_pdata
- }
-};
-
-static int da850_evm_bb_expander_setup(struct i2c_client *client,
- unsigned gpio, unsigned ngpio,
- void *c)
-{
- int ret;
-
- /*
- * Register the switches and pushbutton on the baseboard as a gpio-keys
- * device.
- */
- da850_evm_bb_keys_init(gpio);
- ret = platform_device_register(&da850_evm_bb_keys_device);
- if (ret) {
- pr_warn("Could not register baseboard GPIO expander keys");
- goto io_exp_setup_sw_fail;
- }
-
- gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table);
- ret = platform_device_register(&da850_evm_bb_leds_device);
- if (ret) {
- pr_warn("Could not register baseboard GPIO expander LEDs");
- goto io_exp_setup_leds_fail;
- }
-
- return 0;
-
-io_exp_setup_leds_fail:
- platform_device_unregister(&da850_evm_bb_keys_device);
-io_exp_setup_sw_fail:
- return ret;
-}
-
-static void da850_evm_bb_expander_teardown(struct i2c_client *client,
- unsigned gpio, unsigned ngpio, void *c)
-{
- platform_device_unregister(&da850_evm_bb_leds_device);
- platform_device_unregister(&da850_evm_bb_keys_device);
-}
-
-static struct pca953x_platform_data da850_evm_ui_expander_info = {
- .gpio_base = DAVINCI_N_GPIO,
- .setup = da850_evm_ui_expander_setup,
- .teardown = da850_evm_ui_expander_teardown,
- .names = da850_evm_ui_exp,
-};
-
-static struct pca953x_platform_data da850_evm_bb_expander_info = {
- .gpio_base = DA850_BB_EXPANDER_GPIO_BASE,
- .setup = da850_evm_bb_expander_setup,
- .teardown = da850_evm_bb_expander_teardown,
- .names = da850_evm_bb_exp,
-};
-
-static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic3x", 0x18),
- },
- {
- I2C_BOARD_INFO("tca6416", 0x20),
- .dev_name = "ui-expander",
- .platform_data = &da850_evm_ui_expander_info,
- },
- {
- I2C_BOARD_INFO("tca6416", 0x21),
- .dev_name = "bb-expander",
- .platform_data = &da850_evm_bb_expander_info,
- },
-};
-
-static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
- .bus_freq = 100, /* kHz */
- .bus_delay = 0, /* usec */
-};
-
-/* davinci da850 evm audio machine driver */
-static u8 da850_iis_serializer_direction[] = {
- INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
- INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
- INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, TX_MODE,
- RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
-};
-
-static struct snd_platform_data da850_evm_snd_data = {
- .tx_dma_offset = 0x2000,
- .rx_dma_offset = 0x2000,
- .op_mode = DAVINCI_MCASP_IIS_MODE,
- .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
- .tdm_slots = 2,
- .serial_dir = da850_iis_serializer_direction,
- .asp_chan_q = EVENTQ_0,
- .ram_chan_q = EVENTQ_1,
- .version = MCASP_VERSION_2,
- .txnumevt = 1,
- .rxnumevt = 1,
- .sram_size_playback = SZ_8K,
- .sram_size_capture = SZ_8K,
-};
-
-static const short da850_evm_mcasp_pins[] __initconst = {
- DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
- DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
- DA850_AXR_11, DA850_AXR_12,
- -1
-};
-
-#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
-#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
- .dev_id = "da830-mmc.0",
- .table = {
- /* gpio chip 2 contains gpio range 64-95 */
- GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_CD_PIN, "cd",
- GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
- GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-static struct davinci_mmc_config da850_mmc_config = {
- .wires = 4,
- .max_freq = 50000000,
- .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static const short da850_evm_mmcsd0_pins[] __initconst = {
- DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
- DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
- DA850_GPIO4_0, DA850_GPIO4_1,
- -1
-};
-
-static struct property_entry da850_lcd_backlight_props[] = {
- PROPERTY_ENTRY_BOOL("default-on"),
- { }
-};
-
-static struct gpiod_lookup_table da850_lcd_backlight_gpio_table = {
- .dev_id = "gpio-backlight",
- .table = {
- GPIO_LOOKUP("davinci_gpio", DA850_LCD_BL_PIN, NULL, 0),
- { }
- },
-};
-
-static const struct platform_device_info da850_lcd_backlight_info = {
- .name = "gpio-backlight",
- .id = PLATFORM_DEVID_NONE,
- .properties = da850_lcd_backlight_props,
-};
-
-static struct regulator_consumer_supply da850_lcd_supplies[] = {
- REGULATOR_SUPPLY("lcd", NULL),
-};
-
-static struct regulator_init_data da850_lcd_supply_data = {
- .consumer_supplies = da850_lcd_supplies,
- .num_consumer_supplies = ARRAY_SIZE(da850_lcd_supplies),
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct fixed_voltage_config da850_lcd_supply = {
- .supply_name = "lcd",
- .microvolts = 33000000,
- .init_data = &da850_lcd_supply_data,
-};
-
-static struct platform_device da850_lcd_supply_device = {
- .name = "reg-fixed-voltage",
- .id = 1, /* Dummy fixed regulator is 0 */
- .dev = {
- .platform_data = &da850_lcd_supply,
- },
-};
-
-static struct gpiod_lookup_table da850_lcd_supply_gpio_table = {
- .dev_id = "reg-fixed-voltage.1",
- .table = {
- GPIO_LOOKUP("davinci_gpio", DA850_LCD_PWR_PIN, NULL, 0),
- { }
- },
-};
-
-static struct gpiod_lookup_table *da850_lcd_gpio_lookups[] = {
- &da850_lcd_backlight_gpio_table,
- &da850_lcd_supply_gpio_table,
-};
-
-static int da850_lcd_hw_init(void)
-{
- struct platform_device *backlight;
- int status;
-
- gpiod_add_lookup_tables(da850_lcd_gpio_lookups,
- ARRAY_SIZE(da850_lcd_gpio_lookups));
-
- backlight = platform_device_register_full(&da850_lcd_backlight_info);
- if (IS_ERR(backlight))
- return PTR_ERR(backlight);
-
- status = platform_device_register(&da850_lcd_supply_device);
- if (status)
- return status;
-
- return 0;
-}
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies[] = {
- /* Baseboard 3.3V: 5V -> TPS73701DCQ -> 3.3V */
- REGULATOR_SUPPLY("AVDD", "1-0018"),
- REGULATOR_SUPPLY("DRVDD", "1-0018"),
-
- /* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */
- REGULATOR_SUPPLY("DVDD", "1-0018"),
-
- /* UI card 3.3V: 5V -> TPS73701DCQ -> 3.3V */
- REGULATOR_SUPPLY("vcc", "1-0020"),
-};
-
-/* TPS65070 voltage regulator support */
-
-/* 3.3V */
-static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
- {
- .supply = "usb0_vdda33",
- },
- {
- .supply = "usb1_vdda33",
- },
-};
-
-/* 3.3V or 1.8V */
-static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
- {
- .supply = "dvdd3318_a",
- },
- {
- .supply = "dvdd3318_b",
- },
- {
- .supply = "dvdd3318_c",
- },
- REGULATOR_SUPPLY("IOVDD", "1-0018"),
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
- {
- .supply = "cvdd",
- },
-};
-
-/* 1.8V LDO */
-static struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
- {
- .supply = "sata_vddr",
- },
- {
- .supply = "usb0_vdda18",
- },
- {
- .supply = "usb1_vdda18",
- },
- {
- .supply = "ddr_dvdd18",
- },
-};
-
-/* 1.2V LDO */
-static struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
- {
- .supply = "sata_vdd",
- },
- {
- .supply = "pll0_vdda",
- },
- {
- .supply = "pll1_vdda",
- },
- {
- .supply = "usbs_cvdd",
- },
- {
- .supply = "vddarnwa1",
- },
-};
-
-/* We take advantage of the fact that both defdcdc{2,3} are tied high */
-static struct tps6507x_reg_platform_data tps6507x_platform_data = {
- .defdcdc_default = true,
-};
-
-static struct regulator_init_data tps65070_regulator_data[] = {
- /* dcdc1 */
- {
- .constraints = {
- .min_uV = 3150000,
- .max_uV = 3450000,
- .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS),
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
- .consumer_supplies = tps65070_dcdc1_consumers,
- },
-
- /* dcdc2 */
- {
- .constraints = {
- .min_uV = 1710000,
- .max_uV = 3450000,
- .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS),
- .boot_on = 1,
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
- .consumer_supplies = tps65070_dcdc2_consumers,
- .driver_data = &tps6507x_platform_data,
- },
-
- /* dcdc3 */
- {
- .constraints = {
- .min_uV = 950000,
- .max_uV = 1350000,
- .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS),
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
- .consumer_supplies = tps65070_dcdc3_consumers,
- .driver_data = &tps6507x_platform_data,
- },
-
- /* ldo1 */
- {
- .constraints = {
- .min_uV = 1710000,
- .max_uV = 1890000,
- .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS),
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
- .consumer_supplies = tps65070_ldo1_consumers,
- },
-
- /* ldo2 */
- {
- .constraints = {
- .min_uV = 1140000,
- .max_uV = 1320000,
- .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS),
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
- .consumer_supplies = tps65070_ldo2_consumers,
- },
-};
-
-static struct touchscreen_init_data tps6507x_touchscreen_data = {
- .poll_period = 30, /* ms between touch samples */
- .min_pressure = 0x30, /* minimum pressure to trigger touch */
- .vendor = 0, /* /sys/class/input/input?/id/vendor */
- .product = 65070, /* /sys/class/input/input?/id/product */
- .version = 0x100, /* /sys/class/input/input?/id/version */
-};
-
-static struct tps6507x_board tps_board = {
- .tps6507x_pmic_init_data = &tps65070_regulator_data[0],
- .tps6507x_ts_init_data = &tps6507x_touchscreen_data,
-};
-
-static struct i2c_board_info __initdata da850_evm_tps65070_info[] = {
- {
- I2C_BOARD_INFO("tps6507x", 0x48),
- .platform_data = &tps_board,
- },
-};
-
-static int __init pmic_tps65070_init(void)
-{
- return i2c_register_board_info(1, da850_evm_tps65070_info,
- ARRAY_SIZE(da850_evm_tps65070_info));
-}
-
-static const short da850_evm_lcdc_pins[] = {
- DA850_GPIO2_8, DA850_GPIO2_15,
- -1
-};
-
-static const short da850_evm_mii_pins[] = {
- DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
- DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
- DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
- DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
- DA850_MDIO_D,
- -1
-};
-
-static const short da850_evm_rmii_pins[] = {
- DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
- DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
- DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
- DA850_MDIO_D,
- -1
-};
-
-static struct gpiod_hog da850_evm_emac_gpio_hogs[] = {
- {
- .chip_label = "davinci_gpio",
- .chip_hwnum = DA850_MII_MDIO_CLKEN_PIN,
- .line_name = "mdio_clk_en",
- .lflags = 0,
- /* dflags set in da850_evm_config_emac() */
- },
- { }
-};
-
-static int __init da850_evm_config_emac(void)
-{
- void __iomem *cfg_chip3_base;
- int ret;
- u32 val;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
- u8 rmii_en;
-
- if (!machine_is_davinci_da850_evm())
- return 0;
-
- rmii_en = soc_info->emac_pdata->rmii_en;
-
- cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-
- val = __raw_readl(cfg_chip3_base);
-
- if (rmii_en) {
- val |= BIT(8);
- ret = davinci_cfg_reg_list(da850_evm_rmii_pins);
- pr_info("EMAC: RMII PHY configured, MII PHY will not be"
- " functional\n");
- } else {
- val &= ~BIT(8);
- ret = davinci_cfg_reg_list(da850_evm_mii_pins);
- pr_info("EMAC: MII PHY configured, RMII PHY will not be"
- " functional\n");
- }
-
- if (ret)
- pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
- __func__, ret);
-
- /* configure the CFGCHIP3 register for RMII or MII */
- __raw_writel(val, cfg_chip3_base);
-
- ret = davinci_cfg_reg(DA850_GPIO2_6);
- if (ret)
- pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
-
- da850_evm_emac_gpio_hogs[0].dflags = rmii_en ? GPIOD_OUT_HIGH
- : GPIOD_OUT_LOW;
- gpiod_add_hogs(da850_evm_emac_gpio_hogs);
-
- soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
-
- ret = da8xx_register_emac();
- if (ret)
- pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-
- return 0;
-}
-device_initcall(da850_evm_config_emac);
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
- /* (offset, number) */
- { 8, 6},
- {24, 4},
- {30, 2},
- {-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
- /* (offset, number) */
- { 8, 6},
- {24, 4},
- {30, 50},
- {-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
- /* (offset, number) */
- { 0, 28},
- {30, 2},
- {-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
- /* (offset, number) */
- { 0, 28},
- {30, 90},
- {-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
- .rsv_chans = da850_dma0_rsv_chans,
- .rsv_slots = da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
- .rsv_chans = da850_dma1_rsv_chans,
- .rsv_slots = da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
- &da850_edma_cc0_rsv,
- &da850_edma_cc1_rsv,
-};
-
-#ifdef CONFIG_CPU_FREQ
-static __init int da850_evm_init_cpufreq(void)
-{
- switch (system_rev & 0xF) {
- case 3:
- da850_max_speed = 456000;
- break;
- case 2:
- da850_max_speed = 408000;
- break;
- case 1:
- da850_max_speed = 372000;
- break;
- }
-
- return da850_register_cpufreq("pll0_sysclk3");
-}
-#else
-static __init int da850_evm_init_cpufreq(void) { return 0; }
-#endif
-
-#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
-
-#define TVP5147_CH0 "tvp514x-0"
-#define TVP5147_CH1 "tvp514x-1"
-
-/* VPIF capture configuration */
-static struct tvp514x_platform_data tvp5146_pdata = {
- .clk_polarity = 0,
- .hs_polarity = 1,
- .vs_polarity = 1,
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-static struct vpif_input da850_ch0_inputs[] = {
- {
- .input = {
- .index = 0,
- .name = "Composite",
- .type = V4L2_INPUT_TYPE_CAMERA,
- .capabilities = V4L2_IN_CAP_STD,
- .std = TVP514X_STD_ALL,
- },
- .input_route = INPUT_CVBS_VI2B,
- .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
- .subdev_name = TVP5147_CH0,
- },
-};
-
-static struct vpif_input da850_ch1_inputs[] = {
- {
- .input = {
- .index = 0,
- .name = "S-Video",
- .type = V4L2_INPUT_TYPE_CAMERA,
- .capabilities = V4L2_IN_CAP_STD,
- .std = TVP514X_STD_ALL,
- },
- .input_route = INPUT_SVIDEO_VI2C_VI1C,
- .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
- .subdev_name = TVP5147_CH1,
- },
-};
-
-static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
- {
- .name = TVP5147_CH0,
- .board_info = {
- I2C_BOARD_INFO("tvp5146", 0x5d),
- .platform_data = &tvp5146_pdata,
- },
- },
- {
- .name = TVP5147_CH1,
- .board_info = {
- I2C_BOARD_INFO("tvp5146", 0x5c),
- .platform_data = &tvp5146_pdata,
- },
- },
-};
-
-static struct vpif_capture_config da850_vpif_capture_config = {
- .subdev_info = da850_vpif_capture_sdev_info,
- .subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
- .i2c_adapter_id = 1,
- .chan_config[0] = {
- .inputs = da850_ch0_inputs,
- .input_count = ARRAY_SIZE(da850_ch0_inputs),
- .vpif_if = {
- .if_type = VPIF_IF_BT656,
- .hd_pol = 1,
- .vd_pol = 1,
- .fid_pol = 0,
- },
- },
- .chan_config[1] = {
- .inputs = da850_ch1_inputs,
- .input_count = ARRAY_SIZE(da850_ch1_inputs),
- .vpif_if = {
- .if_type = VPIF_IF_BT656,
- .hd_pol = 1,
- .vd_pol = 1,
- .fid_pol = 0,
- },
- },
- .card_name = "DA850/OMAP-L138 Video Capture",
-};
-
-/* VPIF display configuration */
-
-static struct adv7343_platform_data adv7343_pdata = {
- .mode_config = {
- .dac = { 1, 1, 1 },
- },
- .sd_config = {
- .sd_dac_out = { 1 },
- },
-};
-
-static struct vpif_subdev_info da850_vpif_subdev[] = {
- {
- .name = "adv7343",
- .board_info = {
- I2C_BOARD_INFO("adv7343", 0x2a),
- .platform_data = &adv7343_pdata,
- },
- },
-};
-
-static const struct vpif_output da850_ch0_outputs[] = {
- {
- .output = {
- .index = 0,
- .name = "Composite",
- .type = V4L2_OUTPUT_TYPE_ANALOG,
- .capabilities = V4L2_OUT_CAP_STD,
- .std = V4L2_STD_ALL,
- },
- .subdev_name = "adv7343",
- .output_route = ADV7343_COMPOSITE_ID,
- },
- {
- .output = {
- .index = 1,
- .name = "S-Video",
- .type = V4L2_OUTPUT_TYPE_ANALOG,
- .capabilities = V4L2_OUT_CAP_STD,
- .std = V4L2_STD_ALL,
- },
- .subdev_name = "adv7343",
- .output_route = ADV7343_SVIDEO_ID,
- },
-};
-
-static struct vpif_display_config da850_vpif_display_config = {
- .subdevinfo = da850_vpif_subdev,
- .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
- .chan_config[0] = {
- .outputs = da850_ch0_outputs,
- .output_count = ARRAY_SIZE(da850_ch0_outputs),
- },
- .card_name = "DA850/OMAP-L138 Video Display",
- .i2c_adapter_id = 1,
-};
-
-static __init void da850_vpif_init(void)
-{
- int ret;
-
- ret = da850_register_vpif();
- if (ret)
- pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret);
-
- ret = davinci_cfg_reg_list(da850_vpif_capture_pins);
- if (ret)
- pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n",
- ret);
-
- ret = da850_register_vpif_capture(&da850_vpif_capture_config);
- if (ret)
- pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret);
-
- ret = davinci_cfg_reg_list(da850_vpif_display_pins);
- if (ret)
- pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n",
- ret);
-
- ret = da850_register_vpif_display(&da850_vpif_display_config);
- if (ret)
- pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret);
-}
-
-#else
-static __init void da850_vpif_init(void) {}
-#endif
-
-#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000)
-
-static __init void da850_evm_init(void)
-{
- int ret;
-
- da850_register_clocks();
-
- ret = da850_register_gpio();
- if (ret)
- pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
- regulator_register_fixed(0, fixed_supplies, ARRAY_SIZE(fixed_supplies));
-
- ret = pmic_tps65070_init();
- if (ret)
- pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
-
- ret = da850_register_edma(da850_edma_rsv);
- if (ret)
- pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
- ret = davinci_cfg_reg_list(da850_i2c0_pins);
- if (ret)
- pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret);
-
- ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
- if (ret)
- pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret);
-
-
- ret = da8xx_register_watchdog();
- if (ret)
- pr_warn("%s: watchdog registration failed: %d\n",
- __func__, ret);
-
- if (HAS_MMC) {
- ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
- if (ret)
- pr_warn("%s: MMCSD0 mux setup failed: %d\n",
- __func__, ret);
-
- gpiod_add_lookup_table(&mmc_gpios_table);
-
- ret = da8xx_register_mmcsd0(&da850_mmc_config);
- if (ret)
- pr_warn("%s: MMCSD0 registration failed: %d\n",
- __func__, ret);
- }
-
- davinci_serial_init(da8xx_serial_device);
-
- nvmem_add_cell_table(&da850evm_nvmem_cell_table);
- nvmem_add_cell_lookups(&da850evm_nvmem_cell_lookup, 1);
-
- i2c_register_board_info(1, da850_evm_i2c_devices,
- ARRAY_SIZE(da850_evm_i2c_devices));
-
- /*
- * shut down uart 0 and 1; they are not used on the board and
- * accessing them causes endless "too much work in irq53" messages
- * with arago fs
- */
- __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
- __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
-
- ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
- if (ret)
- pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret);
-
- da850_evm_snd_data.sram_pool = sram_get_gen_pool();
- da8xx_register_mcasp(0, &da850_evm_snd_data);
-
- ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
- if (ret)
- pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret);
-
- ret = da8xx_register_uio_pruss();
- if (ret)
- pr_warn("da850_evm_init: pruss initialization failed: %d\n",
- ret);
-
- /* Handle board specific muxing for LCD here */
- ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
- if (ret)
- pr_warn("%s: EVM specific LCD mux setup failed: %d\n",
- __func__, ret);
-
- ret = da850_lcd_hw_init();
- if (ret)
- pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
-
- ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
- if (ret)
- pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
-
- ret = da8xx_register_rtc();
- if (ret)
- pr_warn("%s: RTC setup failed: %d\n", __func__, ret);
-
- ret = da850_evm_init_cpufreq();
- if (ret)
- pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret);
-
- ret = da8xx_register_cpuidle();
- if (ret)
- pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
-
- davinci_pm_init();
- da850_vpif_init();
-
- ret = spi_register_board_info(da850evm_spi_info,
- ARRAY_SIZE(da850evm_spi_info));
- if (ret)
- pr_warn("%s: spi info registration failed: %d\n", __func__,
- ret);
-
- ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info));
- if (ret)
- pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret);
-
- ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
- if (ret)
- pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
-
- ret = da8xx_register_rproc();
- if (ret)
- pr_warn("%s: dsp/rproc registration failed: %d\n",
- __func__, ret);
-
- regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da850_evm_console_init(void)
-{
- if (!machine_is_davinci_da850_evm())
- return 0;
-
- return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da850_evm_console_init);
-#endif
-
-static void __init da850_evm_map_io(void)
-{
- da850_init();
-}
-
-MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
- .atag_offset = 0x100,
- .map_io = da850_evm_map_io,
- .init_irq = da850_init_irq,
- .init_time = da850_init_time,
- .init_machine = da850_evm_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
- .reserve = da8xx_rproc_reserve_cma,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
deleted file mode 100644
index b48ab1c3e48b..000000000000
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ /dev/null
@@ -1,444 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) MontaVista Software, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/clk.h>
-#include <linux/dm9000.h>
-#include <linux/videodev2.h>
-#include <media/i2c/tvp514x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "serial.h"
-#include "common.h"
-#include "davinci.h"
-
-/* NOTE: this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
- {
- /* UBL (a few copies) plus U-Boot */
- .name = "bootloader",
- .offset = 0,
- .size = 15 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- /* U-Boot environment */
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = 1 * NAND_BLOCK_SIZE,
- .mask_flags = 0,
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- .mask_flags = 0,
- }, {
- .name = "filesystem1",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_512M,
- .mask_flags = 0,
- }, {
- .name = "filesystem2",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- }
- /* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
- .core_chipsel = 0,
- .mask_chipsel = BIT(14),
- .parts = davinci_nand_partitions,
- .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
- .bbt_options = NAND_BBT_USE_FLASH,
- .ecc_bits = 4,
-};
-
-static struct resource davinci_nand_resources[] = {
- {
- .start = DM355_ASYNC_EMIF_DATA_CE0_BASE,
- .end = DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = DM355_ASYNC_EMIF_CONTROL_BASE,
- .end = DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device davinci_nand_device = {
- .name = "davinci_nand",
- .id = 0,
-
- .num_resources = ARRAY_SIZE(davinci_nand_resources),
- .resource = davinci_nand_resources,
-
- .dev = {
- .platform_data = &davinci_nand_data,
- },
-};
-
-#define DM355_I2C_SDA_PIN GPIO_TO_PIN(0, 15)
-#define DM355_I2C_SCL_PIN GPIO_TO_PIN(0, 14)
-
-static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
- .dev_id = "i2c_davinci.1",
- .table = {
- GPIO_LOOKUP("davinci_gpio", DM355_I2C_SDA_PIN, "sda",
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- { }
- },
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
- .bus_freq = 400 /* kHz */,
- .bus_delay = 0 /* usec */,
- .gpio_recovery = true,
-};
-
-static int dm355evm_mmc_gpios = -EINVAL;
-
-static void dm355evm_mmcsd_gpios(unsigned gpio)
-{
- gpio_request(gpio + 0, "mmc0_ro");
- gpio_request(gpio + 1, "mmc0_cd");
- gpio_request(gpio + 2, "mmc1_ro");
- gpio_request(gpio + 3, "mmc1_cd");
-
- /* we "know" these are input-only so we don't
- * need to call gpio_direction_input()
- */
-
- dm355evm_mmc_gpios = gpio;
-}
-
-static struct i2c_board_info dm355evm_i2c_info[] = {
- { I2C_BOARD_INFO("dm355evm_msp", 0x25),
- .platform_data = dm355evm_mmcsd_gpios,
- },
- /* { plus irq }, */
- { I2C_BOARD_INFO("tlv320aic33", 0x1b), },
-};
-
-static void __init evm_init_i2c(void)
-{
- gpiod_add_lookup_table(&i2c_recovery_gpiod_table);
- davinci_init_i2c(&i2c_pdata);
-
- gpio_request(5, "dm355evm_msp");
- gpio_direction_input(5);
- dm355evm_i2c_info[0].irq = gpio_to_irq(5);
-
- i2c_register_board_info(1, dm355evm_i2c_info,
- ARRAY_SIZE(dm355evm_i2c_info));
-}
-
-static struct resource dm355evm_dm9000_rsrc[] = {
- {
- /* addr */
- .start = 0x04014000,
- .end = 0x04014001,
- .flags = IORESOURCE_MEM,
- }, {
- /* data */
- .start = 0x04014002,
- .end = 0x04014003,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ
- | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
- },
-};
-
-static struct dm9000_plat_data dm335evm_dm9000_platdata;
-
-static struct platform_device dm355evm_dm9000 = {
- .name = "dm9000",
- .id = -1,
- .resource = dm355evm_dm9000_rsrc,
- .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc),
- .dev = {
- .platform_data = &dm335evm_dm9000_platdata,
- },
-};
-
-static struct tvp514x_platform_data tvp5146_pdata = {
- .clk_polarity = 0,
- .hs_polarity = 1,
- .vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
- {
- .index = 0,
- .name = "Composite",
- .type = V4L2_INPUT_TYPE_CAMERA,
- .std = TVP514X_STD_ALL,
- },
- {
- .index = 1,
- .name = "S-Video",
- .type = V4L2_INPUT_TYPE_CAMERA,
- .std = TVP514X_STD_ALL,
- },
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
- {
- .input = INPUT_CVBS_VI2B,
- .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
- },
- {
- .input = INPUT_SVIDEO_VI2C_VI1C,
- .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
- },
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
- {
- .name = "tvp5146",
- .grp_id = 0,
- .num_inputs = ARRAY_SIZE(tvp5146_inputs),
- .inputs = tvp5146_inputs,
- .routes = tvp5146_routes,
- .can_route = 1,
- .ccdc_if_params = {
- .if_type = VPFE_BT656,
- .hdpol = VPFE_PINPOL_POSITIVE,
- .vdpol = VPFE_PINPOL_POSITIVE,
- },
- .board_info = {
- I2C_BOARD_INFO("tvp5146", 0x5d),
- .platform_data = &tvp5146_pdata,
- },
- }
-};
-
-static struct vpfe_config vpfe_cfg = {
- .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
- .i2c_adapter_id = 1,
- .sub_devs = vpfe_sub_devs,
- .card_name = "DM355 EVM",
- .ccdc = "DM355 CCDC",
-};
-
-/* venc standards timings */
-static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
- {
- .name = "ntsc",
- .timings_type = VPBE_ENC_STD,
- .std_id = V4L2_STD_NTSC,
- .interlaced = 1,
- .xres = 720,
- .yres = 480,
- .aspect = {11, 10},
- .fps = {30000, 1001},
- .left_margin = 0x79,
- .upper_margin = 0x10,
- },
- {
- .name = "pal",
- .timings_type = VPBE_ENC_STD,
- .std_id = V4L2_STD_PAL,
- .interlaced = 1,
- .xres = 720,
- .yres = 576,
- .aspect = {54, 59},
- .fps = {25, 1},
- .left_margin = 0x7E,
- .upper_margin = 0x16
- },
-};
-
-#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/*
- * The outputs available from VPBE + ecnoders. Keep the
- * the order same as that of encoders. First those from venc followed by that
- * from encoders. Index in the output refers to index on a particular encoder.
- * Driver uses this index to pass it to encoder when it supports more than
- * one output. Application uses index of the array to set an output.
- */
-static struct vpbe_output dm355evm_vpbe_outputs[] = {
- {
- .output = {
- .index = 0,
- .name = "Composite",
- .type = V4L2_OUTPUT_TYPE_ANALOG,
- .std = VENC_STD_ALL,
- .capabilities = V4L2_OUT_CAP_STD,
- },
- .subdev_name = DM355_VPBE_VENC_SUBDEV_NAME,
- .default_mode = "ntsc",
- .num_modes = ARRAY_SIZE(dm355evm_enc_preset_timing),
- .modes = dm355evm_enc_preset_timing,
- .if_params = MEDIA_BUS_FMT_FIXED,
- },
-};
-
-static struct vpbe_config dm355evm_display_cfg = {
- .module_name = "dm355-vpbe-display",
- .i2c_adapter_id = 1,
- .osd = {
- .module_name = DM355_VPBE_OSD_SUBDEV_NAME,
- },
- .venc = {
- .module_name = DM355_VPBE_VENC_SUBDEV_NAME,
- },
- .num_outputs = ARRAY_SIZE(dm355evm_vpbe_outputs),
- .outputs = dm355evm_vpbe_outputs,
-};
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
- &dm355evm_dm9000,
- &davinci_nand_device,
-};
-
-static void __init dm355_evm_map_io(void)
-{
- dm355_init();
-}
-
-static int dm355evm_mmc_get_cd(int module)
-{
- if (!gpio_is_valid(dm355evm_mmc_gpios))
- return -ENXIO;
- /* low == card present */
- return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
-}
-
-static int dm355evm_mmc_get_ro(int module)
-{
- if (!gpio_is_valid(dm355evm_mmc_gpios))
- return -ENXIO;
- /* high == card's write protect switch active */
- return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355evm_mmc_config = {
- .get_cd = dm355evm_mmc_get_cd,
- .get_ro = dm355evm_mmc_get_ro,
- .wires = 4,
- .max_freq = 50000000,
- .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender. If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#define USB_ID_VALUE 1 /* ID pulled low */
-
-static struct spi_eeprom at25640a = {
- .byte_len = SZ_64K / 8,
- .name = "at25640a",
- .page_size = 32,
- .flags = EE_ADDR2,
-};
-
-static const struct spi_board_info dm355_evm_spi_info[] __initconst = {
- {
- .modalias = "at25",
- .platform_data = &at25640a,
- .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- },
-};
-
-static __init void dm355_evm_init(void)
-{
- struct clk *aemif;
- int ret;
-
- dm355_register_clocks();
-
- ret = dm355_gpio_register();
- if (ret)
- pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
- gpio_request(1, "dm9000");
- gpio_direction_input(1);
- dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
-
- aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
- if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
- clk_prepare_enable(aemif);
-
- platform_add_devices(davinci_evm_devices,
- ARRAY_SIZE(davinci_evm_devices));
- evm_init_i2c();
- davinci_serial_init(dm355_serial_device);
-
- /* NOTE: NAND flash timings set by the UBL are slower than
- * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
- * but could be 0x0400008c for about 25% faster page reads.
- */
-
- gpio_request(2, "usb_id_toggle");
- gpio_direction_output(2, USB_ID_VALUE);
- /* irlml6401 switches over 1A in under 8 msec */
- davinci_setup_usb(1000, 8);
-
- davinci_setup_mmc(0, &dm355evm_mmc_config);
- davinci_setup_mmc(1, &dm355evm_mmc_config);
-
- dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg);
-
- dm355_init_spi0(BIT(0), dm355_evm_spi_info,
- ARRAY_SIZE(dm355_evm_spi_info));
-
- /* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
- dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN);
-}
-
-MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
- .atag_offset = 0x100,
- .map_io = dm355_evm_map_io,
- .init_irq = dm355_init_irq,
- .init_time = dm355_init_time,
- .init_machine = dm355_evm_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
deleted file mode 100644
index 32b9d607d025..000000000000
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * DM355 leopard board support
- *
- * Based on board-dm355-evm.c
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "serial.h"
-#include "davinci.h"
-
-/* NOTE: this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
- {
- /* UBL (a few copies) plus U-Boot */
- .name = "bootloader",
- .offset = 0,
- .size = 15 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- /* U-Boot environment */
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = 1 * NAND_BLOCK_SIZE,
- .mask_flags = 0,
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- .mask_flags = 0,
- }, {
- .name = "filesystem1",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_512M,
- .mask_flags = 0,
- }, {
- .name = "filesystem2",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- }
- /* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
- .core_chipsel = 0,
- .mask_chipsel = BIT(14),
- .parts = davinci_nand_partitions,
- .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
- .ecc_placement = NAND_ECC_PLACEMENT_INTERLEAVED,
- .ecc_bits = 4,
- .bbt_options = NAND_BBT_USE_FLASH,
-};
-
-static struct resource davinci_nand_resources[] = {
- {
- .start = DM355_ASYNC_EMIF_DATA_CE0_BASE,
- .end = DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = DM355_ASYNC_EMIF_CONTROL_BASE,
- .end = DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device davinci_nand_device = {
- .name = "davinci_nand",
- .id = 0,
-
- .num_resources = ARRAY_SIZE(davinci_nand_resources),
- .resource = davinci_nand_resources,
-
- .dev = {
- .platform_data = &davinci_nand_data,
- },
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
- .bus_freq = 400 /* kHz */,
- .bus_delay = 0 /* usec */,
-};
-
-static int leopard_mmc_gpio = -EINVAL;
-
-static void dm355leopard_mmcsd_gpios(unsigned gpio)
-{
- gpio_request(gpio + 0, "mmc0_ro");
- gpio_request(gpio + 1, "mmc0_cd");
- gpio_request(gpio + 2, "mmc1_ro");
- gpio_request(gpio + 3, "mmc1_cd");
-
- /* we "know" these are input-only so we don't
- * need to call gpio_direction_input()
- */
-
- leopard_mmc_gpio = gpio;
-}
-
-static struct i2c_board_info dm355leopard_i2c_info[] = {
- { I2C_BOARD_INFO("dm355leopard_msp", 0x25),
- .platform_data = dm355leopard_mmcsd_gpios,
- /* plus irq */ },
- /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
- /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
-};
-
-static void __init leopard_init_i2c(void)
-{
- davinci_init_i2c(&i2c_pdata);
-
- gpio_request(5, "dm355leopard_msp");
- gpio_direction_input(5);
- dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
-
- i2c_register_board_info(1, dm355leopard_i2c_info,
- ARRAY_SIZE(dm355leopard_i2c_info));
-}
-
-static struct resource dm355leopard_dm9000_rsrc[] = {
- {
- /* addr */
- .start = 0x04000000,
- .end = 0x04000001,
- .flags = IORESOURCE_MEM,
- }, {
- /* data */
- .start = 0x04000016,
- .end = 0x04000017,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ
- | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
- },
-};
-
-static struct platform_device dm355leopard_dm9000 = {
- .name = "dm9000",
- .id = -1,
- .resource = dm355leopard_dm9000_rsrc,
- .num_resources = ARRAY_SIZE(dm355leopard_dm9000_rsrc),
-};
-
-static struct platform_device *davinci_leopard_devices[] __initdata = {
- &dm355leopard_dm9000,
- &davinci_nand_device,
-};
-
-static void __init dm355_leopard_map_io(void)
-{
- dm355_init();
-}
-
-static int dm355leopard_mmc_get_cd(int module)
-{
- if (!gpio_is_valid(leopard_mmc_gpio))
- return -ENXIO;
- /* low == card present */
- return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
-}
-
-static int dm355leopard_mmc_get_ro(int module)
-{
- if (!gpio_is_valid(leopard_mmc_gpio))
- return -ENXIO;
- /* high == card's write protect switch active */
- return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355leopard_mmc_config = {
- .get_cd = dm355leopard_mmc_get_cd,
- .get_ro = dm355leopard_mmc_get_ro,
- .wires = 4,
- .max_freq = 50000000,
- .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender. If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#define USB_ID_VALUE 1 /* ID pulled low */
-
-static struct spi_eeprom at25640a = {
- .byte_len = SZ_64K / 8,
- .name = "at25640a",
- .page_size = 32,
- .flags = EE_ADDR2,
-};
-
-static const struct spi_board_info dm355_leopard_spi_info[] __initconst = {
- {
- .modalias = "at25",
- .platform_data = &at25640a,
- .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- },
-};
-
-static __init void dm355_leopard_init(void)
-{
- struct clk *aemif;
- int ret;
-
- dm355_register_clocks();
-
- ret = dm355_gpio_register();
- if (ret)
- pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
- gpio_request(9, "dm9000");
- gpio_direction_input(9);
- dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
-
- aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
- if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
- clk_prepare_enable(aemif);
-
- platform_add_devices(davinci_leopard_devices,
- ARRAY_SIZE(davinci_leopard_devices));
- leopard_init_i2c();
- davinci_serial_init(dm355_serial_device);
-
- /* NOTE: NAND flash timings set by the UBL are slower than
- * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
- * but could be 0x0400008c for about 25% faster page reads.
- */
-
- gpio_request(2, "usb_id_toggle");
- gpio_direction_output(2, USB_ID_VALUE);
- /* irlml6401 switches over 1A in under 8 msec */
- davinci_setup_usb(1000, 8);
-
- davinci_setup_mmc(0, &dm355leopard_mmc_config);
- davinci_setup_mmc(1, &dm355leopard_mmc_config);
-
- dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
- ARRAY_SIZE(dm355_leopard_spi_info));
-}
-
-MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
- .atag_offset = 0x100,
- .map_io = dm355_leopard_map_io,
- .init_irq = dm355_init_irq,
- .init_time = dm355_init_time,
- .init_machine = dm355_leopard_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
deleted file mode 100644
index d8c6c360818b..000000000000
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ /dev/null
@@ -1,855 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM365 EVM board support
- *
- * Copyright (C) 2009 Texas Instruments Incorporated
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/property.h>
-#include <linux/leds.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/slab.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/nvmem-provider.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/v4l2-dv-timings.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/keyscan-davinci.h>
-
-#include <media/i2c/ths7303.h>
-#include <media/i2c/tvp514x.h>
-
-#include "mux.h"
-#include "common.h"
-#include "serial.h"
-#include "davinci.h"
-
-static inline int have_imager(void)
-{
- /* REVISIT when it's supported, trigger via Kconfig */
- return 0;
-}
-
-static inline int have_tvp7002(void)
-{
- /* REVISIT when it's supported, trigger via Kconfig */
- return 0;
-}
-
-#define DM365_EVM_PHY_ID "davinci_mdio-0:01"
-/*
- * A MAX-II CPLD is used for various board control functions.
- */
-#define CPLD_OFFSET(a13a8,a2a1) (((a13a8) << 10) + ((a2a1) << 3))
-
-#define CPLD_VERSION CPLD_OFFSET(0,0) /* r/o */
-#define CPLD_TEST CPLD_OFFSET(0,1)
-#define CPLD_LEDS CPLD_OFFSET(0,2)
-#define CPLD_MUX CPLD_OFFSET(0,3)
-#define CPLD_SWITCH CPLD_OFFSET(1,0) /* r/o */
-#define CPLD_POWER CPLD_OFFSET(1,1)
-#define CPLD_VIDEO CPLD_OFFSET(1,2)
-#define CPLD_CARDSTAT CPLD_OFFSET(1,3) /* r/o */
-
-#define CPLD_DILC_OUT CPLD_OFFSET(2,0)
-#define CPLD_DILC_IN CPLD_OFFSET(2,1) /* r/o */
-
-#define CPLD_IMG_DIR0 CPLD_OFFSET(2,2)
-#define CPLD_IMG_MUX0 CPLD_OFFSET(2,3)
-#define CPLD_IMG_MUX1 CPLD_OFFSET(3,0)
-#define CPLD_IMG_DIR1 CPLD_OFFSET(3,1)
-#define CPLD_IMG_MUX2 CPLD_OFFSET(3,2)
-#define CPLD_IMG_MUX3 CPLD_OFFSET(3,3)
-#define CPLD_IMG_DIR2 CPLD_OFFSET(4,0)
-#define CPLD_IMG_MUX4 CPLD_OFFSET(4,1)
-#define CPLD_IMG_MUX5 CPLD_OFFSET(4,2)
-
-#define CPLD_RESETS CPLD_OFFSET(4,3)
-
-#define CPLD_CCD_DIR1 CPLD_OFFSET(0x3e,0)
-#define CPLD_CCD_IO1 CPLD_OFFSET(0x3e,1)
-#define CPLD_CCD_DIR2 CPLD_OFFSET(0x3e,2)
-#define CPLD_CCD_IO2 CPLD_OFFSET(0x3e,3)
-#define CPLD_CCD_DIR3 CPLD_OFFSET(0x3f,0)
-#define CPLD_CCD_IO3 CPLD_OFFSET(0x3f,1)
-
-static void __iomem *cpld;
-
-
-/* NOTE: this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
- * swap chips with a different block size, partitioning will
- * need to be changed. This NAND chip MT29F16G08FAA is the default
- * NAND shipped with the Spectrum Digital DM365 EVM
- */
-#define NAND_BLOCK_SIZE SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
- {
- /* UBL (a few copies) plus U-Boot */
- .name = "bootloader",
- .offset = 0,
- .size = 30 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- /* U-Boot environment */
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = 2 * NAND_BLOCK_SIZE,
- .mask_flags = 0,
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- .mask_flags = 0,
- }, {
- .name = "filesystem1",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_512M,
- .mask_flags = 0,
- }, {
- .name = "filesystem2",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- }
- /* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
- .core_chipsel = 0,
- .mask_chipsel = BIT(14),
- .parts = davinci_nand_partitions,
- .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
- .bbt_options = NAND_BBT_USE_FLASH,
- .ecc_bits = 4,
-};
-
-static struct resource davinci_nand_resources[] = {
- {
- .start = DM365_ASYNC_EMIF_DATA_CE0_BASE,
- .end = DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = DM365_ASYNC_EMIF_CONTROL_BASE,
- .end = DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device davinci_aemif_devices[] = {
- {
- .name = "davinci_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(davinci_nand_resources),
- .resource = davinci_nand_resources,
- .dev = {
- .platform_data = &davinci_nand_data,
- },
- }
-};
-
-static struct resource davinci_aemif_resources[] = {
- {
- .start = DM365_ASYNC_EMIF_CONTROL_BASE,
- .end = DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
- {
- .cs = 1,
- },
-};
-
-static struct aemif_platform_data davinci_aemif_pdata = {
- .abus_data = da850_evm_aemif_abus_data,
- .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data),
- .sub_devices = davinci_aemif_devices,
- .num_sub_devices = ARRAY_SIZE(davinci_aemif_devices),
-};
-
-static struct platform_device davinci_aemif_device = {
- .name = "ti-aemif",
- .id = -1,
- .dev = {
- .platform_data = &davinci_aemif_pdata,
- },
- .resource = davinci_aemif_resources,
- .num_resources = ARRAY_SIZE(davinci_aemif_resources),
-};
-
-static struct nvmem_cell_info davinci_nvmem_cells[] = {
- {
- .name = "macaddr",
- .offset = 0x7f00,
- .bytes = ETH_ALEN,
- }
-};
-
-static struct nvmem_cell_table davinci_nvmem_cell_table = {
- .nvmem_name = "1-00500",
- .cells = davinci_nvmem_cells,
- .ncells = ARRAY_SIZE(davinci_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = {
- .nvmem_name = "1-00500",
- .cell_name = "macaddr",
- .dev_id = "davinci_emac.1",
- .con_id = "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 64),
- { }
-};
-
-static const struct software_node eeprom_node = {
- .properties = eeprom_properties,
-};
-
-static struct i2c_board_info i2c_info[] = {
- {
- I2C_BOARD_INFO("24c256", 0x50),
- .swnode = &eeprom_node,
- },
- {
- I2C_BOARD_INFO("tlv320aic3x", 0x18),
- },
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
- .bus_freq = 400 /* kHz */,
- .bus_delay = 0 /* usec */,
-};
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
- /* Baseboard 3.3V: 5V -> TPS767D301 -> 3.3V */
- REGULATOR_SUPPLY("AVDD", "1-0018"),
- REGULATOR_SUPPLY("DRVDD", "1-0018"),
- REGULATOR_SUPPLY("IOVDD", "1-0018"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
- /* Baseboard 1.8V: 5V -> TPS767D301 -> 1.8V */
- REGULATOR_SUPPLY("DVDD", "1-0018"),
-};
-
-static int dm365evm_keyscan_enable(struct device *dev)
-{
- return davinci_cfg_reg(DM365_KEYSCAN);
-}
-
-static unsigned short dm365evm_keymap[] = {
- KEY_KP2,
- KEY_LEFT,
- KEY_EXIT,
- KEY_DOWN,
- KEY_ENTER,
- KEY_UP,
- KEY_KP1,
- KEY_RIGHT,
- KEY_MENU,
- KEY_RECORD,
- KEY_REWIND,
- KEY_KPMINUS,
- KEY_STOP,
- KEY_FASTFORWARD,
- KEY_KPPLUS,
- KEY_PLAYPAUSE,
- 0
-};
-
-static struct davinci_ks_platform_data dm365evm_ks_data = {
- .device_enable = dm365evm_keyscan_enable,
- .keymap = dm365evm_keymap,
- .keymapsize = ARRAY_SIZE(dm365evm_keymap),
- .rep = 1,
- /* Scan period = strobe + interval */
- .strobe = 0x5,
- .interval = 0x2,
- .matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4,
-};
-
-static int cpld_mmc_get_cd(int module)
-{
- if (!cpld)
- return -ENXIO;
-
- /* low == card present */
- return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
-}
-
-static int cpld_mmc_get_ro(int module)
-{
- if (!cpld)
- return -ENXIO;
-
- /* high == card's write protect switch active */
- return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
-}
-
-static struct davinci_mmc_config dm365evm_mmc_config = {
- .get_cd = cpld_mmc_get_cd,
- .get_ro = cpld_mmc_get_ro,
- .wires = 4,
- .max_freq = 50000000,
- .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static void dm365evm_emac_configure(void)
-{
- /*
- * EMAC pins are multiplexed with GPIO and UART
- * Further details are available at the DM365 ARM
- * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
- */
- davinci_cfg_reg(DM365_EMAC_TX_EN);
- davinci_cfg_reg(DM365_EMAC_TX_CLK);
- davinci_cfg_reg(DM365_EMAC_COL);
- davinci_cfg_reg(DM365_EMAC_TXD3);
- davinci_cfg_reg(DM365_EMAC_TXD2);
- davinci_cfg_reg(DM365_EMAC_TXD1);
- davinci_cfg_reg(DM365_EMAC_TXD0);
- davinci_cfg_reg(DM365_EMAC_RXD3);
- davinci_cfg_reg(DM365_EMAC_RXD2);
- davinci_cfg_reg(DM365_EMAC_RXD1);
- davinci_cfg_reg(DM365_EMAC_RXD0);
- davinci_cfg_reg(DM365_EMAC_RX_CLK);
- davinci_cfg_reg(DM365_EMAC_RX_DV);
- davinci_cfg_reg(DM365_EMAC_RX_ER);
- davinci_cfg_reg(DM365_EMAC_CRS);
- davinci_cfg_reg(DM365_EMAC_MDIO);
- davinci_cfg_reg(DM365_EMAC_MDCLK);
-
- /*
- * EMAC interrupts are multiplexed with GPIO interrupts
- * Details are available at the DM365 ARM
- * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
- */
- davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
- davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
- davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
- davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
-}
-
-static void dm365evm_mmc_configure(void)
-{
- /*
- * MMC/SD pins are multiplexed with GPIO and EMIF
- * Further details are available at the DM365 ARM
- * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
- */
- davinci_cfg_reg(DM365_SD1_CLK);
- davinci_cfg_reg(DM365_SD1_CMD);
- davinci_cfg_reg(DM365_SD1_DATA3);
- davinci_cfg_reg(DM365_SD1_DATA2);
- davinci_cfg_reg(DM365_SD1_DATA1);
- davinci_cfg_reg(DM365_SD1_DATA0);
-}
-
-static struct tvp514x_platform_data tvp5146_pdata = {
- .clk_polarity = 0,
- .hs_polarity = 1,
- .vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
- {
- .index = 0,
- .name = "Composite",
- .type = V4L2_INPUT_TYPE_CAMERA,
- .std = TVP514X_STD_ALL,
- },
- {
- .index = 1,
- .name = "S-Video",
- .type = V4L2_INPUT_TYPE_CAMERA,
- .std = TVP514X_STD_ALL,
- },
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
- {
- .input = INPUT_CVBS_VI2B,
- .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
- },
-{
- .input = INPUT_SVIDEO_VI2C_VI1C,
- .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
- },
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
- {
- .name = "tvp5146",
- .grp_id = 0,
- .num_inputs = ARRAY_SIZE(tvp5146_inputs),
- .inputs = tvp5146_inputs,
- .routes = tvp5146_routes,
- .can_route = 1,
- .ccdc_if_params = {
- .if_type = VPFE_BT656,
- .hdpol = VPFE_PINPOL_POSITIVE,
- .vdpol = VPFE_PINPOL_POSITIVE,
- },
- .board_info = {
- I2C_BOARD_INFO("tvp5146", 0x5d),
- .platform_data = &tvp5146_pdata,
- },
- },
-};
-
-static struct vpfe_config vpfe_cfg = {
- .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
- .sub_devs = vpfe_sub_devs,
- .i2c_adapter_id = 1,
- .card_name = "DM365 EVM",
- .ccdc = "ISIF",
-};
-
-/* venc standards timings */
-static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
- {
- .name = "ntsc",
- .timings_type = VPBE_ENC_STD,
- .std_id = V4L2_STD_NTSC,
- .interlaced = 1,
- .xres = 720,
- .yres = 480,
- .aspect = {11, 10},
- .fps = {30000, 1001},
- .left_margin = 0x79,
- .upper_margin = 0x10,
- },
- {
- .name = "pal",
- .timings_type = VPBE_ENC_STD,
- .std_id = V4L2_STD_PAL,
- .interlaced = 1,
- .xres = 720,
- .yres = 576,
- .aspect = {54, 59},
- .fps = {25, 1},
- .left_margin = 0x7E,
- .upper_margin = 0x16,
- },
-};
-
-/* venc dv timings */
-static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
- {
- .name = "480p59_94",
- .timings_type = VPBE_ENC_DV_TIMINGS,
- .dv_timings = V4L2_DV_BT_CEA_720X480P59_94,
- .interlaced = 0,
- .xres = 720,
- .yres = 480,
- .aspect = {1, 1},
- .fps = {5994, 100},
- .left_margin = 0x8F,
- .upper_margin = 0x2D,
- },
- {
- .name = "576p50",
- .timings_type = VPBE_ENC_DV_TIMINGS,
- .dv_timings = V4L2_DV_BT_CEA_720X576P50,
- .interlaced = 0,
- .xres = 720,
- .yres = 576,
- .aspect = {1, 1},
- .fps = {50, 1},
- .left_margin = 0x8C,
- .upper_margin = 0x36,
- },
- {
- .name = "720p60",
- .timings_type = VPBE_ENC_DV_TIMINGS,
- .dv_timings = V4L2_DV_BT_CEA_1280X720P60,
- .interlaced = 0,
- .xres = 1280,
- .yres = 720,
- .aspect = {1, 1},
- .fps = {60, 1},
- .left_margin = 0x117,
- .right_margin = 70,
- .upper_margin = 38,
- .lower_margin = 3,
- .hsync_len = 80,
- .vsync_len = 5,
- },
- {
- .name = "1080i60",
- .timings_type = VPBE_ENC_DV_TIMINGS,
- .dv_timings = V4L2_DV_BT_CEA_1920X1080I60,
- .interlaced = 1,
- .xres = 1920,
- .yres = 1080,
- .aspect = {1, 1},
- .fps = {30, 1},
- .left_margin = 0xc9,
- .right_margin = 80,
- .upper_margin = 30,
- .lower_margin = 3,
- .hsync_len = 88,
- .vsync_len = 5,
- },
-};
-
-#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/*
- * The outputs available from VPBE + ecnoders. Keep the
- * the order same as that of encoders. First those from venc followed by that
- * from encoders. Index in the output refers to index on a particular
- * encoder.Driver uses this index to pass it to encoder when it supports more
- * than one output. Application uses index of the array to set an output.
- */
-static struct vpbe_output dm365evm_vpbe_outputs[] = {
- {
- .output = {
- .index = 0,
- .name = "Composite",
- .type = V4L2_OUTPUT_TYPE_ANALOG,
- .std = VENC_STD_ALL,
- .capabilities = V4L2_OUT_CAP_STD,
- },
- .subdev_name = DM365_VPBE_VENC_SUBDEV_NAME,
- .default_mode = "ntsc",
- .num_modes = ARRAY_SIZE(dm365evm_enc_std_timing),
- .modes = dm365evm_enc_std_timing,
- .if_params = MEDIA_BUS_FMT_FIXED,
- },
- {
- .output = {
- .index = 1,
- .name = "Component",
- .type = V4L2_OUTPUT_TYPE_ANALOG,
- .capabilities = V4L2_OUT_CAP_DV_TIMINGS,
- },
- .subdev_name = DM365_VPBE_VENC_SUBDEV_NAME,
- .default_mode = "480p59_94",
- .num_modes = ARRAY_SIZE(dm365evm_enc_preset_timing),
- .modes = dm365evm_enc_preset_timing,
- .if_params = MEDIA_BUS_FMT_FIXED,
- },
-};
-
-/*
- * Amplifiers on the board
- */
-static struct ths7303_platform_data ths7303_pdata = {
- .ch_1 = 3,
- .ch_2 = 3,
- .ch_3 = 3,
-};
-
-static struct amp_config_info vpbe_amp = {
- .module_name = "ths7303",
- .is_i2c = 1,
- .board_info = {
- I2C_BOARD_INFO("ths7303", 0x2c),
- .platform_data = &ths7303_pdata,
- }
-};
-
-static struct vpbe_config dm365evm_display_cfg = {
- .module_name = "dm365-vpbe-display",
- .i2c_adapter_id = 1,
- .amp = &vpbe_amp,
- .osd = {
- .module_name = DM365_VPBE_OSD_SUBDEV_NAME,
- },
- .venc = {
- .module_name = DM365_VPBE_VENC_SUBDEV_NAME,
- },
- .num_outputs = ARRAY_SIZE(dm365evm_vpbe_outputs),
- .outputs = dm365evm_vpbe_outputs,
-};
-
-static void __init evm_init_i2c(void)
-{
- davinci_init_i2c(&i2c_pdata);
- i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static inline int have_leds(void)
-{
-#ifdef CONFIG_LEDS_CLASS
- return 1;
-#else
- return 0;
-#endif
-}
-
-struct cpld_led {
- struct led_classdev cdev;
- u8 mask;
-};
-
-static const struct {
- const char *name;
- const char *trigger;
-} cpld_leds[] = {
- { "dm365evm::ds2", },
- { "dm365evm::ds3", },
- { "dm365evm::ds4", },
- { "dm365evm::ds5", },
- { "dm365evm::ds6", "nand-disk", },
- { "dm365evm::ds7", "mmc1", },
- { "dm365evm::ds8", "mmc0", },
- { "dm365evm::ds9", "heartbeat", },
-};
-
-static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
-{
- struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
- u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
- if (b != LED_OFF)
- reg &= ~led->mask;
- else
- reg |= led->mask;
- __raw_writeb(reg, cpld + CPLD_LEDS);
-}
-
-static enum led_brightness cpld_led_get(struct led_classdev *cdev)
-{
- struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
- u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
- return (reg & led->mask) ? LED_OFF : LED_FULL;
-}
-
-static int __init cpld_leds_init(void)
-{
- int i;
-
- if (!have_leds() || !cpld)
- return 0;
-
- /* setup LEDs */
- __raw_writeb(0xff, cpld + CPLD_LEDS);
- for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
- struct cpld_led *led;
-
- led = kzalloc(sizeof(*led), GFP_KERNEL);
- if (!led)
- break;
-
- led->cdev.name = cpld_leds[i].name;
- led->cdev.brightness_set = cpld_led_set;
- led->cdev.brightness_get = cpld_led_get;
- led->cdev.default_trigger = cpld_leds[i].trigger;
- led->mask = BIT(i);
-
- if (led_classdev_register(NULL, &led->cdev) < 0) {
- kfree(led);
- break;
- }
- }
-
- return 0;
-}
-/* run after subsys_initcall() for LEDs */
-fs_initcall(cpld_leds_init);
-
-
-static void __init evm_init_cpld(void)
-{
- u8 mux, resets;
- const char *label;
- struct clk *aemif_clk;
- int rc;
-
- /* Make sure we can configure the CPLD through CS1. Then
- * leave it on for later access to MMC and LED registers.
- */
- aemif_clk = clk_get(NULL, "aemif");
- if (IS_ERR(aemif_clk))
- return;
- clk_prepare_enable(aemif_clk);
-
- if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
- "cpld") == NULL)
- goto fail;
- cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
- if (!cpld) {
- release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
- SECTION_SIZE);
-fail:
- pr_err("ERROR: can't map CPLD\n");
- clk_disable_unprepare(aemif_clk);
- return;
- }
-
- /* External muxing for some signals */
- mux = 0;
-
- /* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
- * NOTE: SW4 bus width setting must match!
- */
- if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
- /* external keypad mux */
- mux |= BIT(7);
-
- rc = platform_device_register(&davinci_aemif_device);
- if (rc)
- pr_warn("%s(): error registering the aemif device: %d\n",
- __func__, rc);
- } else {
- /* no OneNAND support yet */
- }
-
- /* Leave external chips in reset when unused. */
- resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
-
- /* Static video input config with SN74CBT16214 1-of-3 mux:
- * - port b1 == tvp7002 (mux lowbits == 1 or 6)
- * - port b2 == imager (mux lowbits == 2 or 7)
- * - port b3 == tvp5146 (mux lowbits == 5)
- *
- * Runtime switching could work too, with limitations.
- */
- if (have_imager()) {
- label = "HD imager";
- mux |= 2;
-
- /* externally mux MMC1/ENET/AIC33 to imager */
- mux |= BIT(6) | BIT(5) | BIT(3);
- } else {
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- /* we can use MMC1 ... */
- dm365evm_mmc_configure();
- davinci_setup_mmc(1, &dm365evm_mmc_config);
-
- /* ... and ENET ... */
- dm365evm_emac_configure();
- soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID;
- resets &= ~BIT(3);
-
- /* ... and AIC33 */
- resets &= ~BIT(1);
-
- if (have_tvp7002()) {
- mux |= 1;
- resets &= ~BIT(2);
- label = "tvp7002 HD";
- } else {
- /* default to tvp5146 */
- mux |= 5;
- resets &= ~BIT(0);
- label = "tvp5146 SD";
- }
- }
- __raw_writeb(mux, cpld + CPLD_MUX);
- __raw_writeb(resets, cpld + CPLD_RESETS);
- pr_info("EVM: %s video input\n", label);
-
- /* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
-}
-
-static void __init dm365_evm_map_io(void)
-{
- dm365_init();
-}
-
-static struct spi_eeprom at25640 = {
- .byte_len = SZ_64K / 8,
- .name = "at25640",
- .page_size = 32,
- .flags = EE_ADDR2,
-};
-
-static const struct spi_board_info dm365_evm_spi_info[] __initconst = {
- {
- .modalias = "at25",
- .platform_data = &at25640,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- },
-};
-
-static __init void dm365_evm_init(void)
-{
- int ret;
-
- dm365_register_clocks();
-
- ret = dm365_gpio_register();
- if (ret)
- pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
- regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
- ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
- regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
- ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
-
- nvmem_add_cell_table(&davinci_nvmem_cell_table);
- nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1);
-
- evm_init_i2c();
- davinci_serial_init(dm365_serial_device);
-
- dm365evm_emac_configure();
- dm365evm_mmc_configure();
-
- davinci_setup_mmc(0, &dm365evm_mmc_config);
-
- dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg);
-
- /* maybe setup mmc1/etc ... _after_ mmc0 */
- evm_init_cpld();
-
-#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC
- dm365_init_asp();
-#elif defined(CONFIG_SND_SOC_DM365_VOICE_CODEC)
- dm365_init_vc();
-#endif
- dm365_init_rtc();
- dm365_init_ks(&dm365evm_ks_data);
-
- dm365_init_spi0(BIT(0), dm365_evm_spi_info,
- ARRAY_SIZE(dm365_evm_spi_info));
-}
-
-MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
- .atag_offset = 0x100,
- .map_io = dm365_evm_map_io,
- .init_irq = dm365_init_irq,
- .init_time = dm365_init_time,
- .init_machine = dm365_evm_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
deleted file mode 100644
index a46e7b9ff8e0..000000000000
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ /dev/null
@@ -1,638 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Critical Link MityOMAP-L138 SoM
- *
- * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com
- */
-
-#define pr_fmt(fmt) "MityOMAPL138: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-#include <linux/mtd/partitions.h>
-#include <linux/notifier.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/nvmem-provider.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c.h>
-#include <linux/etherdevice.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-
-#define MITYOMAPL138_PHY_ID ""
-
-#define FACTORY_CONFIG_MAGIC 0x012C0138
-#define FACTORY_CONFIG_VERSION 0x00010001
-
-/* Data Held in On-Board I2C device */
-struct factory_config {
- u32 magic;
- u32 version;
- u8 mac[6];
- u32 fpga_type;
- u32 spare;
- u32 serialnumber;
- char partnum[32];
-};
-
-static struct factory_config factory_config;
-
-#ifdef CONFIG_CPU_FREQ
-struct part_no_info {
- const char *part_no; /* part number string of interest */
- int max_freq; /* khz */
-};
-
-static struct part_no_info mityomapl138_pn_info[] = {
- {
- .part_no = "L138-C",
- .max_freq = 300000,
- },
- {
- .part_no = "L138-D",
- .max_freq = 375000,
- },
- {
- .part_no = "L138-F",
- .max_freq = 456000,
- },
- {
- .part_no = "1808-C",
- .max_freq = 300000,
- },
- {
- .part_no = "1808-D",
- .max_freq = 375000,
- },
- {
- .part_no = "1808-F",
- .max_freq = 456000,
- },
- {
- .part_no = "1810-D",
- .max_freq = 375000,
- },
-};
-
-static void mityomapl138_cpufreq_init(const char *partnum)
-{
- int i, ret;
-
- for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) {
- /*
- * the part number has additional characters beyond what is
- * stored in the table. This information is not needed for
- * determining the speed grade, and would require several
- * more table entries. Only check the first N characters
- * for a match.
- */
- if (!strncmp(partnum, mityomapl138_pn_info[i].part_no,
- strlen(mityomapl138_pn_info[i].part_no))) {
- da850_max_speed = mityomapl138_pn_info[i].max_freq;
- break;
- }
- }
-
- ret = da850_register_cpufreq("pll0_sysclk3");
- if (ret)
- pr_warn("cpufreq registration failed: %d\n", ret);
-}
-#else
-static void mityomapl138_cpufreq_init(const char *partnum) { }
-#endif
-
-static int read_factory_config(struct notifier_block *nb,
- unsigned long event, void *data)
-{
- int ret;
- const char *partnum = NULL;
- struct nvmem_device *nvmem = data;
-
- if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0)
- return NOTIFY_DONE;
-
- if (!IS_BUILTIN(CONFIG_NVMEM)) {
- pr_warn("Factory Config not available without CONFIG_NVMEM\n");
- goto bad_config;
- }
-
- ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
- &factory_config);
- if (ret != sizeof(struct factory_config)) {
- pr_warn("Read Factory Config Failed: %d\n", ret);
- goto bad_config;
- }
-
- if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
- pr_warn("Factory Config Magic Wrong (%X)\n",
- factory_config.magic);
- goto bad_config;
- }
-
- if (factory_config.version != FACTORY_CONFIG_VERSION) {
- pr_warn("Factory Config Version Wrong (%X)\n",
- factory_config.version);
- goto bad_config;
- }
-
- partnum = factory_config.partnum;
- pr_info("Part Number = %s\n", partnum);
-
-bad_config:
- /* default maximum speed is valid for all platforms */
- mityomapl138_cpufreq_init(partnum);
-
- return NOTIFY_STOP;
-}
-
-static struct notifier_block mityomapl138_nvmem_notifier = {
- .notifier_call = read_factory_config,
-};
-
-/*
- * We don't define a cell for factory config as it will be accessed from the
- * board file using the nvmem notifier chain.
- */
-static struct nvmem_cell_info mityomapl138_nvmem_cells[] = {
- {
- .name = "macaddr",
- .offset = 0x64,
- .bytes = ETH_ALEN,
- }
-};
-
-static struct nvmem_cell_table mityomapl138_nvmem_cell_table = {
- .nvmem_name = "1-00500",
- .cells = mityomapl138_nvmem_cells,
- .ncells = ARRAY_SIZE(mityomapl138_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
- .nvmem_name = "1-00500",
- .cell_name = "macaddr",
- .dev_id = "davinci_emac.1",
- .con_id = "mac-address",
-};
-
-static const struct property_entry mityomapl138_fd_chip_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 8),
- PROPERTY_ENTRY_BOOL("read-only"),
- { }
-};
-
-static const struct software_node mityomapl138_fd_chip_node = {
- .properties = mityomapl138_fd_chip_properties,
-};
-
-static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
- .bus_freq = 100, /* kHz */
- .bus_delay = 0, /* usec */
-};
-
-/* TPS65023 voltage regulator support */
-/* 1.2V Core */
-static struct regulator_consumer_supply tps65023_dcdc1_consumers[] = {
- {
- .supply = "cvdd",
- },
-};
-
-/* 1.8V */
-static struct regulator_consumer_supply tps65023_dcdc2_consumers[] = {
- {
- .supply = "usb0_vdda18",
- },
- {
- .supply = "usb1_vdda18",
- },
- {
- .supply = "ddr_dvdd18",
- },
- {
- .supply = "sata_vddr",
- },
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65023_dcdc3_consumers[] = {
- {
- .supply = "sata_vdd",
- },
- {
- .supply = "usb_cvdd",
- },
- {
- .supply = "pll0_vdda",
- },
- {
- .supply = "pll1_vdda",
- },
-};
-
-/* 1.8V Aux LDO, not used */
-static struct regulator_consumer_supply tps65023_ldo1_consumers[] = {
- {
- .supply = "1.8v_aux",
- },
-};
-
-/* FPGA VCC Aux (2.5 or 3.3) LDO */
-static struct regulator_consumer_supply tps65023_ldo2_consumers[] = {
- {
- .supply = "vccaux",
- },
-};
-
-static struct regulator_init_data tps65023_regulator_data[] = {
- /* dcdc1 */
- {
- .constraints = {
- .min_uV = 1150000,
- .max_uV = 1350000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers),
- .consumer_supplies = tps65023_dcdc1_consumers,
- },
- /* dcdc2 */
- {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers),
- .consumer_supplies = tps65023_dcdc2_consumers,
- },
- /* dcdc3 */
- {
- .constraints = {
- .min_uV = 1200000,
- .max_uV = 1200000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers),
- .consumer_supplies = tps65023_dcdc3_consumers,
- },
- /* ldo1 */
- {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers),
- .consumer_supplies = tps65023_ldo1_consumers,
- },
- /* ldo2 */
- {
- .constraints = {
- .min_uV = 2500000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers),
- .consumer_supplies = tps65023_ldo2_consumers,
- },
-};
-
-static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
- {
- I2C_BOARD_INFO("tps65023", 0x48),
- .platform_data = &tps65023_regulator_data[0],
- },
- {
- I2C_BOARD_INFO("24c02", 0x50),
- .swnode = &mityomapl138_fd_chip_node,
- },
-};
-
-static int __init pmic_tps65023_init(void)
-{
- return i2c_register_board_info(1, mityomap_tps65023_info,
- ARRAY_SIZE(mityomap_tps65023_info));
-}
-
-/*
- * SPI Devices:
- * SPI1_CS0: 8M Flash ST-M25P64-VME6G
- */
-static struct mtd_partition spi_flash_partitions[] = {
- [0] = {
- .name = "ubl",
- .offset = 0,
- .size = SZ_64K,
- .mask_flags = MTD_WRITEABLE,
- },
- [1] = {
- .name = "u-boot",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE,
- },
- [2] = {
- .name = "u-boot-env",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- .mask_flags = MTD_WRITEABLE,
- },
- [3] = {
- .name = "periph-config",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- .mask_flags = MTD_WRITEABLE,
- },
- [4] = {
- .name = "reserved",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K + SZ_64K,
- },
- [5] = {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M + SZ_1M,
- },
- [6] = {
- .name = "fpga",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- },
- [7] = {
- .name = "spare",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct flash_platform_data mityomapl138_spi_flash_data = {
- .name = "m25p80",
- .parts = spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(spi_flash_partitions),
- .type = "m24p64",
-};
-
-static struct davinci_spi_config spi_eprom_config = {
- .io_type = SPI_IO_TYPE_DMA,
- .c2tdelay = 8,
- .t2cdelay = 8,
-};
-
-static struct spi_board_info mityomapl138_spi_flash_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &mityomapl138_spi_flash_data,
- .controller_data = &spi_eprom_config,
- .mode = SPI_MODE_0,
- .max_speed_hz = 30000000,
- .bus_num = 1,
- .chip_select = 0,
- },
-};
-
-/*
- * MityDSP-L138 includes a 256 MByte large-page NAND flash
- * (128K blocks).
- */
-static struct mtd_partition mityomapl138_nandflash_partition[] = {
- {
- .name = "rootfs",
- .offset = 0,
- .size = SZ_128M,
- .mask_flags = 0, /* MTD_WRITEABLE, */
- },
- {
- .name = "homefs",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
-};
-
-static struct davinci_nand_pdata mityomapl138_nandflash_data = {
- .core_chipsel = 1,
- .parts = mityomapl138_nandflash_partition,
- .nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
- .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
- .bbt_options = NAND_BBT_USE_FLASH,
- .options = NAND_BUSWIDTH_16,
- .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
-};
-
-static struct resource mityomapl138_nandflash_resource[] = {
- {
- .start = DA8XX_AEMIF_CS3_BASE,
- .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DA8XX_AEMIF_CTL_BASE,
- .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device mityomapl138_aemif_devices[] = {
- {
- .name = "davinci_nand",
- .id = 1,
- .dev = {
- .platform_data = &mityomapl138_nandflash_data,
- },
- .num_resources = ARRAY_SIZE(mityomapl138_nandflash_resource),
- .resource = mityomapl138_nandflash_resource,
- },
-};
-
-static struct resource mityomapl138_aemif_resources[] = {
- {
- .start = DA8XX_AEMIF_CTL_BASE,
- .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct aemif_abus_data mityomapl138_aemif_abus_data[] = {
- {
- .cs = 1,
- },
-};
-
-static struct aemif_platform_data mityomapl138_aemif_pdata = {
- .abus_data = mityomapl138_aemif_abus_data,
- .num_abus_data = ARRAY_SIZE(mityomapl138_aemif_abus_data),
- .sub_devices = mityomapl138_aemif_devices,
- .num_sub_devices = ARRAY_SIZE(mityomapl138_aemif_devices),
-};
-
-static struct platform_device mityomapl138_aemif_device = {
- .name = "ti-aemif",
- .id = -1,
- .dev = {
- .platform_data = &mityomapl138_aemif_pdata,
- },
- .resource = mityomapl138_aemif_resources,
- .num_resources = ARRAY_SIZE(mityomapl138_aemif_resources),
-};
-
-static void __init mityomapl138_setup_nand(void)
-{
- if (platform_device_register(&mityomapl138_aemif_device))
- pr_warn("%s: Cannot register AEMIF device\n", __func__);
-}
-
-static const short mityomap_mii_pins[] = {
- DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
- DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
- DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
- DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
- DA850_MDIO_D,
- -1
-};
-
-static const short mityomap_rmii_pins[] = {
- DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
- DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
- DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
- DA850_MDIO_D,
- -1
-};
-
-static void __init mityomapl138_config_emac(void)
-{
- void __iomem *cfg_chip3_base;
- int ret;
- u32 val;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */
-
- cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
- val = __raw_readl(cfg_chip3_base);
-
- if (soc_info->emac_pdata->rmii_en) {
- val |= BIT(8);
- ret = davinci_cfg_reg_list(mityomap_rmii_pins);
- pr_info("RMII PHY configured\n");
- } else {
- val &= ~BIT(8);
- ret = davinci_cfg_reg_list(mityomap_mii_pins);
- pr_info("MII PHY configured\n");
- }
-
- if (ret) {
- pr_warn("mii/rmii mux setup failed: %d\n", ret);
- return;
- }
-
- /* configure the CFGCHIP3 register for RMII or MII */
- __raw_writel(val, cfg_chip3_base);
-
- soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID;
-
- ret = da8xx_register_emac();
- if (ret)
- pr_warn("emac registration failed: %d\n", ret);
-}
-
-static void __init mityomapl138_init(void)
-{
- int ret;
-
- da850_register_clocks();
-
- /* for now, no special EDMA channels are reserved */
- ret = da850_register_edma(NULL);
- if (ret)
- pr_warn("edma registration failed: %d\n", ret);
-
- ret = da8xx_register_watchdog();
- if (ret)
- pr_warn("watchdog registration failed: %d\n", ret);
-
- davinci_serial_init(da8xx_serial_device);
-
- nvmem_register_notifier(&mityomapl138_nvmem_notifier);
- nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
- nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
-
- ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
- if (ret)
- pr_warn("i2c0 registration failed: %d\n", ret);
-
- ret = pmic_tps65023_init();
- if (ret)
- pr_warn("TPS65023 PMIC init failed: %d\n", ret);
-
- mityomapl138_setup_nand();
-
- ret = spi_register_board_info(mityomapl138_spi_flash_info,
- ARRAY_SIZE(mityomapl138_spi_flash_info));
- if (ret)
- pr_warn("spi info registration failed: %d\n", ret);
-
- ret = da8xx_register_spi_bus(1,
- ARRAY_SIZE(mityomapl138_spi_flash_info));
- if (ret)
- pr_warn("spi 1 registration failed: %d\n", ret);
-
- mityomapl138_config_emac();
-
- ret = da8xx_register_rtc();
- if (ret)
- pr_warn("rtc setup failed: %d\n", ret);
-
- ret = da8xx_register_cpuidle();
- if (ret)
- pr_warn("cpuidle registration failed: %d\n", ret);
-
- davinci_pm_init();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init mityomapl138_console_init(void)
-{
- if (!machine_is_mityomapl138())
- return 0;
-
- return add_preferred_console("ttyS", 1, "115200");
-}
-console_initcall(mityomapl138_console_init);
-#endif
-
-static void __init mityomapl138_map_io(void)
-{
- da850_init();
-}
-
-MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
- .atag_offset = 0x100,
- .map_io = mityomapl138_map_io,
- .init_irq = da850_init_irq,
- .init_time = da850_init_time,
- .init_machine = mityomapl138_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
deleted file mode 100644
index 8a80115999ad..000000000000
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hawkboard.org based on TI's OMAP-L138 Platform
- *
- * Initial code: Syed Mohammed Khasim
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-
-#define HAWKBOARD_PHY_ID "davinci_mdio-0:07"
-
-#define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4)
-#define DA850_USB1_OC_PIN GPIO_TO_PIN(6, 13)
-
-static short omapl138_hawk_mii_pins[] __initdata = {
- DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
- DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
- DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
- DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
- DA850_MDIO_D,
- -1
-};
-
-static __init void omapl138_hawk_config_emac(void)
-{
- void __iomem *cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
- int ret;
- u32 val;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- val = __raw_readl(cfgchip3);
- val &= ~BIT(8);
- ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
- if (ret) {
- pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
- return;
- }
-
- /* configure the CFGCHIP3 register for MII */
- __raw_writel(val, cfgchip3);
- pr_info("EMAC: MII PHY configured\n");
-
- soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID;
-
- ret = da8xx_register_emac();
- if (ret)
- pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-}
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard,
- * hence they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
- /* (offset, number) */
- { 8, 6},
- {24, 4},
- {30, 2},
- {-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
- /* (offset, number) */
- { 8, 6},
- {24, 4},
- {30, 50},
- {-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
- /* (offset, number) */
- { 0, 28},
- {30, 2},
- {-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
- /* (offset, number) */
- { 0, 28},
- {30, 90},
- {-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
- .rsv_chans = da850_dma0_rsv_chans,
- .rsv_slots = da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
- .rsv_chans = da850_dma1_rsv_chans,
- .rsv_slots = da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
- &da850_edma_cc0_rsv,
- &da850_edma_cc1_rsv,
-};
-
-static const short hawk_mmcsd0_pins[] = {
- DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
- DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
- DA850_GPIO3_12, DA850_GPIO3_13,
- -1
-};
-
-#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
-#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
- .dev_id = "da830-mmc.0",
- .table = {
- GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd",
- GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp",
- GPIO_ACTIVE_LOW),
- },
-};
-
-static struct davinci_mmc_config da850_mmc_config = {
- .wires = 4,
- .max_freq = 50000000,
- .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static __init void omapl138_hawk_mmc_init(void)
-{
- int ret;
-
- ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
- if (ret) {
- pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
- return;
- }
-
- gpiod_add_lookup_table(&mmc_gpios_table);
-
- ret = da8xx_register_mmcsd0(&da850_mmc_config);
- if (ret) {
- pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
- goto mmc_setup_mmcsd_fail;
- }
-
- return;
-
-mmc_setup_mmcsd_fail:
- gpiod_remove_lookup_table(&mmc_gpios_table);
-}
-
-static struct mtd_partition omapl138_hawk_nandflash_partition[] = {
- {
- .name = "u-boot env",
- .offset = 0,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "u-boot",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_512K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "free space",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
-};
-
-static struct davinci_aemif_timing omapl138_hawk_nandflash_timing = {
- .wsetup = 24,
- .wstrobe = 21,
- .whold = 14,
- .rsetup = 19,
- .rstrobe = 50,
- .rhold = 0,
- .ta = 20,
-};
-
-static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
- .core_chipsel = 1,
- .parts = omapl138_hawk_nandflash_partition,
- .nr_parts = ARRAY_SIZE(omapl138_hawk_nandflash_partition),
- .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
- .ecc_bits = 4,
- .bbt_options = NAND_BBT_USE_FLASH,
- .options = NAND_BUSWIDTH_16,
- .timing = &omapl138_hawk_nandflash_timing,
- .mask_chipsel = 0,
- .mask_ale = 0,
- .mask_cle = 0,
-};
-
-static struct resource omapl138_hawk_nandflash_resource[] = {
- {
- .start = DA8XX_AEMIF_CS3_BASE,
- .end = DA8XX_AEMIF_CS3_BASE + SZ_32M,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DA8XX_AEMIF_CTL_BASE,
- .end = DA8XX_AEMIF_CTL_BASE + SZ_32K,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource omapl138_hawk_aemif_resource[] = {
- {
- .start = DA8XX_AEMIF_CTL_BASE,
- .end = DA8XX_AEMIF_CTL_BASE + SZ_32K,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = {
- {
- .cs = 3,
- }
-};
-
-static struct platform_device omapl138_hawk_aemif_devices[] = {
- {
- .name = "davinci_nand",
- .id = -1,
- .dev = {
- .platform_data = &omapl138_hawk_nandflash_data,
- },
- .resource = omapl138_hawk_nandflash_resource,
- .num_resources = ARRAY_SIZE(omapl138_hawk_nandflash_resource),
- }
-};
-
-static struct aemif_platform_data omapl138_hawk_aemif_pdata = {
- .cs_offset = 2,
- .abus_data = omapl138_hawk_aemif_abus_data,
- .num_abus_data = ARRAY_SIZE(omapl138_hawk_aemif_abus_data),
- .sub_devices = omapl138_hawk_aemif_devices,
- .num_sub_devices = ARRAY_SIZE(omapl138_hawk_aemif_devices),
-};
-
-static struct platform_device omapl138_hawk_aemif_device = {
- .name = "ti-aemif",
- .id = -1,
- .dev = {
- .platform_data = &omapl138_hawk_aemif_pdata,
- },
- .resource = omapl138_hawk_aemif_resource,
- .num_resources = ARRAY_SIZE(omapl138_hawk_aemif_resource),
-};
-
-static const short omapl138_hawk_nand_pins[] = {
- DA850_EMA_WAIT_1, DA850_NEMA_OE, DA850_NEMA_WE, DA850_NEMA_CS_3,
- DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
- DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
- DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11,
- DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15,
- DA850_EMA_A_1, DA850_EMA_A_2,
- -1
-};
-
-static int omapl138_hawk_register_aemif(void)
-{
- int ret;
-
- ret = davinci_cfg_reg_list(omapl138_hawk_nand_pins);
- if (ret)
- pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret);
-
- return platform_device_register(&omapl138_hawk_aemif_device);
-}
-
-static const short da850_hawk_usb11_pins[] = {
- DA850_GPIO2_4, DA850_GPIO6_13,
- -1
-};
-
-static struct regulator_consumer_supply hawk_usb_supplies[] = {
- REGULATOR_SUPPLY("vbus", NULL),
-};
-
-static struct regulator_init_data hawk_usb_vbus_data = {
- .consumer_supplies = hawk_usb_supplies,
- .num_consumer_supplies = ARRAY_SIZE(hawk_usb_supplies),
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct fixed_voltage_config hawk_usb_vbus = {
- .supply_name = "vbus",
- .microvolts = 3300000,
- .init_data = &hawk_usb_vbus_data,
-};
-
-static struct platform_device hawk_usb_vbus_device = {
- .name = "reg-fixed-voltage",
- .id = 0,
- .dev = {
- .platform_data = &hawk_usb_vbus,
- },
-};
-
-static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = {
- .dev_id = "ohci-da8xx",
- .table = {
- GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
- { }
- },
-};
-
-static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = {
- .dev_id = "reg-fixed-voltage.0",
- .table = {
- GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0),
- { }
- },
-};
-
-static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = {
- &hawk_usb_oc_gpio_lookup,
- &hawk_usb_vbus_gpio_lookup,
-};
-
-static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
- /* TPS2087 switch @ 5V */
- .potpgt = (3 + 1) / 2, /* 3 ms max */
-};
-
-static __init void omapl138_hawk_usb_init(void)
-{
- int ret;
-
- ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
- if (ret) {
- pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
- return;
- }
-
- ret = da8xx_register_usb_phy_clocks();
- if (ret)
- pr_warn("%s: USB PHY CLK registration failed: %d\n",
- __func__, ret);
-
- gpiod_add_lookup_tables(hawk_usb_gpio_lookups,
- ARRAY_SIZE(hawk_usb_gpio_lookups));
-
- ret = da8xx_register_usb_phy();
- if (ret)
- pr_warn("%s: USB PHY registration failed: %d\n",
- __func__, ret);
-
- ret = platform_device_register(&hawk_usb_vbus_device);
- if (ret) {
- pr_warn("%s: Unable to register the vbus supply\n", __func__);
- return;
- }
-
- ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
- if (ret)
- pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-
- return;
-}
-
-static __init void omapl138_hawk_init(void)
-{
- int ret;
-
- da850_register_clocks();
-
- ret = da850_register_gpio();
- if (ret)
- pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
- davinci_serial_init(da8xx_serial_device);
-
- omapl138_hawk_config_emac();
-
- ret = da850_register_edma(da850_edma_rsv);
- if (ret)
- pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
- omapl138_hawk_mmc_init();
-
- omapl138_hawk_usb_init();
-
- ret = omapl138_hawk_register_aemif();
- if (ret)
- pr_warn("%s: aemif registration failed: %d\n", __func__, ret);
-
- ret = da8xx_register_watchdog();
- if (ret)
- pr_warn("%s: watchdog registration failed: %d\n",
- __func__, ret);
-
- ret = da8xx_register_rproc();
- if (ret)
- pr_warn("%s: dsp/rproc registration failed: %d\n",
- __func__, ret);
-
- regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init omapl138_hawk_console_init(void)
-{
- if (!machine_is_omapl138_hawkboard())
- return 0;
-
- return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(omapl138_hawk_console_init);
-#endif
-
-static void __init omapl138_hawk_map_io(void)
-{
- da850_init();
-}
-
-MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
- .atag_offset = 0x100,
- .map_io = omapl138_hawk_map_io,
- .init_irq = da850_init_irq,
- .init_time = da850_init_time,
- .init_machine = omapl138_hawk_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
- .reserve = da8xx_rproc_reserve_cma,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
deleted file mode 100644
index 199c26d9a2b6..000000000000
--- a/arch/arm/mach-davinci/devices.c
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * mach-davinci/devices.c
- *
- * DaVinci platform device setup/initialization
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include "cputype.h"
-#include "mux.h"
-#include "davinci.h"
-#include "irqs.h"
-
-#define DAVINCI_I2C_BASE 0x01C21000
-#define DAVINCI_ATA_BASE 0x01C66000
-#define DAVINCI_MMCSD0_BASE 0x01E10000
-#define DM355_MMCSD0_BASE 0x01E11000
-#define DM355_MMCSD1_BASE 0x01E00000
-#define DM365_MMCSD0_BASE 0x01D11000
-#define DM365_MMCSD1_BASE 0x01D00000
-
-void __iomem *davinci_sysmod_base;
-
-void davinci_map_sysmod(void)
-{
- davinci_sysmod_base = ioremap(DAVINCI_SYSTEM_MODULE_BASE,
- 0x800);
- /*
- * Throw a bug since a lot of board initialization code depends
- * on system module availability. ioremap() failing this early
- * need careful looking into anyway.
- */
- BUG_ON(!davinci_sysmod_base);
-}
-
-static struct resource i2c_resources[] = {
- {
- .start = DAVINCI_I2C_BASE,
- .end = DAVINCI_I2C_BASE + 0x40,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_I2C),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device davinci_i2c_device = {
- .name = "i2c_davinci",
- .id = 1,
- .num_resources = ARRAY_SIZE(i2c_resources),
- .resource = i2c_resources,
-};
-
-void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
-{
- if (cpu_is_davinci_dm644x())
- davinci_cfg_reg(DM644X_I2C);
-
- davinci_i2c_device.dev.platform_data = pdata;
- (void) platform_device_register(&davinci_i2c_device);
-}
-
-static struct resource ide_resources[] = {
- {
- .start = DAVINCI_ATA_BASE,
- .end = DAVINCI_ATA_BASE + 0x7ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_IDE),
- .end = DAVINCI_INTC_IRQ(IRQ_IDE),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_device = {
- .name = "palm_bk3710",
- .id = -1,
- .resource = ide_resources,
- .num_resources = ARRAY_SIZE(ide_resources),
- .dev = {
- .dma_mask = &ide_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init davinci_init_ide(void)
-{
- if (cpu_is_davinci_dm644x()) {
- davinci_cfg_reg(DM644X_HPIEN_DISABLE);
- davinci_cfg_reg(DM644X_ATAEN);
- davinci_cfg_reg(DM644X_HDIREN);
- } else if (cpu_is_davinci_dm646x()) {
- /* IRQ_DM646X_IDE is the same as IRQ_IDE */
- davinci_cfg_reg(DM646X_ATAEN);
- } else {
- WARN_ON(1);
- return;
- }
-
- platform_device_register(&ide_device);
-}
-
-#if IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd0_resources[] = {
- {
- /* different on dm355 */
- .start = DAVINCI_MMCSD0_BASE,
- .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- /* IRQs: MMC/SD, then SDIO */
- {
- .start = DAVINCI_INTC_IRQ(IRQ_MMCINT),
- .flags = IORESOURCE_IRQ,
- }, {
- /* different on dm355 */
- .start = DAVINCI_INTC_IRQ(IRQ_SDIOINT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device davinci_mmcsd0_device = {
- .name = "dm6441-mmc",
- .id = 0,
- .dev = {
- .dma_mask = &mmcsd0_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(mmcsd0_resources),
- .resource = mmcsd0_resources,
-};
-
-static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd1_resources[] = {
- {
- .start = DM355_MMCSD1_BASE,
- .end = DM355_MMCSD1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- /* IRQs: MMC/SD, then SDIO */
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM355_MMCINT1),
- .flags = IORESOURCE_IRQ,
- }, {
- .start = DAVINCI_INTC_IRQ(IRQ_DM355_SDIOINT1),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device davinci_mmcsd1_device = {
- .name = "dm6441-mmc",
- .id = 1,
- .dev = {
- .dma_mask = &mmcsd1_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(mmcsd1_resources),
- .resource = mmcsd1_resources,
-};
-
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
- struct platform_device *pdev = NULL;
-
- if (WARN_ON(cpu_is_davinci_dm646x()))
- return;
-
- /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
- * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
- *
- * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
- * not handled right here ...
- */
- switch (module) {
- case 1:
- if (cpu_is_davinci_dm355()) {
- /* REVISIT we may not need all these pins if e.g. this
- * is a hard-wired SDIO device...
- */
- davinci_cfg_reg(DM355_SD1_CMD);
- davinci_cfg_reg(DM355_SD1_CLK);
- davinci_cfg_reg(DM355_SD1_DATA0);
- davinci_cfg_reg(DM355_SD1_DATA1);
- davinci_cfg_reg(DM355_SD1_DATA2);
- davinci_cfg_reg(DM355_SD1_DATA3);
- } else if (cpu_is_davinci_dm365()) {
- /* Configure pull down control */
- unsigned v;
-
- v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
- __raw_writel(v & ~0xfc0,
- DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-
- mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
- mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
- SZ_4K - 1;
- mmcsd1_resources[2].start = DAVINCI_INTC_IRQ(
- IRQ_DM365_SDIOINT1);
- davinci_mmcsd1_device.name = "da830-mmc";
- } else
- break;
-
- pdev = &davinci_mmcsd1_device;
- break;
- case 0:
- if (cpu_is_davinci_dm355()) {
- mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
- mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
- mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
- IRQ_DM355_SDIOINT0);
-
- /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */
- davinci_cfg_reg(DM355_MMCSD0);
-
- /* enable RX EDMA */
- davinci_cfg_reg(DM355_EVT26_MMC0_RX);
- } else if (cpu_is_davinci_dm365()) {
- mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
- mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
- SZ_4K - 1;
- mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
- IRQ_DM365_SDIOINT0);
- davinci_mmcsd0_device.name = "da830-mmc";
- } else if (cpu_is_davinci_dm644x()) {
- /* REVISIT: should this be in board-init code? */
- /* Power-on 3.3V IO cells */
- __raw_writel(0,
- DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
- /*Set up the pull regiter for MMC */
- davinci_cfg_reg(DM644X_MSTK);
- }
-
- pdev = &davinci_mmcsd0_device;
- break;
- }
-
- if (WARN_ON(!pdev))
- return;
-
- pdev->dev.platform_data = config;
- platform_device_register(pdev);
-}
-
-#else
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static struct resource wdt_resources[] = {
- {
- .start = DAVINCI_WDOG_BASE,
- .end = DAVINCI_WDOG_BASE + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device davinci_wdt_device = {
- .name = "davinci-wdt",
- .id = -1,
- .num_resources = ARRAY_SIZE(wdt_resources),
- .resource = wdt_resources,
-};
-
-int davinci_init_wdt(void)
-{
- return platform_device_register(&davinci_wdt_device);
-}
-
-static struct platform_device davinci_gpio_device = {
- .name = "davinci_gpio",
- .id = -1,
-};
-
-int davinci_gpio_register(struct resource *res, int size, void *pdata)
-{
- davinci_gpio_device.resource = res;
- davinci_gpio_device.num_resources = size;
- davinci_gpio_device.dev.platform_data = pdata;
- return platform_device_register(&davinci_gpio_device);
-}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
deleted file mode 100644
index a12ba859beca..000000000000
--- a/arch/arm/mach-davinci/dm355.c
+++ /dev/null
@@ -1,832 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM355 chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/spi/spi.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "serial.h"
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DM355_UART2_BASE (IO_PHYS + 0x206000)
-#define DM355_OSD_BASE (IO_PHYS + 0x70200)
-#define DM355_VENC_BASE (IO_PHYS + 0x70400)
-
-/*
- * Device specific clocks
- */
-#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */
-
-static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource dm355_spi0_resources[] = {
- {
- .start = 0x01c66000,
- .end = 0x01c667ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM355_SPINT0_0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct davinci_spi_platform_data dm355_spi0_pdata = {
- .version = SPI_VERSION_1,
- .num_chipselect = 2,
- .cshold_bug = true,
- .dma_event_q = EVENTQ_1,
- .prescaler_limit = 1,
-};
-static struct platform_device dm355_spi0_device = {
- .name = "spi_davinci",
- .id = 0,
- .dev = {
- .dma_mask = &dm355_spi0_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dm355_spi0_pdata,
- },
- .num_resources = ARRAY_SIZE(dm355_spi0_resources),
- .resource = dm355_spi0_resources,
-};
-
-void __init dm355_init_spi0(unsigned chipselect_mask,
- const struct spi_board_info *info, unsigned len)
-{
- /* for now, assume we need MISO */
- davinci_cfg_reg(DM355_SPI0_SDI);
-
- /* not all slaves will be wired up */
- if (chipselect_mask & BIT(0))
- davinci_cfg_reg(DM355_SPI0_SDENA0);
- if (chipselect_mask & BIT(1))
- davinci_cfg_reg(DM355_SPI0_SDENA1);
-
- spi_register_board_info(info, len);
-
- platform_device_register(&dm355_spi0_device);
-}
-
-/*----------------------------------------------------------------------*/
-
-#define INTMUX 0x18
-#define EVTMUX 0x1c
-
-/*
- * Device specific mux setup
- *
- * soc description mux mode mode mux dbg
- * reg offset mask mode
- */
-static const struct mux_config dm355_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false)
-
-MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false)
-MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false)
-MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false)
-MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false)
-MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false)
-MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false)
-
-MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false)
-MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false)
-
-MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false)
-MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false)
-MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false)
-MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false)
-MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false)
-MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false)
-
-MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false)
-MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false)
-MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false)
-
-INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false)
-INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false)
-INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false)
-
-EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false)
-EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false)
-EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false)
-
-MUX_CFG(DM355, VOUT_FIELD, 1, 18, 3, 1, false)
-MUX_CFG(DM355, VOUT_FIELD_G70, 1, 18, 3, 0, false)
-MUX_CFG(DM355, VOUT_HVSYNC, 1, 16, 1, 0, false)
-MUX_CFG(DM355, VOUT_COUTL_EN, 1, 0, 0xff, 0x55, false)
-MUX_CFG(DM355, VOUT_COUTH_EN, 1, 8, 0xff, 0x55, false)
-
-MUX_CFG(DM355, VIN_PCLK, 0, 14, 1, 1, false)
-MUX_CFG(DM355, VIN_CAM_WEN, 0, 13, 1, 1, false)
-MUX_CFG(DM355, VIN_CAM_VD, 0, 12, 1, 1, false)
-MUX_CFG(DM355, VIN_CAM_HD, 0, 11, 1, 1, false)
-MUX_CFG(DM355, VIN_YIN_EN, 0, 10, 1, 1, false)
-MUX_CFG(DM355, VIN_CINL_EN, 0, 0, 0xff, 0x55, false)
-MUX_CFG(DM355, VIN_CINH_EN, 0, 8, 3, 3, false)
-#endif
-};
-
-static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
- [IRQ_DM355_CCDC_VDINT0] = 2,
- [IRQ_DM355_CCDC_VDINT1] = 6,
- [IRQ_DM355_CCDC_VDINT2] = 6,
- [IRQ_DM355_IPIPE_HST] = 6,
- [IRQ_DM355_H3AINT] = 6,
- [IRQ_DM355_IPIPE_SDR] = 6,
- [IRQ_DM355_IPIPEIFINT] = 6,
- [IRQ_DM355_OSDINT] = 7,
- [IRQ_DM355_VENCINT] = 6,
- [IRQ_ASQINT] = 6,
- [IRQ_IMXINT] = 6,
- [IRQ_USBINT] = 4,
- [IRQ_DM355_RTOINT] = 4,
- [IRQ_DM355_UARTINT2] = 7,
- [IRQ_DM355_TINT6] = 7,
- [IRQ_CCINT0] = 5, /* dma */
- [IRQ_CCERRINT] = 5, /* dma */
- [IRQ_TCERRINT0] = 5, /* dma */
- [IRQ_TCERRINT] = 5, /* dma */
- [IRQ_DM355_SPINT2_1] = 7,
- [IRQ_DM355_TINT7] = 4,
- [IRQ_DM355_SDIOINT0] = 7,
- [IRQ_MBXINT] = 7,
- [IRQ_MBRINT] = 7,
- [IRQ_MMCINT] = 7,
- [IRQ_DM355_MMCINT1] = 7,
- [IRQ_DM355_PWMINT3] = 7,
- [IRQ_DDRINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_DM355_SDIOINT1] = 4,
- [IRQ_TINT0_TINT12] = 2, /* clockevent */
- [IRQ_TINT0_TINT34] = 2, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_PWMINT2] = 7,
- [IRQ_I2C] = 3,
- [IRQ_UARTINT0] = 3,
- [IRQ_UARTINT1] = 3,
- [IRQ_DM355_SPINT0_0] = 3,
- [IRQ_DM355_SPINT0_1] = 3,
- [IRQ_DM355_GPIO0] = 3,
- [IRQ_DM355_GPIO1] = 7,
- [IRQ_DM355_GPIO2] = 4,
- [IRQ_DM355_GPIO3] = 4,
- [IRQ_DM355_GPIO4] = 7,
- [IRQ_DM355_GPIO5] = 7,
- [IRQ_DM355_GPIO6] = 7,
- [IRQ_DM355_GPIO7] = 7,
- [IRQ_DM355_GPIO8] = 7,
- [IRQ_DM355_GPIO9] = 7,
- [IRQ_DM355_GPIOBNK0] = 7,
- [IRQ_DM355_GPIOBNK1] = 7,
- [IRQ_DM355_GPIOBNK2] = 7,
- [IRQ_DM355_GPIOBNK3] = 7,
- [IRQ_DM355_GPIOBNK4] = 7,
- [IRQ_DM355_GPIOBNK5] = 7,
- [IRQ_DM355_GPIOBNK6] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-static s8 queue_priority_mapping[][2] = {
- /* {event queue no, Priority} */
- {0, 3},
- {1, 7},
- {-1, -1},
-};
-
-static const struct dma_slave_map dm355_edma_map[] = {
- { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
- { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
- { "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) },
- { "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) },
- { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
- { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
- { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
- { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
- { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
- { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
- { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
- { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
- { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
- { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
-};
-
-static struct edma_soc_info dm355_edma_pdata = {
- .queue_priority_mapping = queue_priority_mapping,
- .default_queue = EVENTQ_1,
- .slave_map = dm355_edma_map,
- .slavecnt = ARRAY_SIZE(dm355_edma_map),
-};
-
-static struct resource edma_resources[] = {
- {
- .name = "edma3_cc",
- .start = 0x01c00000,
- .end = 0x01c00000 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc0",
- .start = 0x01c10000,
- .end = 0x01c10000 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc1",
- .start = 0x01c10400,
- .end = 0x01c10400 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_ccint",
- .start = DAVINCI_INTC_IRQ(IRQ_CCINT0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "edma3_ccerrint",
- .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT),
- .flags = IORESOURCE_IRQ,
- },
- /* not using (or muxing) TC*_ERR */
-};
-
-static const struct platform_device_info dm355_edma_device __initconst = {
- .name = "edma",
- .id = 0,
- .dma_mask = DMA_BIT_MASK(32),
- .res = edma_resources,
- .num_res = ARRAY_SIZE(edma_resources),
- .data = &dm355_edma_pdata,
- .size_data = sizeof(dm355_edma_pdata),
-};
-
-static struct resource dm355_asp1_resources[] = {
- {
- .name = "mpu",
- .start = DAVINCI_ASP1_BASE,
- .end = DAVINCI_ASP1_BASE + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_DMA_ASP1_TX,
- .end = DAVINCI_DMA_ASP1_TX,
- .flags = IORESOURCE_DMA,
- },
- {
- .start = DAVINCI_DMA_ASP1_RX,
- .end = DAVINCI_DMA_ASP1_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device dm355_asp1_device = {
- .name = "davinci-mcbsp",
- .id = 1,
- .num_resources = ARRAY_SIZE(dm355_asp1_resources),
- .resource = dm355_asp1_resources,
-};
-
-static void dm355_ccdc_setup_pinmux(void)
-{
- davinci_cfg_reg(DM355_VIN_PCLK);
- davinci_cfg_reg(DM355_VIN_CAM_WEN);
- davinci_cfg_reg(DM355_VIN_CAM_VD);
- davinci_cfg_reg(DM355_VIN_CAM_HD);
- davinci_cfg_reg(DM355_VIN_YIN_EN);
- davinci_cfg_reg(DM355_VIN_CINL_EN);
- davinci_cfg_reg(DM355_VIN_CINH_EN);
-}
-
-static struct resource dm355_vpss_resources[] = {
- {
- /* VPSS BL Base address */
- .name = "vpss",
- .start = 0x01c70800,
- .end = 0x01c70800 + 0xff,
- .flags = IORESOURCE_MEM,
- },
- {
- /* VPSS CLK Base address */
- .name = "vpss",
- .start = 0x01c70000,
- .end = 0x01c70000 + 0xf,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm355_vpss_device = {
- .name = "vpss",
- .id = -1,
- .dev.platform_data = "dm355_vpss",
- .num_resources = ARRAY_SIZE(dm355_vpss_resources),
- .resource = dm355_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VDINT0),
- .end = DAVINCI_INTC_IRQ(IRQ_VDINT0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VDINT1),
- .end = DAVINCI_INTC_IRQ(IRQ_VDINT1),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct resource dm355_ccdc_resource[] = {
- /* CCDC Base address */
- {
- .flags = IORESOURCE_MEM,
- .start = 0x01c70600,
- .end = 0x01c70600 + 0x1ff,
- },
-};
-static struct platform_device dm355_ccdc_dev = {
- .name = "dm355_ccdc",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm355_ccdc_resource),
- .resource = dm355_ccdc_resource,
- .dev = {
- .dma_mask = &vpfe_capture_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = dm355_ccdc_setup_pinmux,
- },
-};
-
-static struct platform_device vpfe_capture_dev = {
- .name = CAPTURE_DRV_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(vpfe_resources),
- .resource = vpfe_resources,
- .dev = {
- .dma_mask = &vpfe_capture_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource dm355_osd_resources[] = {
- {
- .start = DM355_OSD_BASE,
- .end = DM355_OSD_BASE + 0x17f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm355_osd_dev = {
- .name = DM355_VPBE_OSD_SUBDEV_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(dm355_osd_resources),
- .resource = dm355_osd_resources,
- .dev = {
- .dma_mask = &vpfe_capture_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource dm355_venc_resources[] = {
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
- .end = DAVINCI_INTC_IRQ(IRQ_VENCINT),
- .flags = IORESOURCE_IRQ,
- },
- /* venc registers io space */
- {
- .start = DM355_VENC_BASE,
- .end = DM355_VENC_BASE + 0x17f,
- .flags = IORESOURCE_MEM,
- },
- /* VDAC config register io space */
- {
- .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
- .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource dm355_v4l2_disp_resources[] = {
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
- .end = DAVINCI_INTC_IRQ(IRQ_VENCINT),
- .flags = IORESOURCE_IRQ,
- },
- /* venc registers io space */
- {
- .start = DM355_VENC_BASE,
- .end = DM355_VENC_BASE + 0x17f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int dm355_vpbe_setup_pinmux(u32 if_type, int field)
-{
- switch (if_type) {
- case MEDIA_BUS_FMT_SGRBG8_1X8:
- davinci_cfg_reg(DM355_VOUT_FIELD_G70);
- break;
- case MEDIA_BUS_FMT_YUYV10_1X20:
- if (field)
- davinci_cfg_reg(DM355_VOUT_FIELD);
- else
- davinci_cfg_reg(DM355_VOUT_FIELD_G70);
- break;
- default:
- return -EINVAL;
- }
-
- davinci_cfg_reg(DM355_VOUT_COUTL_EN);
- davinci_cfg_reg(DM355_VOUT_COUTH_EN);
-
- return 0;
-}
-
-static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type,
- unsigned int pclock)
-{
- void __iomem *vpss_clk_ctrl_reg;
-
- vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
-
- switch (type) {
- case VPBE_ENC_STD:
- writel(VPSS_DACCLKEN_ENABLE | VPSS_VENCCLKEN_ENABLE,
- vpss_clk_ctrl_reg);
- break;
- case VPBE_ENC_DV_TIMINGS:
- if (pclock > 27000000)
- /*
- * For HD, use external clock source since we cannot
- * support HD mode with internal clocks.
- */
- writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct platform_device dm355_vpbe_display = {
- .name = "vpbe-v4l2",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm355_v4l2_disp_resources),
- .resource = dm355_v4l2_disp_resources,
- .dev = {
- .dma_mask = &vpfe_capture_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct venc_platform_data dm355_venc_pdata = {
- .setup_pinmux = dm355_vpbe_setup_pinmux,
- .setup_clock = dm355_venc_setup_clock,
-};
-
-static struct platform_device dm355_venc_dev = {
- .name = DM355_VPBE_VENC_SUBDEV_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(dm355_venc_resources),
- .resource = dm355_venc_resources,
- .dev = {
- .dma_mask = &vpfe_capture_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *)&dm355_venc_pdata,
- },
-};
-
-static struct platform_device dm355_vpbe_dev = {
- .name = "vpbe_controller",
- .id = -1,
- .dev = {
- .dma_mask = &vpfe_capture_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource dm355_gpio_resources[] = {
- { /* registers */
- .start = DAVINCI_GPIO_BASE,
- .end = DAVINCI_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- { /* interrupt */
- .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0),
- .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1),
- .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2),
- .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3),
- .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4),
- .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5),
- .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6),
- .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
- .no_auto_base = true,
- .base = 0,
- .ngpio = 104,
-};
-
-int __init dm355_gpio_register(void)
-{
- return davinci_gpio_register(dm355_gpio_resources,
- ARRAY_SIZE(dm355_gpio_resources),
- &dm355_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm355_io_desc[] = {
- {
- .virtual = IO_VIRT,
- .pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
- .type = MT_DEVICE
- },
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm355_ids[] = {
- {
- .variant = 0x0,
- .part_no = 0xb73b,
- .manufacturer = 0x00f,
- .cpu_id = DAVINCI_CPU_ID_DM355,
- .name = "dm355",
- },
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm355_timer_cfg = {
- .reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
- .irq = {
- DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
- DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
- },
-};
-
-static struct plat_serial8250_port dm355_serial0_platform_data[] = {
- {
- .mapbase = DAVINCI_UART0_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-static struct plat_serial8250_port dm355_serial1_platform_data[] = {
- {
- .mapbase = DAVINCI_UART1_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-static struct plat_serial8250_port dm355_serial2_platform_data[] = {
- {
- .mapbase = DM355_UART2_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_DM355_UARTINT2),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-
-struct platform_device dm355_serial_device[] = {
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm355_serial0_platform_data,
- }
- },
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
- .dev = {
- .platform_data = dm355_serial1_platform_data,
- }
- },
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM2,
- .dev = {
- .platform_data = dm355_serial2_platform_data,
- }
- },
- {
- }
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm355 = {
- .io_desc = dm355_io_desc,
- .io_desc_num = ARRAY_SIZE(dm355_io_desc),
- .jtag_id_reg = 0x01c40028,
- .ids = dm355_ids,
- .ids_num = ARRAY_SIZE(dm355_ids),
- .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
- .pinmux_pins = dm355_pins,
- .pinmux_pins_num = ARRAY_SIZE(dm355_pins),
- .sram_dma = 0x00010000,
- .sram_len = SZ_32K,
-};
-
-void __init dm355_init_asp1(u32 evt_enable)
-{
- /* we don't use ASP1 IRQs, or we'd need to mux them ... */
- if (evt_enable & ASP1_TX_EVT_EN)
- davinci_cfg_reg(DM355_EVT8_ASP1_TX);
-
- if (evt_enable & ASP1_RX_EVT_EN)
- davinci_cfg_reg(DM355_EVT9_ASP1_RX);
-
- platform_device_register(&dm355_asp1_device);
-}
-
-void __init dm355_init(void)
-{
- davinci_common_init(&davinci_soc_info_dm355);
- davinci_map_sysmod();
-}
-
-void __init dm355_init_time(void)
-{
- void __iomem *pll1, *psc;
- struct clk *clk;
- int rv;
-
- clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ);
-
- pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
- dm355_pll1_init(NULL, pll1, NULL);
-
- psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
- dm355_psc_init(NULL, psc);
-
- clk = clk_get(NULL, "timer0");
- if (WARN_ON(IS_ERR(clk))) {
- pr_err("Unable to get the timer clock\n");
- return;
- }
-
- rv = davinci_timer_register(clk, &dm355_timer_cfg);
- WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm355_pll2_resources[] = {
- {
- .start = DAVINCI_PLL2_BASE,
- .end = DAVINCI_PLL2_BASE + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm355_pll2_device = {
- .name = "dm355-pll2",
- .id = -1,
- .resource = dm355_pll2_resources,
- .num_resources = ARRAY_SIZE(dm355_pll2_resources),
-};
-
-void __init dm355_register_clocks(void)
-{
- /* PLL1 and PSC are registered in dm355_init_time() */
- platform_device_register(&dm355_pll2_device);
-}
-
-int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
- struct vpbe_config *vpbe_cfg)
-{
- if (vpfe_cfg || vpbe_cfg)
- platform_device_register(&dm355_vpss_device);
-
- if (vpfe_cfg) {
- vpfe_capture_dev.dev.platform_data = vpfe_cfg;
- platform_device_register(&dm355_ccdc_dev);
- platform_device_register(&vpfe_capture_dev);
- }
-
- if (vpbe_cfg) {
- dm355_vpbe_dev.dev.platform_data = vpbe_cfg;
- platform_device_register(&dm355_osd_dev);
- platform_device_register(&dm355_venc_dev);
- platform_device_register(&dm355_vpbe_dev);
- platform_device_register(&dm355_vpbe_display);
- }
-
- return 0;
-}
-
-static const struct davinci_aintc_config dm355_aintc_config = {
- .reg = {
- .start = DAVINCI_ARM_INTC_BASE,
- .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .num_irqs = 64,
- .prios = dm355_default_priorities,
-};
-
-void __init dm355_init_irq(void)
-{
- davinci_aintc_init(&dm355_aintc_config);
-}
-
-static int __init dm355_init_devices(void)
-{
- struct platform_device *edma_pdev;
- int ret = 0;
-
- if (!cpu_is_davinci_dm355())
- return 0;
-
- davinci_cfg_reg(DM355_INT_EDMA_CC);
- edma_pdev = platform_device_register_full(&dm355_edma_device);
- if (IS_ERR(edma_pdev)) {
- pr_warn("%s: Failed to register eDMA\n", __func__);
- return PTR_ERR(edma_pdev);
- }
-
- ret = davinci_init_wdt();
- if (ret)
- pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
- return ret;
-}
-postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
deleted file mode 100644
index 7538bb87f373..000000000000
--- a/arch/arm/mach-davinci/dm365.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM365 chip specific setup
- *
- * Copyright (C) 2009 Texas Instruments
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/keyscan-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/spi/spi.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "serial.h"
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */
-#define DM365_RTC_BASE 0x01c69000
-#define DM365_KEYSCAN_BASE 0x01c69400
-#define DM365_OSD_BASE 0x01c71c00
-#define DM365_VENC_BASE 0x01c71e00
-#define DAVINCI_DM365_VC_BASE 0x01d0c000
-#define DAVINCI_DMA_VC_TX 2
-#define DAVINCI_DMA_VC_RX 3
-#define DM365_EMAC_BASE 0x01d07000
-#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000)
-#define DM365_EMAC_CNTRL_OFFSET 0x0000
-#define DM365_EMAC_CNTRL_MOD_OFFSET 0x3000
-#define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000
-#define DM365_EMAC_CNTRL_RAM_SIZE 0x2000
-
-#define INTMUX 0x18
-#define EVTMUX 0x1c
-
-
-static const struct mux_config dm365_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM365, MMCSD0, 0, 24, 1, 0, false)
-
-MUX_CFG(DM365, SD1_CLK, 0, 16, 3, 1, false)
-MUX_CFG(DM365, SD1_CMD, 4, 30, 3, 1, false)
-MUX_CFG(DM365, SD1_DATA3, 4, 28, 3, 1, false)
-MUX_CFG(DM365, SD1_DATA2, 4, 26, 3, 1, false)
-MUX_CFG(DM365, SD1_DATA1, 4, 24, 3, 1, false)
-MUX_CFG(DM365, SD1_DATA0, 4, 22, 3, 1, false)
-
-MUX_CFG(DM365, I2C_SDA, 3, 23, 3, 2, false)
-MUX_CFG(DM365, I2C_SCL, 3, 21, 3, 2, false)
-
-MUX_CFG(DM365, AEMIF_AR_A14, 2, 0, 3, 1, false)
-MUX_CFG(DM365, AEMIF_AR_BA0, 2, 0, 3, 2, false)
-MUX_CFG(DM365, AEMIF_A3, 2, 2, 3, 1, false)
-MUX_CFG(DM365, AEMIF_A7, 2, 4, 3, 1, false)
-MUX_CFG(DM365, AEMIF_D15_8, 2, 6, 1, 1, false)
-MUX_CFG(DM365, AEMIF_CE0, 2, 7, 1, 0, false)
-MUX_CFG(DM365, AEMIF_CE1, 2, 8, 1, 0, false)
-MUX_CFG(DM365, AEMIF_WE_OE, 2, 9, 1, 0, false)
-
-MUX_CFG(DM365, MCBSP0_BDX, 0, 23, 1, 1, false)
-MUX_CFG(DM365, MCBSP0_X, 0, 22, 1, 1, false)
-MUX_CFG(DM365, MCBSP0_BFSX, 0, 21, 1, 1, false)
-MUX_CFG(DM365, MCBSP0_BDR, 0, 20, 1, 1, false)
-MUX_CFG(DM365, MCBSP0_R, 0, 19, 1, 1, false)
-MUX_CFG(DM365, MCBSP0_BFSR, 0, 18, 1, 1, false)
-
-MUX_CFG(DM365, SPI0_SCLK, 3, 28, 1, 1, false)
-MUX_CFG(DM365, SPI0_SDI, 3, 26, 3, 1, false)
-MUX_CFG(DM365, SPI0_SDO, 3, 25, 1, 1, false)
-MUX_CFG(DM365, SPI0_SDENA0, 3, 29, 3, 1, false)
-MUX_CFG(DM365, SPI0_SDENA1, 3, 26, 3, 2, false)
-
-MUX_CFG(DM365, UART0_RXD, 3, 20, 1, 1, false)
-MUX_CFG(DM365, UART0_TXD, 3, 19, 1, 1, false)
-MUX_CFG(DM365, UART1_RXD, 3, 17, 3, 2, false)
-MUX_CFG(DM365, UART1_TXD, 3, 15, 3, 2, false)
-MUX_CFG(DM365, UART1_RTS, 3, 23, 3, 1, false)
-MUX_CFG(DM365, UART1_CTS, 3, 21, 3, 1, false)
-
-MUX_CFG(DM365, EMAC_TX_EN, 3, 17, 3, 1, false)
-MUX_CFG(DM365, EMAC_TX_CLK, 3, 15, 3, 1, false)
-MUX_CFG(DM365, EMAC_COL, 3, 14, 1, 1, false)
-MUX_CFG(DM365, EMAC_TXD3, 3, 13, 1, 1, false)
-MUX_CFG(DM365, EMAC_TXD2, 3, 12, 1, 1, false)
-MUX_CFG(DM365, EMAC_TXD1, 3, 11, 1, 1, false)
-MUX_CFG(DM365, EMAC_TXD0, 3, 10, 1, 1, false)
-MUX_CFG(DM365, EMAC_RXD3, 3, 9, 1, 1, false)
-MUX_CFG(DM365, EMAC_RXD2, 3, 8, 1, 1, false)
-MUX_CFG(DM365, EMAC_RXD1, 3, 7, 1, 1, false)
-MUX_CFG(DM365, EMAC_RXD0, 3, 6, 1, 1, false)
-MUX_CFG(DM365, EMAC_RX_CLK, 3, 5, 1, 1, false)
-MUX_CFG(DM365, EMAC_RX_DV, 3, 4, 1, 1, false)
-MUX_CFG(DM365, EMAC_RX_ER, 3, 3, 1, 1, false)
-MUX_CFG(DM365, EMAC_CRS, 3, 2, 1, 1, false)
-MUX_CFG(DM365, EMAC_MDIO, 3, 1, 1, 1, false)
-MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false)
-
-MUX_CFG(DM365, KEYSCAN, 2, 0, 0x3f, 0x3f, false)
-
-MUX_CFG(DM365, PWM0, 1, 0, 3, 2, false)
-MUX_CFG(DM365, PWM0_G23, 3, 26, 3, 3, false)
-MUX_CFG(DM365, PWM1, 1, 2, 3, 2, false)
-MUX_CFG(DM365, PWM1_G25, 3, 29, 3, 2, false)
-MUX_CFG(DM365, PWM2_G87, 1, 10, 3, 2, false)
-MUX_CFG(DM365, PWM2_G88, 1, 8, 3, 2, false)
-MUX_CFG(DM365, PWM2_G89, 1, 6, 3, 2, false)
-MUX_CFG(DM365, PWM2_G90, 1, 4, 3, 2, false)
-MUX_CFG(DM365, PWM3_G80, 1, 20, 3, 3, false)
-MUX_CFG(DM365, PWM3_G81, 1, 18, 3, 3, false)
-MUX_CFG(DM365, PWM3_G85, 1, 14, 3, 2, false)
-MUX_CFG(DM365, PWM3_G86, 1, 12, 3, 2, false)
-
-MUX_CFG(DM365, SPI1_SCLK, 4, 2, 3, 1, false)
-MUX_CFG(DM365, SPI1_SDI, 3, 31, 1, 1, false)
-MUX_CFG(DM365, SPI1_SDO, 4, 0, 3, 1, false)
-MUX_CFG(DM365, SPI1_SDENA0, 4, 4, 3, 1, false)
-MUX_CFG(DM365, SPI1_SDENA1, 4, 0, 3, 2, false)
-
-MUX_CFG(DM365, SPI2_SCLK, 4, 10, 3, 1, false)
-MUX_CFG(DM365, SPI2_SDI, 4, 6, 3, 1, false)
-MUX_CFG(DM365, SPI2_SDO, 4, 8, 3, 1, false)
-MUX_CFG(DM365, SPI2_SDENA0, 4, 12, 3, 1, false)
-MUX_CFG(DM365, SPI2_SDENA1, 4, 8, 3, 2, false)
-
-MUX_CFG(DM365, SPI3_SCLK, 0, 0, 3, 2, false)
-MUX_CFG(DM365, SPI3_SDI, 0, 2, 3, 2, false)
-MUX_CFG(DM365, SPI3_SDO, 0, 6, 3, 2, false)
-MUX_CFG(DM365, SPI3_SDENA0, 0, 4, 3, 2, false)
-MUX_CFG(DM365, SPI3_SDENA1, 0, 6, 3, 3, false)
-
-MUX_CFG(DM365, SPI4_SCLK, 4, 18, 3, 1, false)
-MUX_CFG(DM365, SPI4_SDI, 4, 14, 3, 1, false)
-MUX_CFG(DM365, SPI4_SDO, 4, 16, 3, 1, false)
-MUX_CFG(DM365, SPI4_SDENA0, 4, 20, 3, 1, false)
-MUX_CFG(DM365, SPI4_SDENA1, 4, 16, 3, 2, false)
-
-MUX_CFG(DM365, CLKOUT0, 4, 20, 3, 3, false)
-MUX_CFG(DM365, CLKOUT1, 4, 16, 3, 3, false)
-MUX_CFG(DM365, CLKOUT2, 4, 8, 3, 3, false)
-
-MUX_CFG(DM365, GPIO20, 3, 21, 3, 0, false)
-MUX_CFG(DM365, GPIO30, 4, 6, 3, 0, false)
-MUX_CFG(DM365, GPIO31, 4, 8, 3, 0, false)
-MUX_CFG(DM365, GPIO32, 4, 10, 3, 0, false)
-MUX_CFG(DM365, GPIO33, 4, 12, 3, 0, false)
-MUX_CFG(DM365, GPIO40, 4, 26, 3, 0, false)
-MUX_CFG(DM365, GPIO64_57, 2, 6, 1, 0, false)
-
-MUX_CFG(DM365, VOUT_FIELD, 1, 18, 3, 1, false)
-MUX_CFG(DM365, VOUT_FIELD_G81, 1, 18, 3, 0, false)
-MUX_CFG(DM365, VOUT_HVSYNC, 1, 16, 1, 0, false)
-MUX_CFG(DM365, VOUT_COUTL_EN, 1, 0, 0xff, 0x55, false)
-MUX_CFG(DM365, VOUT_COUTH_EN, 1, 8, 0xff, 0x55, false)
-MUX_CFG(DM365, VIN_CAM_WEN, 0, 14, 3, 0, false)
-MUX_CFG(DM365, VIN_CAM_VD, 0, 13, 1, 0, false)
-MUX_CFG(DM365, VIN_CAM_HD, 0, 12, 1, 0, false)
-MUX_CFG(DM365, VIN_YIN4_7_EN, 0, 0, 0xff, 0, false)
-MUX_CFG(DM365, VIN_YIN0_3_EN, 0, 8, 0xf, 0, false)
-
-INT_CFG(DM365, INT_EDMA_CC, 2, 1, 1, false)
-INT_CFG(DM365, INT_EDMA_TC0_ERR, 3, 1, 1, false)
-INT_CFG(DM365, INT_EDMA_TC1_ERR, 4, 1, 1, false)
-INT_CFG(DM365, INT_EDMA_TC2_ERR, 22, 1, 1, false)
-INT_CFG(DM365, INT_EDMA_TC3_ERR, 23, 1, 1, false)
-INT_CFG(DM365, INT_PRTCSS, 10, 1, 1, false)
-INT_CFG(DM365, INT_EMAC_RXTHRESH, 14, 1, 1, false)
-INT_CFG(DM365, INT_EMAC_RXPULSE, 15, 1, 1, false)
-INT_CFG(DM365, INT_EMAC_TXPULSE, 16, 1, 1, false)
-INT_CFG(DM365, INT_EMAC_MISCPULSE, 17, 1, 1, false)
-INT_CFG(DM365, INT_IMX0_ENABLE, 0, 1, 0, false)
-INT_CFG(DM365, INT_IMX0_DISABLE, 0, 1, 1, false)
-INT_CFG(DM365, INT_HDVICP_ENABLE, 0, 1, 1, false)
-INT_CFG(DM365, INT_HDVICP_DISABLE, 0, 1, 0, false)
-INT_CFG(DM365, INT_IMX1_ENABLE, 24, 1, 1, false)
-INT_CFG(DM365, INT_IMX1_DISABLE, 24, 1, 0, false)
-INT_CFG(DM365, INT_NSF_ENABLE, 25, 1, 1, false)
-INT_CFG(DM365, INT_NSF_DISABLE, 25, 1, 0, false)
-
-EVT_CFG(DM365, EVT2_ASP_TX, 0, 1, 0, false)
-EVT_CFG(DM365, EVT3_ASP_RX, 1, 1, 0, false)
-EVT_CFG(DM365, EVT2_VC_TX, 0, 1, 1, false)
-EVT_CFG(DM365, EVT3_VC_RX, 1, 1, 1, false)
-#endif
-};
-
-static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct davinci_spi_platform_data dm365_spi0_pdata = {
- .version = SPI_VERSION_1,
- .num_chipselect = 2,
- .dma_event_q = EVENTQ_3,
- .prescaler_limit = 1,
-};
-
-static struct resource dm365_spi0_resources[] = {
- {
- .start = 0x01c66000,
- .end = 0x01c667ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_SPIINT0_0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dm365_spi0_device = {
- .name = "spi_davinci",
- .id = 0,
- .dev = {
- .dma_mask = &dm365_spi0_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dm365_spi0_pdata,
- },
- .num_resources = ARRAY_SIZE(dm365_spi0_resources),
- .resource = dm365_spi0_resources,
-};
-
-void __init dm365_init_spi0(unsigned chipselect_mask,
- const struct spi_board_info *info, unsigned len)
-{
- davinci_cfg_reg(DM365_SPI0_SCLK);
- davinci_cfg_reg(DM365_SPI0_SDI);
- davinci_cfg_reg(DM365_SPI0_SDO);
-
- /* not all slaves will be wired up */
- if (chipselect_mask & BIT(0))
- davinci_cfg_reg(DM365_SPI0_SDENA0);
- if (chipselect_mask & BIT(1))
- davinci_cfg_reg(DM365_SPI0_SDENA1);
-
- spi_register_board_info(info, len);
-
- platform_device_register(&dm365_spi0_device);
-}
-
-static struct resource dm365_gpio_resources[] = {
- { /* registers */
- .start = DAVINCI_GPIO_BASE,
- .end = DAVINCI_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- { /* interrupt */
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
- .no_auto_base = true,
- .base = 0,
- .ngpio = 104,
- .gpio_unbanked = 8,
-};
-
-int __init dm365_gpio_register(void)
-{
- return davinci_gpio_register(dm365_gpio_resources,
- ARRAY_SIZE(dm365_gpio_resources),
- &dm365_gpio_platform_data);
-}
-
-static struct emac_platform_data dm365_emac_pdata = {
- .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET,
- .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET,
- .ctrl_ram_offset = DM365_EMAC_CNTRL_RAM_OFFSET,
- .ctrl_ram_size = DM365_EMAC_CNTRL_RAM_SIZE,
- .version = EMAC_VERSION_2,
-};
-
-static struct resource dm365_emac_resources[] = {
- {
- .start = DM365_EMAC_BASE,
- .end = DM365_EMAC_BASE + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dm365_emac_device = {
- .name = "davinci_emac",
- .id = 1,
- .dev = {
- .platform_data = &dm365_emac_pdata,
- },
- .num_resources = ARRAY_SIZE(dm365_emac_resources),
- .resource = dm365_emac_resources,
-};
-
-static struct resource dm365_mdio_resources[] = {
- {
- .start = DM365_EMAC_MDIO_BASE,
- .end = DM365_EMAC_MDIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm365_mdio_device = {
- .name = "davinci_mdio",
- .id = 0,
- .num_resources = ARRAY_SIZE(dm365_mdio_resources),
- .resource = dm365_mdio_resources,
-};
-
-static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
- [IRQ_VDINT0] = 2,
- [IRQ_VDINT1] = 6,
- [IRQ_VDINT2] = 6,
- [IRQ_HISTINT] = 6,
- [IRQ_H3AINT] = 6,
- [IRQ_PRVUINT] = 6,
- [IRQ_RSZINT] = 6,
- [IRQ_DM365_INSFINT] = 7,
- [IRQ_VENCINT] = 6,
- [IRQ_ASQINT] = 6,
- [IRQ_IMXINT] = 6,
- [IRQ_DM365_IMCOPINT] = 4,
- [IRQ_USBINT] = 4,
- [IRQ_DM365_RTOINT] = 7,
- [IRQ_DM365_TINT5] = 7,
- [IRQ_DM365_TINT6] = 5,
- [IRQ_CCINT0] = 5,
- [IRQ_CCERRINT] = 5,
- [IRQ_TCERRINT0] = 5,
- [IRQ_TCERRINT] = 7,
- [IRQ_PSCIN] = 4,
- [IRQ_DM365_SPINT2_1] = 7,
- [IRQ_DM365_TINT7] = 7,
- [IRQ_DM365_SDIOINT0] = 7,
- [IRQ_MBXINT] = 7,
- [IRQ_MBRINT] = 7,
- [IRQ_MMCINT] = 7,
- [IRQ_DM365_MMCINT1] = 7,
- [IRQ_DM365_PWMINT3] = 7,
- [IRQ_AEMIFINT] = 2,
- [IRQ_DM365_SDIOINT1] = 2,
- [IRQ_TINT0_TINT12] = 7,
- [IRQ_TINT0_TINT34] = 7,
- [IRQ_TINT1_TINT12] = 7,
- [IRQ_TINT1_TINT34] = 7,
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 3,
- [IRQ_PWMINT2] = 3,
- [IRQ_I2C] = 3,
- [IRQ_UARTINT0] = 3,
- [IRQ_UARTINT1] = 3,
- [IRQ_DM365_RTCINT] = 3,
- [IRQ_DM365_SPIINT0_0] = 3,
- [IRQ_DM365_SPIINT3_0] = 3,
- [IRQ_DM365_GPIO0] = 3,
- [IRQ_DM365_GPIO1] = 7,
- [IRQ_DM365_GPIO2] = 4,
- [IRQ_DM365_GPIO3] = 4,
- [IRQ_DM365_GPIO4] = 7,
- [IRQ_DM365_GPIO5] = 7,
- [IRQ_DM365_GPIO6] = 7,
- [IRQ_DM365_GPIO7] = 7,
- [IRQ_DM365_EMAC_RXTHRESH] = 7,
- [IRQ_DM365_EMAC_RXPULSE] = 7,
- [IRQ_DM365_EMAC_TXPULSE] = 7,
- [IRQ_DM365_EMAC_MISCPULSE] = 7,
- [IRQ_DM365_GPIO12] = 7,
- [IRQ_DM365_GPIO13] = 7,
- [IRQ_DM365_GPIO14] = 7,
- [IRQ_DM365_GPIO15] = 7,
- [IRQ_DM365_KEYINT] = 7,
- [IRQ_DM365_TCERRINT2] = 7,
- [IRQ_DM365_TCERRINT3] = 7,
- [IRQ_DM365_EMUINT] = 7,
-};
-
-/* Four Transfer Controllers on DM365 */
-static s8 dm365_queue_priority_mapping[][2] = {
- /* {event queue no, Priority} */
- {0, 7},
- {1, 7},
- {2, 7},
- {3, 0},
- {-1, -1},
-};
-
-static const struct dma_slave_map dm365_edma_map[] = {
- { "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
- { "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
- { "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
- { "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
- { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
- { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
- { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
- { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
- { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
- { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
- { "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) },
- { "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) },
- { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
- { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
- { "da830-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
- { "da830-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
-};
-
-static struct edma_soc_info dm365_edma_pdata = {
- .queue_priority_mapping = dm365_queue_priority_mapping,
- .default_queue = EVENTQ_3,
- .slave_map = dm365_edma_map,
- .slavecnt = ARRAY_SIZE(dm365_edma_map),
-};
-
-static struct resource edma_resources[] = {
- {
- .name = "edma3_cc",
- .start = 0x01c00000,
- .end = 0x01c00000 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc0",
- .start = 0x01c10000,
- .end = 0x01c10000 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc1",
- .start = 0x01c10400,
- .end = 0x01c10400 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc2",
- .start = 0x01c10800,
- .end = 0x01c10800 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_tc3",
- .start = 0x01c10c00,
- .end = 0x01c10c00 + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "edma3_ccint",
- .start = DAVINCI_INTC_IRQ(IRQ_CCINT0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "edma3_ccerrint",
- .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT),
- .flags = IORESOURCE_IRQ,
- },
- /* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm365_edma_device __initconst = {
- .name = "edma",
- .id = 0,
- .dma_mask = DMA_BIT_MASK(32),
- .res = edma_resources,
- .num_res = ARRAY_SIZE(edma_resources),
- .data = &dm365_edma_pdata,
- .size_data = sizeof(dm365_edma_pdata),
-};
-
-static struct resource dm365_asp_resources[] = {
- {
- .name = "mpu",
- .start = DAVINCI_DM365_ASP0_BASE,
- .end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_DMA_ASP0_TX,
- .end = DAVINCI_DMA_ASP0_TX,
- .flags = IORESOURCE_DMA,
- },
- {
- .start = DAVINCI_DMA_ASP0_RX,
- .end = DAVINCI_DMA_ASP0_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device dm365_asp_device = {
- .name = "davinci-mcbsp",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm365_asp_resources),
- .resource = dm365_asp_resources,
-};
-
-static struct resource dm365_vc_resources[] = {
- {
- .start = DAVINCI_DM365_VC_BASE,
- .end = DAVINCI_DM365_VC_BASE + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_DMA_VC_TX,
- .end = DAVINCI_DMA_VC_TX,
- .flags = IORESOURCE_DMA,
- },
- {
- .start = DAVINCI_DMA_VC_RX,
- .end = DAVINCI_DMA_VC_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device dm365_vc_device = {
- .name = "davinci_voicecodec",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm365_vc_resources),
- .resource = dm365_vc_resources,
-};
-
-static struct resource dm365_rtc_resources[] = {
- {
- .start = DM365_RTC_BASE,
- .end = DM365_RTC_BASE + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_RTCINT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dm365_rtc_device = {
- .name = "rtc_davinci",
- .id = 0,
- .num_resources = ARRAY_SIZE(dm365_rtc_resources),
- .resource = dm365_rtc_resources,
-};
-
-static struct map_desc dm365_io_desc[] = {
- {
- .virtual = IO_VIRT,
- .pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
- .type = MT_DEVICE
- },
-};
-
-static struct resource dm365_ks_resources[] = {
- {
- /* registers */
- .start = DM365_KEYSCAN_BASE,
- .end = DM365_KEYSCAN_BASE + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- /* interrupt */
- .start = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT),
- .end = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dm365_ks_device = {
- .name = "davinci_keyscan",
- .id = 0,
- .num_resources = ARRAY_SIZE(dm365_ks_resources),
- .resource = dm365_ks_resources,
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm365_ids[] = {
- {
- .variant = 0x0,
- .part_no = 0xb83e,
- .manufacturer = 0x017,
- .cpu_id = DAVINCI_CPU_ID_DM365,
- .name = "dm365_rev1.1",
- },
- {
- .variant = 0x8,
- .part_no = 0xb83e,
- .manufacturer = 0x017,
- .cpu_id = DAVINCI_CPU_ID_DM365,
- .name = "dm365_rev1.2",
- },
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm365_timer_cfg = {
- .reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_128),
- .irq = {
- DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
- DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
- },
-};
-
-#define DM365_UART1_BASE (IO_PHYS + 0x106000)
-
-static struct plat_serial8250_port dm365_serial0_platform_data[] = {
- {
- .mapbase = DAVINCI_UART0_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-static struct plat_serial8250_port dm365_serial1_platform_data[] = {
- {
- .mapbase = DM365_UART1_BASE,
- .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1),
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0,
- }
-};
-
-struct platform_device dm365_serial_device[] = {
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm365_serial0_platform_data,
- }
- },
- {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
- .dev = {
- .platform_data = dm365_serial1_platform_data,
- }
- },
- {
- }
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm365 = {
- .io_desc = dm365_io_desc,
- .io_desc_num = ARRAY_SIZE(dm365_io_desc),
- .jtag_id_reg = 0x01c40028,
- .ids = dm365_ids,
- .ids_num = ARRAY_SIZE(dm365_ids),
- .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
- .pinmux_pins = dm365_pins,
- .pinmux_pins_num = ARRAY_SIZE(dm365_pins),
- .emac_pdata = &dm365_emac_pdata,
- .sram_dma = 0x00010000,
- .sram_len = SZ_32K,
-};
-
-void __init dm365_init_asp(void)
-{
- davinci_cfg_reg(DM365_MCBSP0_BDX);
- davinci_cfg_reg(DM365_MCBSP0_X);
- davinci_cfg_reg(DM365_MCBSP0_BFSX);
- davinci_cfg_reg(DM365_MCBSP0_BDR);
- davinci_cfg_reg(DM365_MCBSP0_R);
- davinci_cfg_reg(DM365_MCBSP0_BFSR);
- davinci_cfg_reg(DM365_EVT2_ASP_TX);
- davinci_cfg_reg(DM365_EVT3_ASP_RX);
- platform_device_register(&dm365_asp_device);
-}
-
-void __init dm365_init_vc(void)
-{
- davinci_cfg_reg(DM365_EVT2_VC_TX);
- davinci_cfg_reg(DM365_EVT3_VC_RX);
- platform_device_register(&dm365_vc_device);
-}
-
-void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
-{
- dm365_ks_device.dev.platform_data = pdata;
- platform_device_register(&dm365_ks_device);
-}
-
-void __init dm365_init_rtc(void)
-{
- davinci_cfg_reg(DM365_INT_PRTCSS);
- platform_device_register(&dm365_rtc_device);
-}
-
-void __init dm365_init(void)
-{
- davinci_common_init(&davinci_soc_info_dm365);
- davinci_map_sysmod();
-}
-
-void __init dm365_init_time(void)
-{
- void __iomem *pll1, *pll2, *psc;
- struct clk *clk;
- int rv;
-
- clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ);
-
- pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
- dm365_pll1_init(NULL, pll1, NULL);
-
- pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_1K);
- dm365_pll2_init(NULL, pll2, NULL);
-
- psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
- dm365_psc_init(NULL, psc);
-
- clk = clk_get(NULL, "timer0");
- if (WARN_ON(IS_ERR(clk))) {
- pr_err("Unable to get the timer clock\n");
- return;
- }
-
- rv = davinci_timer_register(clk, &dm365_timer_cfg);
- WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-void __init dm365_register_clocks(void)
-{
- /* all clocks are currently registered in dm365_init_time() */
-}
-
-static struct resource dm365_vpss_resources[] = {
- {
- /* VPSS ISP5 Base address */
- .name = "isp5",
- .start = 0x01c70000,
- .end = 0x01c70000 + 0xff,
- .flags = IORESOURCE_MEM,
- },
- {
- /* VPSS CLK Base address */
- .name = "vpss",
- .start = 0x01c70200,
- .end = 0x01c70200 + 0xff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device dm365_vpss_device = {
- .name = "vpss",
- .id = -1,
- .dev.platform_data = "dm365_vpss",
- .num_resources = ARRAY_SIZE(dm365_vpss_resources),
- .resource = dm365_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VDINT0),
- .end = DAVINCI_INTC_IRQ(IRQ_VDINT0),
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VDINT1),
- .end = DAVINCI_INTC_IRQ(IRQ_VDINT1),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct platform_device vpfe_capture_dev = {
- .name = CAPTURE_DRV_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(vpfe_resources),
- .resource = vpfe_resources,
- .dev = {
- .dma_mask = &vpfe_capture_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static void dm365_isif_setup_pinmux(void)
-{
- davinci_cfg_reg(DM365_VIN_CAM_WEN);
- davinci_cfg_reg(DM365_VIN_CAM_VD);
- davinci_cfg_reg(DM365_VIN_CAM_HD);
- davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
- davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
-}
-
-static struct resource isif_resource[] = {
- /* ISIF Base address */
- {
- .start = 0x01c71000,
- .end = 0x01c71000 + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- /* ISIF Linearization table 0 */
- {
- .start = 0x1C7C000,
- .end = 0x1C7C000 + 0x2ff,
- .flags = IORESOURCE_MEM,
- },
- /* ISIF Linearization table 1 */
- {
- .start = 0x1C7C400,
- .end = 0x1C7C400 + 0x2ff,
- .flags = IORESOURCE_MEM,
- },
-};
-static struct platform_device dm365_isif_dev = {
- .name = "isif",
- .id = -1,
- .num_resources = ARRAY_SIZE(isif_resource),
- .resource = isif_resource,
- .dev = {
- .dma_mask = &vpfe_capture_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = dm365_isif_setup_pinmux,
- },
-};
-
-static struct resource dm365_osd_resources[] = {
- {
- .start = DM365_OSD_BASE,
- .end = DM365_OSD_BASE + 0xff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static u64 dm365_video_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device dm365_osd_dev = {
- .name = DM365_VPBE_OSD_SUBDEV_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(dm365_osd_resources),
- .resource = dm365_osd_resources,
- .dev = {
- .dma_mask = &dm365_video_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource dm365_venc_resources[] = {
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
- .end = DAVINCI_INTC_IRQ(IRQ_VENCINT),
- .flags = IORESOURCE_IRQ,
- },
- /* venc registers io space */
- {
- .start = DM365_VENC_BASE,
- .end = DM365_VENC_BASE + 0x177,
- .flags = IORESOURCE_MEM,
- },
- /* vdaccfg registers io space */
- {
- .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
- .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource dm365_v4l2_disp_resources[] = {
- {
- .start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
- .end = DAVINCI_INTC_IRQ(IRQ_VENCINT),
- .flags = IORESOURCE_IRQ,
- },
- /* venc registers io space */
- {
- .start = DM365_VENC_BASE,
- .end = DM365_VENC_BASE + 0x177,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int dm365_vpbe_setup_pinmux(u32 if_type, int field)
-{
- switch (if_type) {
- case MEDIA_BUS_FMT_SGRBG8_1X8:
- davinci_cfg_reg(DM365_VOUT_FIELD_G81);
- davinci_cfg_reg(DM365_VOUT_COUTL_EN);
- davinci_cfg_reg(DM365_VOUT_COUTH_EN);
- break;
- case MEDIA_BUS_FMT_YUYV10_1X20:
- if (field)
- davinci_cfg_reg(DM365_VOUT_FIELD);
- else
- davinci_cfg_reg(DM365_VOUT_FIELD_G81);
- davinci_cfg_reg(DM365_VOUT_COUTL_EN);
- davinci_cfg_reg(DM365_VOUT_COUTH_EN);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type,
- unsigned int pclock)
-{
- void __iomem *vpss_clkctl_reg;
- u32 val;
-
- vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
-
- switch (type) {
- case VPBE_ENC_STD:
- val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE;
- break;
- case VPBE_ENC_DV_TIMINGS:
- if (pclock <= 27000000) {
- val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE;
- } else {
- /* set sysclk4 to output 74.25 MHz from pll1 */
- val = VPSS_PLLC2SYSCLK5_ENABLE | VPSS_DACCLKEN_ENABLE |
- VPSS_VENCCLKEN_ENABLE;
- }
- break;
- default:
- return -EINVAL;
- }
- writel(val, vpss_clkctl_reg);
-
- return 0;
-}
-
-static struct platform_device dm365_vpbe_display = {
- .name = "vpbe-v4l2",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm365_v4l2_disp_resources),
- .resource = dm365_v4l2_disp_resources,
- .dev = {
- .dma_mask = &dm365_video_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct venc_platform_data dm365_venc_pdata = {
- .setup_pinmux = dm365_vpbe_setup_pinmux,
- .setup_clock = dm365_venc_setup_clock,
-};
-
-static struct platform_device dm365_venc_dev = {
- .name = DM365_VPBE_VENC_SUBDEV_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(dm365_venc_resources),
- .resource = dm365_venc_resources,
- .dev = {
- .dma_mask = &dm365_video_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = (void *)&dm365_venc_pdata,
- },
-};
-
-static struct platform_device dm365_vpbe_dev = {
- .name = "vpbe_controller",
- .id = -1,
- .dev = {
- .dma_mask = &dm365_video_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
- struct vpbe_config *vpbe_cfg)
-{
- if (vpfe_cfg || vpbe_cfg)
- platform_device_register(&dm365_vpss_device);
-
- if (vpfe_cfg) {
- vpfe_capture_dev.dev.platform_data = vpfe_cfg;
- platform_device_register(&dm365_isif_dev);
- platform_device_register(&vpfe_capture_dev);
- }
- if (vpbe_cfg) {
- dm365_vpbe_dev.dev.platform_data = vpbe_cfg;
- platform_device_register(&dm365_osd_dev);
- platform_device_register(&dm365_venc_dev);
- platform_device_register(&dm365_vpbe_dev);
- platform_device_register(&dm365_vpbe_display);
- }
-
- return 0;
-}
-
-static const struct davinci_aintc_config dm365_aintc_config = {
- .reg = {
- .start = DAVINCI_ARM_INTC_BASE,
- .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .num_irqs = 64,
- .prios = dm365_default_priorities,
-};
-
-void __init dm365_init_irq(void)
-{
- davinci_aintc_init(&dm365_aintc_config);
-}
-
-static int __init dm365_init_devices(void)
-{
- struct platform_device *edma_pdev;
- int ret = 0;
-
- if (!cpu_is_davinci_dm365())
- return 0;
-
- davinci_cfg_reg(DM365_INT_EDMA_CC);
- edma_pdev = platform_device_register_full(&dm365_edma_device);
- if (IS_ERR(edma_pdev)) {
- pr_warn("%s: Failed to register eDMA\n", __func__);
- return PTR_ERR(edma_pdev);
- }
-
- platform_device_register(&dm365_mdio_device);
- platform_device_register(&dm365_emac_device);
-
- ret = davinci_init_wdt();
- if (ret)
- pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
- return ret;
-}
-postcore_initcall(dm365_init_devices);
--
2.29.2
\
 
 \ /
  Last update: 2022-10-19 17:44    [W:0.233 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site