lkml.org 
[lkml]   [2022]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 3/3] dt-bindings: pinctrl: qcom,sc7180: convert to dtschema
From
On 14/10/2022 14:02, Doug Anderson wrote:
> Hi,
>
> On Thu, Oct 13, 2022 at 11:49 AM Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..464f1031d15d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
>
> [ ... cut ... ]
>
>> @@ -0,0 +1,162 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7180-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm SC7180 TLMM pin controller
>> +
>> +maintainers:
>> + - Bjorn Andersson <andersson@kernel.org>
>> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> +
>> +description:
>> + Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC.
>> +
>> +properties:
>> + compatible:
>> + const: qcom,sc7180-pinctrl
>> +
>> + reg:
>> + maxItems: 3
>> +
>> + reg-names:
>> + items:
>> + - const: west
>> + - const: north
>> + - const: south
>> +
>> + interrupts: true
>> + interrupt-controller: true
>> + "#interrupt-cells": true
>> + gpio-controller: true
>> + "#gpio-cells": true
>> + gpio-ranges: true
>> + wakeup-parent: true
>
> Do you need interrupts/interrupt-controller/.../... ? Below you
> include allOf "/schemas/pinctrl/qcom,tlmm-common.yaml". Won't you
> magically get those from there? Why do you need to duplicate this?

There is additionalProperties:false, so every property from referenced
schema has to be included.

The true solution would be to switch to unevaluatedProperties:false but
then we accept all properties from:
1. qcom,tlmm-common.yaml - not a problem, we already mention all of them
here with :true
2. pinctrl.yaml - we would now allow to use pinctrl-use-default.
3. any other future common properties.

>
>
>> + gpio-reserved-ranges:
>> + minItems: 1
>> + maxItems: 60
>> +
>> + gpio-line-names:
>> + maxItems: 119
>> +
>> +patternProperties:
>> + "-state$":
>> + oneOf:
>> + - $ref: "#/$defs/qcom-sc7180-tlmm-state"
>> + - patternProperties:
>> + "-pins$":
>> + $ref: "#/$defs/qcom-sc7180-tlmm-state"
>> + additionalProperties: false
>> +
>> +$defs:
>> + qcom-sc7180-tlmm-state:
>> + type: object
>> + description:
>> + Pinctrl node's client devices use subnodes for desired pin configuration.
>> + Client device subnodes use below standard properties.
>> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
>> +
>> + properties:
>> + pins:
>> + description:
>> + List of gpio pins affected by the properties specified in this
>> + subnode.
>> + items:
>> + oneOf:
>> + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$"
>> + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
>> + sdc2_cmd, sdc2_data, ufs_reset ]
>> + minItems: 1
>> + maxItems: 36
>> +
>> + function:
>> + description:
>> + Specify the alternative function to be configured for the specified
>> + pins.
>> +
>> + enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0,
>> + atest_char1, atest_char2, atest_char3, atest_tsens,
>> + atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
>> + atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
>> + atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
>> + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
>> + cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0,
>> + ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1,
>> + gcc_gp2, gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx,
>> + jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync,
>> + mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1,
>> + mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, PLL_BIST,
>> + pll_bypassnl, pll_reset, prng_rosc, qdss, qdss_cti,
>> + qlink_enable, qlink_request, qspi_clk, qspi_cs, qspi_data,
>> + qup00, qup01, qup02_i2c, qup02_uart, qup03, qup04_i2c,
>> + qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, qup12,
>> + qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, sdc2_tb,
>> + sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
>> + tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, usb_phy, vfr_1,
>> + _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0,
>> + wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
>> +
>> + drive-strength:
>> + enum: [2, 4, 6, 8, 10, 12, 14, 16]
>> + description:
>> + Selects the drive strength for the specified pins, in mA.
>
> Again, why do you need to duplicate. The yaml is weak in me, but I
> think you're effectively subclassing
> "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state", right? It has the
> exact same definition of drive-strength. Why duplicate it?

Yes, this can be dropped.

>
>
>> + bias-pull-down: true
>> + bias-pull-up: true
>> + bias-disable: true
>> + input-enable: true
>> + output-high: true
>> + output-low: true
>
> Again, maybe the above properties aren't needed? Don't you inherit
> them from tlmm-common?

From tlmm-common yes, however without this and
additionalProperties:false we would accept everything from pincfg-node
which too much. The binding/hardware does not support all of them, I think.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-10-16 18:30    [W:0.111 / U:1.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site